O3 Labs

Ferramentas do usuário

Ferramentas do site

Visitou:
ont:tplink:xz000-g7-br-v1

Diferenças

Aqui você vê as diferenças entre duas revisões dessa página.

Link para esta página de comparações

Próxima revisão		Revisão anterior
ont:tplink:xz000-g7-br-v1 [2024/12/19 17:47] – criada tripleoxygenont:tplink:xz000-g7-br-v1 [2025/02/20 09:40] (atual) – [Bugs, dicas e notas] tripleoxygen
Linha 10: Linha 10:
  
 ===== Hardware ===== ===== Hardware =====
 +
 +{{:ont:tplink:tplink-xz000-g7-br-v1-front.jpg?direct&400 |}}
 +{{ :ont:tplink:tplink-xz000-g7-br-v1-back.jpg?direct&400|}}
  
 ---- ----
  
-^ SoC | - | +^ SoC | Galachip GC1601A - CPU: 1x ARM FA626TE (ARMv5TE) @ 533 MHz | 
-^ RAM | - | +^ RAM | 32 MB (embedded) | 
-^ Flash | - |+^ Flash | 4 MB - EN25QH32B |
 ^ LAN | 1 Gbit/s | ^ LAN | 1 Gbit/s |
 ^ USB | - | ^ USB | - |
 ^ Wireless 2.4 GHz| - | ^ Wireless 2.4 GHz| - |
 ^ Wireless 5 GHz| - | ^ Wireless 5 GHz| - |
-^ Laser Driver/Transceiver | - |+^ Laser Driver/Transceiver | UX3320S |
 ^ Acoplamento fibra | SC/APC | ^ Acoplamento fibra | SC/APC |
 ^ FXS | - | ^ FXS | - |
Linha 37: Linha 40:
 ^ OMCC Version | 160 (0xA0) | ^ OMCC Version | 160 (0xA0) |
 ^ Software Version (Main, example) | V0.1.0-3.0.0 | ^ Software Version (Main, example) | V0.1.0-3.0.0 |
-^ Software Version (Standby, example) | - |+^ Software Version (Standby, example) | V0.2.0-3.0.0 |
  
 ===== Bootlog ===== ===== Bootlog =====
Linha 44: Linha 47:
  
 <code> <code>
 +
 +BOOT MODE: SPI-NOR
 +
 +Boot from Offset 0: Done.
 +
 +
 +ddr init done!
 +controller locked!
 +4
 +
 +U-Boot V1.2.3 (Apr 21 2023 - 16:06:13 +0800)
 +
 +CPU:   Galachip 1601
 +Model: GC1601
 +DRAM:  32 MiB
 +*** Warning - default environment, using default environment
 +
 +OK
 +In:    serial
 +Out:   serial
 +Err:   serial
 +Net:   eth0
 +Hit any key to stop autoboot:  0
 +Start Multicast upgrade detect...
 +LAN init sucessfully
 +Detecting multicast upgrade packets,wait=3000ms
 +Multicast Listening done!
 +SF: Detected en25qh32b(id: 0x1c7016) with page size 256 Bytes, erase size 64 KiB, total 4 MiB
 +Fix Flash size to FLASH_SIZE
 +[board/galachip1601/galachip_spi.c] do_boot: 746 do_boot will call do_spi_flash_autoboot
 +[board/galachip1601/galachip_spi.c] do_spi_flash_autoboot: 149 argv[1] is  41000000 ...,argc is 2 
 +[board/galachip1601/galachip_spi.c] do_spi_flash_autoboot: 152 addr is  41000000 ...
 +[board/galachip1601/galachip_spi.c] do_spi_flash_autoboot: 161 spiFlash->size is  400000 ...
 +[board/galachip1601/galachip_spi.c] do_spi_flash_autoboot: 168 after addr map_physmem  buf is  41000000 ...
 +[board/galachip1601/galachip_spi.c] do_spi_flash_autoboot: 210  spi_flash_read IMAGE_TAG offset is 20000
 +[board/galachip1601/galachip_spi.c] do_spi_flash_autoboot: 215 IMAGE_TAG.kernelLen + sizeof(IMAGE_TAG) is 1422776
 +
 +[board/galachip1601/galachip_spi.c] do_spi_flash_autoboot: 219 env_cmd is console=ttyS0,115200n8 root=/dev/mtdblock3 mtdparts=a0000000.ftspi020:4096k@0x0(whole),128k@0x0(uboot),1472k@0x20000(kernel),2304k@0x190000(rootfs),128k@0x3d0000(misc),64k@0x3f0000(hwconfig) init=/sbinOK
 +[common/bootm.c] do_bootm_states: 554 do_bootm_states will callbootm_find_os,argv[0] is 0x41000200 
 +[common/bootm.c] do_bootm_states: 554 do_bootm_states will callbootm_find_os,argv[0] is 0x41000200 
 +
 +Starting kernel ...
 +
 +Booting Linux on physical CPU 0x0
 +Linux version 3.16.0 (root@313cb039605f) (gcc version 4.9.4 (crosstool-NG 1.24.0) ) #1 PREEMPT Fri Apr 21 16:06:37 CST 2023
 +CPU: FA626TE [66056263] revision 3 (ARMv5TE), cr=0000397f
 +CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
 +Machine model: GC1601
 +Memory policy: Data cache writeback
 +DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 7104
 +Kernel command line: console=ttyS0,115200n8 root=/dev/mtdblock3 mtdparts=a0000000.ftspi020:4096k@0x0(whole),128k@0x0(uboot),1472k@0x20000(kernel),2304k@0x190000(rootfs),128k@0x3d0000(misc),64k@0x3f0000(hwconfig) init=/sbin/init mem=32M bootv=V1.2.3(04/21/2023-16:06:13) rootwait user_debug=0xff
 +PID hash table entries: 128 (order: -3, 512 bytes)
 +Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 +Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 +Memory: 24236K/28672K available (2776K kernel code, 175K rwdata, 812K rodata, 126K init, 149K bss, 4436K reserved)
 +Virtual kernel memory layout:
 +    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
 +    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
 +    vmalloc : 0xc2800000 - 0xff000000   ( 968 MB)
 +    lowmem  : 0xc0000000 - 0xc2000000   (  32 MB)
 +    modules : 0xbf000000 - 0xc0000000   (  16 MB)
 +      .text : 0xc0008000 - 0xc038940c   (3590 kB)
 +      .init : 0xc038a000 - 0xc03a9818   ( 127 kB)
 +      .data : 0xc03aa000 - 0xc03d5fc0   ( 176 kB)
 +       .bss : 0xc03d5fcc - 0xc03fb4cc   ( 150 kB)
 +Preemptible hierarchical RCU implementation.
 +NR_IRQS:256
 +faraday,enable dying gasp
 +CPU: 533 MHz, DDR MCLK: 400 MHz, ACLK: 133 MHz, PCLK: 133 MHz SPICLK: 200 MHz
 +sched_clock: 32 bits at 133MHz, resolution 7ns, wraps every 32212254712ns
 +Calibrating delay loop... 530.84 BogoMIPS (lpj=2654208)
 +pid_max: default: 32768 minimum: 301
 +Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
 +Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
 +CPU: Testing write buffer coherency: ok
 +Setting up static identity map for 0x402a45c8 - 0x402a4610
 +devtmpfs: initialized
 +pinctrl core: initialized pinctrl subsystem
 +NET: Registered protocol family 16
 +DMA: preallocated 256 KiB pool for atomic coherent allocations
 +Switched to clocksource fttmr010_clksrc
 +NET: Registered protocol family 2
 +TCP established hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP: Hash tables configured (established 1024 bind 1024)
 +TCP: reno registered
 +UDP hash table entries: 256 (order: 0, 4096 bytes)
 +UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
 +NET: Registered protocol family 1
 +futex hash table entries: 256 (order: -1, 3072 bytes)
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +msgmni has been set to 47
 +io scheduler noop registered
 +io scheduler deadline registered
 +io scheduler cfq registered (default)
 +ftgpio010 90900000.gpio: Start ftgpio010.
 +Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
 +console [ttyS0] disabled
 +90400000.serial: ttyS0 at MMIO 0x90400000 (irq = 12, base_baud = 2062500) is a 16550A
 +console [ttyS0] enabled
 +ftspi020 a0000000.ftspi020: ctrl reg 0x00000081, icr reg 0x00003302
 +ftspi020 a0000000.ftspi020: reg base 0xc2810000, irq 14, tx fifo 64 rx fifo 64
 +ftspi020 a0000000.ftspi020: tx transfer 256, rx transfer 256
 +ftspi020 a0000000.ftspi020: found en25qh32b, expected at25fs010
 +ftspi020 a0000000.ftspi020: en25qh32b (id: 0x1c7016, 4096 Kbytes)
 +ftspi020 a0000000.ftspi020: mtd .name = a0000000.ftspi020, .size = 0x400000 (4MiB), .erasesize = 0x00001000 (4KiB) .numeraseregions = 0
 +6 cmdlinepart partitions found on MTD device a0000000.ftspi020
 +Creating 6 MTD partitions on "a0000000.ftspi020":
 +0x000000000000-0x000000400000 : "whole"
 +0x000000000000-0x000000020000 : "uboot"
 +0x000000020000-0x000000190000 : "kernel"
 +0x000000190000-0x0000003d0000 : "rootfs"
 +0x0000003d0000-0x0000003f0000 : "misc"
 +0x0000003f0000-0x000000400000 : "hwconfig"
 +input: soc:sys-buttons as /devices/soc/soc:sys-buttons/input/input0
 +i2c /dev entries driver
 +hs = 0  burst = 0
 +ftiic010 90600000.i2c0: irq 2, mapped at c2812000, clk 133333333
 +ftwdt010 90800000.wdt: clkrate = 133333333  timeout =10  counter = 0x4f790d52
 +ftwdt010 90800000.wdt: start watchdog timer
 +ftwdt010 90800000.wdt: irq 13, mapped at c2814000, clk 133333333
 +ftwdt010 90800000.wdt: creat /proc/watchdog/gcwdt_status ok
 +ftwdt010 90800000.wdt: watchdog active, reset enabled, irq enabled
 +softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
 +Netfilter messages via NETLINK v0.30.
 +nf_conntrack version 0.5.0 (378 buckets, 1512 max)
 +ctnetlink v0.93: registering with nfnetlink.
 +nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
 +nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
 +xt_time: kernel timezone is -0000
 +ip_tables: (C) 2000-2006 Netfilter Core Team
 +arp_tables: (C) 2002 David S. Miller
 +TCP: cubic registered
 +NET: Registered protocol family 10
 +ip6_tables: (C) 2000-2006 Netfilter Core Team
 +NET: Registered protocol family 17
 +Bridge firewalling registered
 +Ebtables v2.0 registered
 +8021q: 802.1Q VLAN Support v1.8
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
 +devtmpfs: mounted
 +Freeing unused kernel memory: 124K (c038a000 - c03a9000)
 +Register flash device: flash0
 +cp: can't stat '/usr/etc': No such file or directory
 +rcS (31): drop_caches: 3
 +ifconfig: SIOCSIFADDR: No such device
 +ifconfig: ioctl 0x8913 failed: No such device
 +ifconfig: SIOCSIFMTU: No such device
 +/etc/init.d/rcS: /etc/init.d/rcS.galachip: line 12: can't create /proc/tso_lan/rule: nonexistent directory
 +interface eth0 does not exist!
 +interface eth1 does not exist!
 +interface pon does not exist!
 +ifconfig: SIOCSIFMTU: No such device
 +ifconfig: SIOCSIFMTU: No such device
 +ifconfig: SIOCSIFMTU: No such device
 +ifconfig: SIOCSIFMTU: No such device
 +ifconfig: SIOCSIFMTU: No such device
 +ifconfig: SIOCSIFMTU: No such device
 +ifconfig: SIOCSIFMTU: Invalid argument
 +drop_caches 3 
 +rcS (31): drop_caches: 3
 +change for  kernel panic reboot time
 +/etc/init.d/rcS: /etc/init.d/rcS.galachip: line 41: can't create /proc/sys/kernel/watchdog_thresh: nonexistent directory
 +rcS.sdk init done!
 +creat_domain_proc  ok
 +tp_domain init ok
 +cp: can't stat '/etc/cloud/cloud_service.cfg': No such file or directory
 +rcS init done!
 +==================gc rcs=====================
 +mount: mounting /proc on /proc failed: Device or resource busy
 +mount: mounting /sys on /sys failed: Device or resource busy
 +cp: can't stat '/opt/www/css': No such file or directory
 +mount: mounting tmpfs on /opt/www/css failed: No such file or directory
 +cp: can't stat '/tmp/css/*': No such file or directory
 +cp: can't stat '/opt/www/image': No such file or directory
 +mount: mounting tmpfs on /opt/www/image failed: No such file or directory
 +cp: can't stat '/tmp/image/*': No such file or directory
 +Run init.d/rcS!
 +[libgc Error][src/libgc_sys_api.c:120][libgc_sys_readMtdData]:Error open mtd 
 +[libgc Error][src/libgc_sys_api.c:413][libgc_sys_getImageHeader]:Read rootfs header fail
 +sys load success
 +bob:BOSA Chip Type: UX3320S.
 +bob:read data from /var/gc_bob.bin
 +mkdir: can't create directory '/dev/pts': File exists
 +mount: mounting devpts on /dev/pts failed: Device or resource busy
 +random: nonblocking pool is initialized
 +xpon_sdk 90c00000.xpon_sdk: register io begin 90c00000, with size 16777216
 +xpon_sdk 90c00000.xpon_sdk: map source to c3000000
 +xpon_sdk 90c00000.xpon_sdk: register io(mdio) begin 90c00000, with size 16777216
 +xpon_sdk 90c00000.xpon_sdk: map source to c2836000
 +xpon_sdk 90c00000.xpon_sdk: get platform irq 20
 +xpon_sdk 90c00000.xpon_sdk: get platform irq 18
 +xpon_sdk 90c00000.xpon_sdk: get platform irq 19
 +xpon_sdk 90c00000.xpon_sdk: get platform irq 21
 +xpon_sdk 90c00000.xpon_sdk: get platform irq 22
 +xpon_sdk 90c00000.xpon_sdk: get platform irq 23
 +xpon_sdk 90c00000.xpon_sdk: driver initialized with version 20012
 +xpon_sdk 90c00000.xpon_sdk: chip id 1
 +try to auto detect wan mode!
 +
 +sdk_reserve_ddr_init(141) ddr buffer use 4079616
 +sdk_reserve_ddr_init(160) phys c4800000(virt 41c00000) map to dma 44800000
 +gpon move from O1 to O1
 +
 +local_gpon_los_state_report(302) sdk_nl_send_event failed ret -22!
 +sdk_config_wandev_op(95) dev not exist!
 +chipset_epon_stack_sta_change(46) epon stack move from init to init
 +faraday_phy_init(257) got phy_dbg_reg 91400008
 +libphy: gala_mdio: probed
 +SC PLL lock as gpon!
 +Serdes PHY Ready!
 +local_gpon_los_state_report(302) sdk_nl_send_event failed ret -22!
 +wan_state_change_notify(69) sdk_nl_send_event failed ret -22!
 +wan_state_change_notify(72) report wan state changed!
 +gcnet: module license 'Proprietary' taints kernel.
 +Disabling lock debugging due to kernel taint
 +Net Device 1.0.0 Init
 +Net Device Init Success!
 +Pon Mapping 1.0.0 Init
 +Pon Mapping 1.0.0 Init Success!
 +==================S10ethernet=====================
 +device br0 already exists; can't create bridge with the same name
 +device eth0 entered promiscuous mode
 +device eth0.0 entered promiscuous mode
 +device pon0 entered promiscuous mode
 +device pon0.0 entered promiscuous mode
 +br0: port 2(pon0.0) entered forwarding state
 +br0: port 2(pon0.0) entered forwarding state
 +br0: port 1(eth0.0) entered forwarding state
 +br0: port 1(eth0.0) entered forwarding state
 +==================for omci/oam=====================
 +bind to group 0!
 +br0: port 1(eth0.0) entered disabled state
 +/etc/init.d/rcS: line 269: mini_httpd: not found
 +=================cos init after sdk init=====
 +=================disable button func in gcs=====
 +sys button success
 +
 +Please press Enter to activate this console. insmod: can't insert '/lib/modules/3.16.0/extra/gcponmap.ko': File exists
 +killall: gcwatchdog: no process killed
 +killall: gchwdog: no process killed
 +/bin/sh: gcwatchdog: not found
 +/bin/sh: igmpd: not found
 +hello world! This is gc_omcid.
 +skip_fdb_ageing=0
 +set ageing time=300s
 +[libgc Error][src/libgc_switch_api.c:33][libgc_switch_ioctl]:ioctl fail cmd = 1074024964  subCmd=2 ret=-1
 +/bin/sh: ip: not found
 +add wan info index 0
 +/bin/sh: /sbin/dnsmasq: not found
 +Interface name length cannot exceed 15 characters.
 +[ dm_readFile ] 2308 - ERROR:  can not open xml file /var/tmp/pc/reduced_data_model.xml!, about to open file /etc/reduced_data_model.xml
 +[ dm_postHook ] 942 - ERROR:  X_TP_ConfigVersion 5a000002, X_TP_DMVersion 5a000002
 +[ cos_init ] 498 - ERROR:  Disable gpon driver before true SN set
 +
 +/bin/sh: can't create /proc/gpon/debug: nonexistent directory
 +[ waitOmciInit ] 239 - ERROR:  COS wait for OMCI init...
 +
 +[ cos_init ] 535 - ERROR:  ======no will kill some app============
 +
 +[ cos_init ] 574 - ERROR:  ======no will kill some app2============
 +
 +[ oal_sys_readMacFlash ] 5060 - ERROR:  pMac is XX:XX:XX:XX:XX:XX
 +
 +[ rsl_initDevInfo ] 1517:  === softwareVersion 0.1.0 3.0.0 v6099.0 Build 230421 Rel.58646n ===
 +[ rsl_initDevInfo ] 1544:  === hardwareVersion XZ000-G7 v1.0 00000000 ===
 +[ oal_sys_readMacFlash ] 5060 - ERROR:  pMac is XX:XX:XX:XX:XX:XX
 +
 +/bin/sh: ntpc: not found
 +[ dm_shmInit ] 101 - ERROR:  shared memory already exist.
 +/bin/sh: dnsProxy: not found
 +killall: dnsmasq: no process killed
 +/bin/sh: dnsmasq: not found
 +tx omci too small 
 + ptr:c155f700:
 +72 65 67 69 73 74 65 72 
 +
 +bind to group 0!
 +[ rsl_time_ntpStart ] 417:  Current dns svr: 
 +[ oal_sys_getOldTZInfo ] 2443 - ERROR:  Open TZ file error!
 +[ rsl_time_ntpStart ] 417:  Current dns svr: 
 +/bin/sh: dhcpc: not found
 +device br0 already exists; can't create bridge with the same name
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +[ oal_sys_readMacFlash ] 5060 - ERROR:  pMac is XX:XX:XX:XX:XX:XX
 +
 +before send out event 677, gcs_task gcs_task, msqid 163845, pid227=============================
 +/bin/sh: radvd: not found
 +[ rsl_setUpDev2BridgePortObj ] 796:  eth0.0 isWanConn=0 moveIntfToBr0=0 br0
 +device eth0.0 is already a member of a bridge; can't enslave it to bridge br0.
 +[ util_getObjFromFullpath ] 1327 - ERROR:  Failed to get object from fullPath, because oid is not equal.
 +[ ethLink_isLowLayerWithSameIfname ] 394:  perror:1
 +[libgc Error][src/libgc_sys_api.c:120][libgc_sys_readMtdData]:Error open mtd 
 +[libgc Error][src/libgc_sys_api.c:413][libgc_sys_getImageHeader]:Read rootfs header fail
 +[1451606425.689]gcomci: wrapperInitUpgradeFile()#196 omci upgrade file is not exist
 +
 +[1451606425.689]gcomci: wrapperInitUpgradeFile()#199 create file fail
 +[1451606425.689]gcomci: gcOmciMe_callback_autoCreat_softwareimage()#357 Init Upgrade File Fail
 +[1451606425.691]gcomci: gcOmciMe_callback_autoCreat_softwareimage()#367 activeImage:0,commitImage:0,version:V0.1.0-3.0.0
 +
 +[ dm_getParamValue ] 1298 - ERROR:  Get instance description failed. object name = Interface
 +[ rsl_buildAdtWanMapList ] 8443:  perror:9805
 +[ rsl_adt_syncWanObj ] 9362:  perror:9805
 +[ rsl_adt_syncObj ] 498 - ERROR:  Failed to sync DEV2_ADT_WAN
 +[ oal_util_setProcLanAddr ] 312 - ERROR:  ip_conntrack module is not loaded, or we did not open the CONFIG_NF_CT_LOCAL_LIMIT_ENTRY
 +
 +[ stat_setsockopt ] 217 - ERROR:  statSetsockopt: 262 opt error
 +
 +[ oal_stat_addNetInfo ] 768 - ERROR:  Failed to call stat_setsockopt
 +[ oal_ip6_getIntfAddr ] 398 - ERROR:  Can't find interface: br0
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +/bin/sh: radvd: not found
 +sendto: No such file or directory
 +line(593) Msg.type(2030) pid(232) errno(2) ret(-1)
 +sendto: No such file or directory
 +line(593) Msg.type(2030) pid(232) errno(2) ret(-1)
 +[1451606426.897]gcomci: main()#414 ready to receive omci message!!!
 +
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +[ dm_getObj ] 743 - ERROR:  Get instance description failed. object name = Interface
 +[ dm_getObj ] 744:  1#6
 +[ rsl_getObj ] 1315:  perror:9805
 +[ rsl_intfStack_getIfNameFromLoLayers ] 559:  perror:9805
 +[ ethLink_createParam ] 609 - ERROR:  Failed to get intfName from lowerLayer(Device.Ethernet.Interface.6.) path, ret(9805).
 +[ rsl_initDev2EthLinkObj ] 1676 - ERROR:  Failed to create the parameter for EthLink obj, ret(9805).
 +[ dm_getObj ] 743 - ERROR:  Get instance description failed. object name = Interface
 +[ dm_getObj ] 744:  1#6
 +[ rsl_getObj ] 1315:  perror:9805
 +[ rsl_intfStack_getIfNameFromLoLayers ] 559:  perror:9805
 +[ ethLink_createParam ] 609 - ERROR:  Failed to get intfName from lowerLayer(Device.Ethernet.Interface.6.) path, ret(9805).
 +[ rsl_initDev2EthLinkObj ] 1676 - ERROR:  Failed to create the parameter for EthLink obj, ret(9805).
 +[ rsl_initDev2GponAuthCtc ] 1064 - ERROR:  Init loid tplink passwd tplink
 +
 +/bin/sh: upnpd: not found
 +[ stat_setsockopt ] 217 - ERROR:  statSetsockopt: 257 opt error
 +
 +[ rsl_setObj ] 1476:  perror:4510
 +[ rsl_initDev2StatCfgObj ] 208:  perror:4510
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_ftp.ko': No such file or directory
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_nat_ftp.ko': No such file or directory
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_proto_gre.ko': No such file or directory
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_pptp.ko': No such file or directory
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_tftp.ko': No such file or directory
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_nat_tftp.ko': No such file or directory
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_h323.ko': No such file or directory
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_h323.ko': No such file or directory
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_rtsp.ko': No such file or directory
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/ipv4/netfilter/nf_nat_rtsp.ko': No such file or directory
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_conntrack_sip.ko': No such file or directory
 +insmod: can't insert '/lib/modules/kmdir/kernel/net/netfilter/nf_nat_sip.ko': No such file or directory
 +ip6tables: Too many links.
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +killall: gcwatchdog: no process killed
 +killall: gchwdog: no process killed
 +/bin/sh: gcwatchdog: not found
 +xmlShm init success.
 +gcloop_detect_debug=0x4
 +[main:671]: xmlShm init success.
 +
 +destMac Broadcast, etherType 0x880a, interv time: 1000, closing time 60,loopBackEnable 1, alarmEnable 1, portDisloopEnable 1,vlanTag untagged
 +iptables: Bad rule (does a matching rule exist in that chain?).
 +ip6tables: Bad rule (does a matching rule exist in that chain?).
 +[ dm_getObj ] 743 - ERROR:  Get instance description failed. object name = Chain
 +[ dm_getObj ] 744:  1#4
 +[ refreshChainRules ] 915 - ERROR:  get chain from dm failed. errno 9805.
 +[ rsl_initDev2FirewallObj ] 2477 - ERROR:  init port filtering failed. errno 9805.
 +[ rdp_init ] 462 - ERROR:  ======rsl_initEnd no will kill some app============
 +
 +killall: upnpd: no process killed
 +killall: igmpd: no process killed
 +killall: ntpc: no process killed
 +killall: dnsProxy: no process killed
 +sh (806): drop_caches: 3
 +[ rdp_init ] 476 - ERROR:  ======kill end ============
 +
 +/bin/sh: can't create /proc/tplink/eth_forward: nonexistent directory
 +/bin/sh: ethphxcmd: not found
 +/bin/sh: ethphxcmd: not found
 +/bin/sh: ethphxcmd: not found
 +/bin/sh: ethphxcmd: not found
 +/bin/sh: ethphxcmd: not found
 +/bin/sh: ethphxcmd: not found
 +[ cos_init ] 579 - ERROR:  ======no will kill some app3============
 +
 +/bin/sh: can't create /proc/pon_phy/debug: nonexistent directory
 +/bin/sh: can't create /proc/ux3320s/debug: nonexistent directory
 +sh: write error: Invalid argument
 +sh: write error: Invalid argument
 +sh: write error: Invalid argument
 +sh: write error: Invalid argument
 +sh: write error: Invalid argument
 </code> </code>
  
Linha 74: Linha 472:
  
 ===== Bugs, dicas e notas ===== ===== Bugs, dicas e notas =====
 +
 +  * Alguns dos utilitários mais importantes para configurar o aparelho via //telnet/shell// são:
 +    * gccli
 +    * gc_omcicli
 +    * gcsUtil
 +  * Por padrão, a saída de vários comandos (como o gc_omcicli) é direcionada para a UART/serial do aparelho. Para redirecionar a saída para a sessão atual - telnet, por exemplo - execute antes:
 +
 +  gccli consoleRedir on
 +
 +  * Após o comando acima, algumas consultas úteis podem ser feitas, ex:
 +
 +  gc_omcicli mib get 84
 +  gc_omcicli mib get 171
 +  gc_omcicli stats dump
 +
 +  * Curiosidade: o aparelho aparentemente suporta as (algumas?) extensões proprietárias da Huawei, portanto ele deve funcionar em locais com OLT Huawei que exigem estas extensões. Veja:
 +
 +  gc_omcicli mib get 350
 +  gc_omcicli mib get 370
 +  gc_omcicli mib get 373
 +
 +
  
 ===== Firmwares ===== ===== Firmwares =====
Linha 81: Linha 501:
 Versões oficiais e não modificadas para o aparelho. São de propriedade do fabricante - que detém todos os direitos sobre elas - e mantidas aqui apenas em caráter de arquivamento e espelhamento, podendo ser removidas caso solicitado pelos representantes oficiais da empresa. Versões oficiais e não modificadas para o aparelho. São de propriedade do fabricante - que detém todos os direitos sobre elas - e mantidas aqui apenas em caráter de arquivamento e espelhamento, podendo ser removidas caso solicitado pelos representantes oficiais da empresa.
  
 +Para versões mais recentes ou não listadas aqui, consultar o site oficial: [[https://anon.to/?https://www.tp-link.com/br/support/download/xz000-g7/v1/|TP-Link]]
 ==== Custom ==== ==== Custom ====
  
Linha 89: Linha 510:
 </WRAP> </WRAP>
  
 +Versões modificadas com correções e/ou melhorias, baseadas em //releases// oficiais/stock. As versões são cumulativas, ou seja, a mais recente sempre contém também todas as modificações das versões anteriores.
 +
 +É possível atualizar entre versões custom ou stock sem nenhum problema. Note que saltos na versão base podem incluir ou remover parâmetros de configuração, portanto é aconselhável um //factory reset// após realizar tais atualizações. Adicionalmente, efetue estes procedimentos com a fibra **desconectada** do aparelho.
 +
 +Caso a versão base continue a mesma de uma versão custom para a outra, não é necessário o //factory reset//, salvo se solicitado explicitamente na descrição.
 +
 +=== 1.0 ===
 +
 +  * Baseada no release oficial XZ000-G7(BR)_V1_Build 230927
 +  * Substitui o utilitário restrito //cli// pelo shell //sh// quando o aparelho é acessado via //telnet//. O utilitário pode ser acessado novamente se necessário executando "//cli//" a partir do shell, logando com a senha cadastrada via web (do //admin// ou //superadmin//, dependendo de qual tenha criado). Para as credenciais via //telnet//, agora são:
 +    * root / root
 +  * Em [[#bugs_dicas_e_notas|Bugs, dicas e notas]] há alguns comandos agora disponíveis com o acesso //shell//.
 +
 +[[https://tripleoxygen.net/files/devices/tplink/xz000-g7-br-v1/firmware/custom/XZ000-G7_UP_BOOT_2023-09-27_09.09.37_v1.0.bin|XZ000-G7_UP_BOOT_2023-09-27_09.09.37_v1.0.bin]]\\ [[https://tripleoxygen.net/files/devices/tplink/xz000-g7-br-v1/firmware/custom/XZ000-G7_UP_BOOT_2023-09-27_09.09.37_v1.0.bin.minisig|XZ000-G7_UP_BOOT_2023-09-27_09.09.37_v1.0.bin.minisig]]
 ===== Agradecimentos ===== ===== Agradecimentos =====
  
ont/tplink/xz000-g7-br-v1.1734641263.txt.gz · Última modificação: 2024/12/19 17:47 por tripleoxygen