O3 Labs

Ferramentas do usuário

Ferramentas do site

Visitou:
ont:nokia:g-010g-p

Diferenças

Aqui você vê as diferenças entre duas revisões dessa página.

Link para esta página de comparações

Próxima revisão		Revisão anterior
ont:nokia:g-010g-p [2025/03/07 12:37] – criada tripleoxygenont:nokia:g-010g-p [2025/03/07 16:10] (atual) – [Configurações] tripleoxygen
Linha 10: Linha 10:
  
 ===== Hardware ===== ===== Hardware =====
 +
 +{{:ont:nokia:nokia-g-010g-p-front.jpg?direct&400 |}}
 +{{ :ont:nokia:nokia-g-010g-p-back.jpg?direct&400|}}
  
 ---- ----
Linha 33: Linha 36:
 ==== GPON ==== ==== GPON ====
  
 +^ Tipo | SFU (Ethernet UNI: 1 \ VEIP: 0) |
 +^ Vendor ID | ALCL |
 +^ Version | 3FE45458BDAA01 |
 +^ Equipment ID | %%__________G-010G-P__%% |
 +^ OMCC Version | 160 (0xA0) |
 +^ Software Version (Main, example) | 3FE45655BOCK74 |
 +^ Software Version (Standby, example) | 3FE45655BOCK56 |
  
 ===== Bootlog ===== ===== Bootlog =====
Linha 39: Linha 49:
  
 <code> <code>
 +CIG Version: 3.04.30
 +
 +U-Boot 2011.12.NA-svn137366 (May 21 2020 - 19:55:08)
 +
 +Board: RTL9601B CPU:100MHz LX:200MHz DDR2:325MHz...
 +SPI-F: 1x16 MB (plr_flash_info @ 9f0028c0)
 +[debug] start to init flash_info (1)
 +[debug] <0> unit size=0x10000, unit count=256
 +*** Warning - bad CRC, using default environment
 +
 +--major = a9, minor = 21
 +--major = a9, minor = 21
 +*** !!! Check Result: EEPA and EEPB are all valid
 +Device care eqvid: 3FE45458BDAA, Init serial
 +Net:   LUNA GMAC
 +Warning: eth device name has a space!
 +
 +swcore_init
 +**************************************
 +*                                    *
 +*  KEY -- Enter console terminal     *
 +*                                    *
 +**************************************
 +waiting for your select
 +do_jffs2_fsload offset 0x80400000 loadaddr=0xbd088000..
 +get loadbit 0,bootbit 0
 +Get current Image = ImageB..
 +
 +--- jffs2_part_info: partition number 3 for device sflash0 (sflash.0)
 +
 +Loading 'uImage' from  CRAMFS Partition 'imageb' to 0x80400000.
 +
 +Root Filesystem crc check successfully!
 +
 +
 +PRODUCT:  sfu
 +SS  :  noss
 +DSP :  nodsp
 +WIFI:  nowifi
 +XDSL:  nodsl
 +Software version:  3FE45655BOCK74
 +## Booting kernel from Legacy Image at 80400000 ...
 +   Image Name:   Linux Kernel Image
 +   Created:      2015-12-11   6:28:09 UTC
 +   Image Type:   MIPS Linux Kernel Image (gzip compressed)
 +   Data Size:    1440099 Bytes = 1.4 MB
 +   Load Address: 80000000
 +   Entry Point:  80000000
 +   Verifying Checksum ... OK
 +   Uncompressing Kernel Image ... OK
 +
 +Starting kernel ...
 +
 +Linux version 2.6.30.9-cig-sfu-1 (taojipeng@sw1-dev) (gcc version 4.4.6 (Realtek RSDK-1.5.6p2) ) #1 Fri Dec 11 11:48:11 CST 2015
 +CPU revision is: 0000dc02
 +Determined physical RAM map:
 + memory: 03800000 @ 00000000 (usable)
 +User-defined physical RAM map:
 + memory: 03f00000 @ 00000000 (usable)
 +Zone PFN ranges:
 +  Normal   0x00000000 -> 0x00003f00
 +Movable zone start PFN for each node
 +early_node_map[1] active PFN ranges
 +    0: 0x00000000 -> 0x00003f00
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16002
 +Kernel command line: console=ttyS0,115200 mem=63M root=/dev/mtdblock3 mtdparts=sflash:512K@0x0(Boot),0x180000@0x80000(Config),7M@0x200000(ImageA),7M@0x900000(ImageB) rootfstype=cramfs hasEeprom=0 5srst=0 eqvid=3FE45458BDAA01
 +root_dev_setup line 179 root: /dev/mtdblock3
 +icache: 64kB/32B, dcache: 32kB/32B, scache: 0kB/0B
 +NR_IRQS:128
 +PID hash table entries: 256 (order: 8, 1024 bytes)
 +console [ttyS0] enabled
 +Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
 +Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
 +Memory: 60468k/64512k available (2448k kernel code, 3968k reserved, 653k data, 108k init, 0k highmem)
 +Calibrating delay loop... 97.79 BogoMIPS (lpj=48896)
 +Mount-cache hash table entries: 512
 +IMEM section size = 0x3244
 +net_namespace: 788 bytes
 +NET: Registered protocol family 16
 +bio: create slab <bio-0> at 0
 +Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
 +NET: Registered protocol family 2
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP established hash table entries: 2048 (order: 2, 16384 bytes)
 +TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
 +TCP: Hash tables configured (established 2048 bind 2048)
 +TCP reno registered
 +NET: Registered protocol family 1
 +Realtek GPIO Driver for Flash Reload Default
 +netlog: listening on port 4660
 +NTFS driver 2.1.29 [Flags: R/W].
 +JFFS2 version 2.2. (NAND) Â 2001-2006 Red Hat, Inc.
 +msgmni has been set to 118
 +alg: No test for stdrng (krng)
 +io scheduler noop registered
 +io scheduler deadline registered
 +io scheduler cfq registered (default)
 +Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
 +serial8250: ttyS0 at MMIO 0x0 (irq = 49) is a 16550A
 +loop: module loaded
 +PPP generic driver version 2.4.2
 +NET: Registered protocol family 24
 +===============================================================================
 +init_luna_nor_spi_map: flash map at 0xbd000000
 +luna spi probe...
 +luna SPI FLASH G2 driver version 1.00-II: NOR SPI-F... Generic 3B NOR SPI-F detected... done
 +master->name sflash
 +cmd: cmdlinepart
 +4 cmdlinepart partitions found on MTD device sflash
 +add luna nor spi partition
 +MTD partitions obtained from kernel command line
 +Creating 4 MTD partitions on "sflash":
 +0x000000000000-0x000000080000 : "Boot"
 +0x000000080000-0x000000200000 : "Config"
 +0x000000200000-0x000000900000 : "ImageA"
 +0x000000900000-0x000001000000 : "ImageB"
 +===============================================================================
 +u32 classifier
 +nf_conntrack version 0.5.0 (1008 buckets, 4032 max)
 +ip_tables: (C) 2000-2006 Netfilter Core Team
 +TCP cubic registered
 +Realtek SD2-FastPath v1.00beta_2.4.26-uc0
 +/proc/FastPath created
 +Realtek MCast FastPath
 +/proc/mc_FastPath created
 +NET: Registered protocol family 10
 +lo: Disabled Privacy Extensions
 +IPv6 over IPv4 tunneling driver
 +sit0: Disabled Privacy Extensions
 +ip6tnl0: Disabled Privacy Extensions
 +NET: Registered protocol family 17
 +Bridge firewalling registered
 +Ebtables v2.0 registered
 +VFS: Mounted root (cramfs filesystem) readonly on device 31:3.
 +Freeing unused kernel memory: 108k freed
 +
 +# num is 10,nothing need to do
 +ONT>SSP read eqvid :3FE45458BDAA01
 +Starting Application: 0x00002000, /bin/TimerMgr................Done.
 +Starting Application: 0x00001000, /bin/LogMgr................Done.
 +Vendor: SEMTECH, Part Number: 25L95, bosa ver = 40
 +laser status:82
 +Starting Application: 0x00007000, /bin/MiscMgr................Done.
 +starting to upgrade boot
 +open /bootimg/00a9_21_01 failed .
 +Check base image file CRC ... cal_crc (3a8d61f2) ori_crc (3a8d61f2) Success.
 +Mount Backup[/dev/mtdblock2] as cramfs...Success.
 +major ID[0xa9] minor ID[0x21]
 +cp: can't stat '/mnt/rwdir2/sys.log': No such file or directory
 +mv: can't create '/mnt/rwdir2/sys.log': Read-only file system
 +cp: can't stat '/mnt/rwdir2/sys.log': No such file or directory
 +mv: can't create '/mnt/rwdir2/sys.log': Read-only file system
 +receive MMR_MSG_SET_ACTIVE_IMAGE_ID
 +receive MMR_MSG_SET_COMMIT_IMAGE_ID
 +Starting Application: 0x00003000, /bin/MecMgr................Done.
 +Starting Application: 0x00004000, /bin/PonMgr................Done.
 +------>NET open default xml failedVOS_RegisterEventListener:2672, Init event socket 9
 +vos_OnKernelEvent:2593, Start receving event on socket 9
 +Starting Application: 0x00009000, /bin/NetMgr................Done.
 +Starting Application: 0x00005000, /bin/EthMgr................Done.
 +Starting Application: 0x0000c000, /bin/WebMgr................Done.
 +Laser TX OFF
 +Laser TX ON
 +Preparing stress ...
 +
 +INFO: ALL APPs are ready.
 +sh: can't create /var/log/messages: nonexistent directory
 +Receiving OMCI...
 +tick: 0x6ddb88f Warning: according form appInfo currentMsgData, request to reply an async message 0xc000b from NET to MEC
 </code> </code>
  
Linha 49: Linha 228:
 </WRAP> </WRAP>
  
 +Para configurar os parâmetros OMCI informados pelo aparelho, faça login via telnet (credenciais apresentadas no início da página) e execute no shell que inicia-se com "#ONT>":
  
 +  system
 +  misc
 +  
 +Com o prompt iniciando-se agora com "#ONT/system/misc>", execute os comandos conforme a necessidade, substituindo os valores de exemplo pelos seus:
 +
 +^ Comando ^ Descrição ^
 +| pon_passwd set "39383736353433323130" | Senha GPON/PLOAM (ASCII) |
 +| pon_passwd set 0x39383736353433323130 | Senha GPON/PLOAM (hex) |
 +| ctcloid set 303132333435363738393a | LOID (hex)  |
 +| ctcpassword set 0123456789a | Senha LOID (ASCII)  |
 +| eqsn set "ALCLf1f2f3f4" | Serial GPON |
 +| vendor set "ALCL" | Sigla/ID do fabricante. Será sobrescrito pelo aparelho a partir do serial GPON |
 +| eqvid set "3FE45458BDAA01" | Versão do equipamento. Também conhecido como "Hardware version"  |
 +| eqid set "%%__________G-010G-P__%%" | ID do equipamento |
 +
 +Para trocar a versão de software reportada, é necessário [[#acessando_o_shell|acessar o shell]], então execute:
 +
 +  echo "SWVER=3FE45655BOCK74" > /mnt/rwdir/sys.cfg
 +  
 +Remova o arquivo acima se necessário com:
 +
 +  rm /mnt/rwdir/sys.cfg
 +
 +Resete o aparelho após as modificações.
 ===== Bugs, dicas e notas ===== ===== Bugs, dicas e notas =====
 +
 +  * No CLI via telnet, utilize o comando **exit** para subir um nível na configuração, exemplo:
 +
 +  #ONT/system/shell>exit
 +  #ONT/system>  
 +
 +==== Acessando o shell ====
 +
 +Para acessar o shell Linux no aparelho, faça login via telnet (credenciais no topo da página) e execute:
 +
 +  system
 +  shell
 +  sh
 +
 +
  
 ===== Firmwares ===== ===== Firmwares =====
ont/nokia/g-010g-p.1741361855.txt.gz · Última modificação: 2025/03/07 12:37 por tripleoxygen