O3 Labs

Ferramentas do usuário

Ferramentas do site

Visitou:
modem:td5137

Diferenças

Aqui você vê as diferenças entre duas revisões dessa página.

Link para esta página de comparações

Próxima revisão		Revisão anterior
modem:td5137 [2017/06/12 21:13] – criada tripleoxygenmodem:td5137 [2022/11/07 08:31] (atual) – edição externa 127.0.0.1
Linha 34: Linha 34:
  
 <code> <code>
 +Start to decompress!
 +success!
 +
 +MitraStar RTL Platform BootLoader (jeff@sw1-tclinux)
 +DRAM Size: 256 Mb
 +Flash ID: 00C2:0020, Size: 128 Mb
 +Version 01.19.01 | Nov 23 2015 15:44:02
 +
 +Press 'ESC' to stop autoboot:  0
 +
 +Wait receive MultiBoot packet...  0
 +
 +Decompress file at 0xbd030080... SQUASHFSv4 ok!
 +Linux version 2.6.30.9-svn10809 (jimchen@sw15-server) (gcc version 4.4.7 (Realtek RSDK-1.5.8p1 Build 1050) ) #278 Fri Nov 25 15:20:38 CST 2016
 +CPU revision is: 0000dc01
 +Determined physical RAM map:
 + memory: 02000000 @ 00000000 (usable)
 +User-defined physical RAM map:
 + memory: 02000000 @ 00000000 (usable)
 +Zone PFN ranges:
 +  Normal   0x00000000 -> 0x00002000
 +Movable zone start PFN for each node
 +early_node_map[1] active PFN ranges
 +    0: 0x00000000 -> 0x00002000
 +Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
 +Kernel command line: console=ttyS0,115200 mem=32M root=31:3 ro
 +root_dev_setup line 184 root: 31:3
 +icache: 16kB/32B, dcache: 8kB/32B, scache: 0kB/0B
 +NR_IRQS:128
 +PID hash table entries: 128 (order: 7, 512 bytes)
 +Timer: Div=2, Data=1000000
 +console [ttyS0] enabled
 +Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
 +Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
 +Memory: 23028k/32768k available (3936k kernel code, 9740k reserved, 1209k data, 124k init, 0k highmem)
 +Calibrating delay loop... 448.92 BogoMIPS (lpj=2244608)
 +Mount-cache hash table entries: 512
 +IMEM section size = 0xb754
 +net_namespace: 788 bytes
 +NET: Registered protocol family 16
 +bio: create slab <bio-0> at 0
 +SCSI subsystem initialized
 +Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
 +NET: Registered protocol family 8
 +NET: Registered protocol family 20
 +NET: Registered protocol family 2
 +IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP established hash table entries: 1024 (order: 1, 8192 bytes)
 +TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
 +TCP: Hash tables configured (established 1024 bind 1024)
 +TCP reno registered
 +NET: Registered protocol family 1
 +Realtek GPIO Driver for Flash Reload Default
 +netlog: listening on port 4660
 +squashfs: version 4.0 (2009/01/31) Phillip Lougher
 +fuse init (API version 7.11)
 +msgmni has been set to 44
 +alg: No test for stdrng (krng)
 +io scheduler noop registered
 +io scheduler deadline registered
 +io scheduler cfq registered (default)
 +Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
 +serial8250: ttyS0 at MMIO 0x0 (irq = 13) is a 16550A
 +Driver 'sd' needs updating - please use bus_type methods
 +PPP generic driver version 2.4.2
 +NET: Registered protocol family 24
 +IMQ driver loaded successfully.
 + Hooking IMQ after NAT on PREROUTING.
 + Hooking IMQ before NAT on POSTROUTING.
 +tun: Universal TUN/TAP device driver, 1.6
 +tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
 +Realtek WLAN driver - version 3.3 (2016-03-01)(SVN:11078)
 +Adaptivity function - version 9.1
 +wlan0 (): not using net_device_ops yet
 +
 +
 +#######################################################
 +SKB_BUF_SIZE=2408 MAX_SKB_NUM=256
 +#######################################################
 +
 +wlan0-vap0 (): not using net_device_ops yet
 +wlan0-vap1 (): not using net_device_ops yet
 +wlan0-vap2 (): not using net_device_ops yet
 +wlan0-vap3 (): not using net_device_ops yet
 +pwlan0 (): not using net_device_ops yet
 +
 +
 +
 +Probing RTL8186 10/100 NIC-kenel stack size order[2]...
 +chip name: 8196B, chip revid: 0
 +NOT YET
 +Set threshould idx 0
 +Set threshould idx 1
 +eth0.2 (): not using net_device_ops yet
 +eth0.2 added. vid=9 Member port 0x1...
 +eth0.3 (): not using net_device_ops yet
 +eth0.3 added. vid=9 Member port 0x2...
 +eth0.4 (): not using net_device_ops yet
 +eth0.4 added. vid=9 Member port 0x4...
 +eth0.5 (): not using net_device_ops yet
 +eth0.5 added. vid=9 Member port 0x8...
 +flash device: 0x800000 at 0xbd000000
 +spi probe...
 +=================================
 +luna SPI FLASH driver version 0.6
 +=================================
 +SFCR:0xb8001200 SFCSR:0xb8001208 SFDR:0xb800120c
 +can not get SPI chip driver!
 +
 +MXIC matched!! i:1 DeviceSize:0x1000000
 +get SPI chip driver!
 +Physically mapped flash: Found an alies 0x1000000 for the chip at 0x0, mxic device detect.
 +Creating 10 MTD partitions on "Physically mapped flash":
 +0x000000000000-0x000000010000 : "boot"
 +0x000000010000-0x000000020000 : "config_hw"
 +0x000000020000-0x000000030000 : "config_cur"
 +mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
 +0x000000030080-0x00000055fc8d : "rootfs"
 +mtd: partition "backupfs" extends beyond the end of device "Physically mapped flash" -- size truncated to 0x80ff80
 +mtd: partition "backupfs" doesn't start on an erase block boundary -- force read-only
 +0x0000007f0080-0x000001000000 : "backupfs"
 +0x000000030000-0x0000007f0000 : "image1"
 +0x0000007f0000-0x000000fb0000 : "image2"
 +0x000000fb0000-0x000000fd0000 : "config_bak"
 +0x000000fe0000-0x000000ff0000 : "cert"
 +0x000000ff0000-0x000001000000 : "temp"
 +Mirror/redirect action on
 +u32 classifier
 +    Actions configured 
 +Netfilter messages via NETLINK v0.30.
 +nf_conntrack version 0.5.0 (512 buckets, 4096 max)
 +CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
 +nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
 +sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
 +ctnetlink v0.93: registering with nfnetlink.
 +nf_conntrack_ipsec loaded
 +NF_TPROXY: Transparent proxy support initialized, version 4.1.0
 +NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
 +xt_time: kernel timezone is -0000
 +nf_nat_rtsp v0.6.21 loading
 +ip_tables: (C) 2000-2006 Netfilter Core Team
 +TCP cubic registered
 +Realtek SD2-FastPath v1.00beta_2.4.26-uc0
 +/proc/FastPath created
 +/proc/FastPath_heavy_traffic_thres created
 +Realtek MCast FastPath
 +/proc/mc_FastPath created
 +NET: Registered protocol family 10
 +lo: Disabled Privacy Extensions
 +ip6_tables: (C) 2000-2006 Netfilter Core Team
 +Realtek SD5-FastPath Realtek Ipv6FastPath-betaV0.01
 +/proc/Ip6FastPath created
 +Realtek IPv6 MCast FastPath
 +/proc/ip6mc_FastPath created
 +IPv6 over IPv4 tunneling driver
 +sit0: Disabled Privacy Extensions
 +ip6tnl0: Disabled Privacy Extensions
 +NET: Registered protocol family 17
 +br_initMldSnooping-1206:: mldSnoopEnabled:0
 +Bridge firewalling registered
 +br_init-1432: init multicast snooping igmpInitFlag:0
 +Ebtables v2.0 registered
 +ATM OAM F5 initialized.
 +ATM OAM F4 initialized.
 +Enable 8671G 1 function
 +Enable 8671 0 function
 +Enable 8672 function 
 +ratm: RTL8670 SAR v0.0.2 (Jun 17, 2003)
 +/proc/AUTO_PVC_SEARCH created
 +VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
 +Freeing unused kernel memory: 124k freed
 +CS_BANK ok! (minsize=6699, varsize=17572)
 +HS_BANK ok! (minsize=357, varsize=0)
 +login: set_msgqueue_max_size:227> set msgqidds.msg_qbytes=24720 OK
 +set_msgqueue_max_size:227> set msgqidds.msg_qbytes=24720 OK
 +MIB chain descriptors checking (total 43) ok !
 +Check system parameters
 +Update system parameters
 +..PVC Number = 2. Set Desc number per VC = 96
 +========== Initiating Starting Script =============
 +sh: can't open /var/config/start_script
 +========== End Initiating Starting Script =============
 +set_msgqueue_max_size:227> set msgqidds.msg_qbytes=24720 OK
 +error cmd
 +device wlan0-vap0 entered promiscuous mode
 +device eth0.2 entered promiscuous mode
 +device eth0.3 entered promiscuous mode
 +device eth0.4 entered promiscuous mode
 +device eth0.5 entered promiscuous mode
 +cp -f /var/tmp_radvd.conf /var/radvd.conf
 +echo 0 > /proc/sys/net/ipv6/conf/br0/disable_nud
 +echo 1 > /proc/sys/net/ipv6/conf/br0/disable_rs
 +Monitord is running ...
 +Monitord: Reset button event
 +fixme atm_find_ci in sar_open!
 +ratm(itf 0): open 0.16
 +echo '279' > /proc/monitordPid
 +sh: can't create /proc/monitordPid: nonexistent directory
 +[Debug] mssvaluestring:1452:1536
 +[Debug] buffer:1452
 +/var/config/mini_httpd.pem exist!
 +/bin/ip6tables -A INPUT -p icmpv6 --icmpv6-type 130 -j ACCEPT
 +/bin/ip6tables -A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
 +/bin/ip6tables -A FORWARD -d FF00::0/8 -j ACCEPT
 +startup:debug:startConnection:5925:Enter
 +item=1
 +fixme atm_find_ci in sar_open!
 +ratm(itf 0): open 0.35
 +SarRecalPerVCNumber(3408): cnt=0, off=1
 +create: ch0 (0/35) 6000,0
 +sar_close
 +ATM OAM F5 initialized.
 +ATM OAM F4 initialized.
 +Enable 8671G 1 function
 +Enable 8671 0 function
 +Enable 8672 function 
 +create: ch0 (0/35) 6000,0
 +applying workaround...done
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 65534 
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 65534 
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 65534 
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 65534 
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 65534 
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 65534 
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 65534 
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 0 
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 0 
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 0 
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc0 fgroup 0 
 +WAN MAC for vc0 [480033c30e8e]
 +ADDRCONF(NETDEV_UP): vc0: link is not ready
 +PPPoE
 +pEntry->unnumberMode:0
 +PPP Connection (Continuous)...
 +data: spppctl add 0 pppoe vc0 username xxxxxxxxxx@oivelox password xxxxxxxxxx gw 1 mru 1492 ippt 0 debug 0 ipt 0
 +ARP proxy is Disable
 +add_ppp, unit = 0.
 +create unit 0
 +data: spppctl katimer 10
 +echo 0 > /proc/sys/net/ipv6/conf/ppp0/disable_nud
 +echo 0 > /proc/sys/net/ipv6/conf/ppp0/disable_rs
 +startup:debug:startConnection:5925:Enter
 +item=1
 +fixme atm_find_ci in sar_open!
 +ratm(itf 0): open 0.42
 +SarRecalPerVCNumber(3408): cnt=1, off=1
 +create: ch1 (0/42) 6000,0
 +sar_close
 +sar_close
 +ATM OAM F5 initialized.
 +ATM OAM F4 initialized.
 +Enable 8671G 1 function
 +Enable 8671 0 function
 +Enable 8672 function 
 +create: ch0 (0/35) 6000,0
 +create: ch1 (0/42) 6000,0
 +applying workaround...done
 +<subr_pmap.c 2019 setup_vc_pmap_lanmember> mpoactl set vc1 fgroup 65534 
 +WAN MAC for vc1 [480033c30e8f]
 +ADDRCONF(NETDEV_UP): vc1: link is not ready
 +PPPoE
 +pEntry->unnumberMode:0
 +PPP Connection (Manual)...
 +data: spppctl new 1 pppoe vc1 username xxxxxxxxxx@oiwififon password xxxxxxxxxx gw 0 mru 1492 ippt 0 debug 0 ipt 2 disctime 30
 +ARP proxy is Disable
 +echo 0 > /proc/sys/net/ipv6/conf/ppp1/disable_nud
 +echo 0 > /proc/sys/net/ipv6/conf/ppp1/disable_rs
 +start rip!
 +/bin/ip6tables -F FW_GENERAL_INPUT_Technicolor
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor -i lo -j ACCEPT
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor -i br+ -j ACCEPT
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor -p udp --dport 520 -j ACCEPT
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor ! -i br+ -p icmpv6 --icmpv6-type neighbor-solicitation -j ACCEPT
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor ! -i br+ -p icmpv6 --icmpv6-type neighbor-advertisement -j ACCEPT
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor ! -i br+ -p icmpv6 --icmpv6-type router-solicitation -j ACCEPT
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor ! -i br+ -p icmpv6 --icmpv6-type router-advertisement -j ACCEPT
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor ! -i br+ -p icmpv6 --icmpv6-type redirect -j ACCEPT
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor ! -i br+ -p tcp --dport 546 -j ACCEPT
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor ! -i br+ -p udp --dport 546 -j ACCEPT
 +/bin/ip6tables -A FW_GENERAL_INPUT_Technicolor ! -i br+ -p udp --dport 547 -j ACCEPT
 +/bin/iptables -F FW_GENERAL_FORWARD_Technicolor
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +iptables -A FW_GENERAL_FORWARD_Technicolor! -i br+! -o br+ -j RETURN
 +Warning: weird character in interface `br+!' (No aliases, :, ! or *).
 +iptables v1.4.3: chain name `FW_GENERAL_FORWARD_Technicolor!' too long (must be under 30 chars)
 +Try `iptables -h' or 'iptables --help' for more information.
 +/bin/ip6tables -F FW_GENERAL_FORWARD_Technicolor
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +/bin/iptables -F DEFAULT_INPUT_Technicolor
 +/bin/iptables -F DEFAULT_FORWARD_Technicolor
 +/bin/iptables -F DEFAULT_OUTPUT_Technicolor
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +/bin/iptables -A DEFAULT_INPUT_Technicolor -m state --state ESTABLISHED,RELATED -j ACCEPT
 +/bin/iptables -A DEFAULT_FORWARD_Technicolor ! -i br+ -m state --state ESTABLISHED,RELATED -j ACCEPT
 +/bin/ip6tables -F DEFAULT_INPUT_Technicolor
 +/bin/ip6tables -F DEFAULT_FORWARD_Technicolor
 +/bin/ip6tables -F DEFAULT_OUTPUT_Technicolor
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +/bin/ip6tables -A DEFAULT_INPUT_Technicolor -m state --state ESTABLISHED,RELATED -j ACCEPT
 +/bin/ip6tables -A DEFAULT_FORWARD_Technicolor ! -i br+ -m state --state ESTABLISHED,RELATED -j ACCEPT
 +ip6tables -A REMOTEMGMT_Technicolor ! -i br+ -p tcp --dport 23 -j DROP
 +ip6tables -A REMOTEMGMT_Technicolor ! -i br+ -p udp --dport 23 -j DROP
 +ip6tables -A REMOTEMGMT_Technicolor ! -i br+ -p tcp --dport 80 -j DROP
 +ip6tables -A REMOTEMGMT_Technicolor ! -i br+ -p tcp --dport 443 -j DROP
 +ip6tables -A REMOTEMGMT_Technicolor ! -i br+ -p udp --dport 22 -j DROP
 +ip6tables -A REMOTEMGMT_Technicolor ! -i br+ -p tcp --dport 22 -j DROP
 +/bin/iptables -F IP_FILTER_INPUT_Technicolor
 +/bin/iptables -F IP_FILTER_FORWARD_Technicolor
 +/bin/iptables -F IP_FILTER_OUTPUT_Technicolor
 +/bin/ip6tables -F IP_FILTER_INPUT_Technicolor
 +/bin/ip6tables -F IP_FILTER_FORWARD_Technicolor
 +/bin/ip6tables -F IP_FILTER_OUTPUT_Technicolor
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +startup:debug:doDoSProtect:12136:Setting synflood rules...
 +startup:debug:doDoSProtect:12143:Setting ip spoofing rules...
 +startup:debug:doDoSProtect:12150:Setting land attack rules...
 +startup:debug:doDoSProtect:12157:Setting land attack rules...
 +startup:debug:doDoSProtect:12183:Setting port scan rules...
 +startup:debug:doDoSProtect:12190:Setting furtive port scan rules...
 +startup:debug:doDoSProtect:12197:Setting ping broadcast rules...
 +startup:debug:doDoSProtect:12208:Setting icmp redirect attack rules...
 +startup:debug:doDoSProtect:12221:Setting ping of death rules...
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +startup:debug:getGeneralFirewallStatus:44895:MIB_FW_GENERAL_ENABLE:1
 +startup:debug:doDoSProtect:12136:Setting synflood rules...
 +startup:debug:doDoSProtect:12143:Setting ip spoofing rules...
 +startup:debug:doDoSProtect:12150:Setting land attack rules...
 +ifconfig ppp0 > /tmp/ifcfg_ppp0
 +startup:debug:getIpv6addr:11834:allipv6addr is ::
 +ifconfig ppp1 > /tmp/ifcfg_ppp1
 +startup:debug:getIpv6addr:11834:allipv6addr is ::
 +ifconfig vc2 > /tmp/ifcfg_vc2
 +ifconfig: vc2: error fetching interface information: Device not found
 +startup:debug:getIpv6addr:11834:allipv6addr is ::
 +ifconfig vc3 > /tmp/ifcfg_vc3
 +ifconfig: vc3: error fetching interface information: Device not found
 +startup:debug:getIpv6addr:11834:allipv6addr is ::
 +ifconfig vc4 > /tmp/ifcfg_vc4
 +ifconfig: vc4: error fetching interface information: Device not found
 +startup:debug:getIpv6addr:11834:allipv6addr is ::
 +ifconfig vc5 > /tmp/ifcfg_vc5
 +ifconfig: vc5: error fetching interface information: Device not found
 +startup:debug:getIpv6addr:11834:allipv6addr is ::
 +ifconfig vc6 > /tmp/ifcfg_vc6
 +ifconfig: vc6: error fetching interface information: Device not found
 +startup:debug:getIpv6addr:11834:allipv6addr is ::
 +ifconfig vc7 > /tmp/ifcfg_vc7
 +ifconfig: vc7: error fetching interface information: Device not found
 +startup:debug:getIpv6addr:11834:allipv6addr is ::
 +startup:debug:doDoSProtect:12157:Setting land attack rules...
 +startup:debug:doDoSProtect:12183:Setting port scan rules...
 +startup:debug:doDoSProtect:12190:Setting furtive port scan rules...
 +startup:debug:doDoSProtect:12197:Setting ping broadcast rules...
 +startup:debug:doDoSProtect:12208:Setting icmp redirect attack rules...
 +startup:debug:doDoSProtect:12221:Setting ping of death rules...
 +/bin/echo 2 > /proc/fastbridge
 +clean rtk fast bridge table
 +*****Enable ftp ALG function!*****
 +*****Restart ftp ALG function with new port!*****
 +*****Enable l2tp ALG function!*****
 +*****Restart l2tp ALG function with new port!*****
 +nf_conntrack_l2tp version 3.1 loaded
 +*****Restart ipsec ALG function with new port!*****
 +*****Enable pptp ALG function!*****
 +*****Restart pptp ALG function with new port!*****
 +cp -f /var/tmp_radvd.conf /var/radvd.conf
 +startup:debug:addStaticRouteForDNS:31269:mode:1
 +startup:debug:createManualDNSResolveFile:31224:Enter
 +startup:debug:addStaticRouteForDNS:31362:Exit
 +upnpctrl(up): Start MINIUPNPD on ppp0 interface
 +cfg_getVersion: invoke getVersion()
 +Dec 31 21:00:35 miniupnpd[928]: HTTP listening on port 49152
 +ADDRCONF(NETDEV_UP): eth0.2: link is not ready
 +ADDRCONF(NETDEV_UP): eth0.3: link is not ready
 +ADDRCONF(NETDEV_UP): eth0.4: link is not ready
 +ADDRCONF(NETDEV_UP): eth0.5: link is not ready
 +/bin/slogd -n -s 16384 -l 6 ...
 +Current Mode: xDSL
 +Interface doesn't accept private ioctl...
 +89F1: Operation not permitted
 +CMD ARGS:  -start -c /var/wscd.conf -w wlan0 -fi /var/wscd-wlan0.fifo 
 +Writing file /var/wscd.conf...
 +
 +WiFi Simple Config v1.22 (2016.11.25-07:28+0000).
 +
 +Total WPA/WPA2 number is 1
 +iwcontrol RegisterPID to (wlan0)
 +iptables: No chain/target/match by that name. Run `dmesg' for more information.
 +iptables v1.4.3: Couldn't find target `lan_mark'
 +
 +Try `iptables -h' or 'iptables --help' for more information.
 +udhcp server/relay (v0.9.9-pre) started
 +Run Server and Relay functions.
 +dhcpd server read configfile:poolname=default
 +dhcpd server read configfile:poolname=STBs
 +dhcpd server read configfile:poolname=FON
 +/bin/echo 0 > /proc/rtl865x/portisolation
 +Illegal target name 'portmapping'.
 +Listening on Socket/fon0
 +Sending on   Socket/fon0
 +Listening on Socket/br0
 +Sending on   Socket/br0
 +RTNETLINK answers: No such file or directory
 +RTNETLINK answers: No such file or directory
 +RTNETLINK answers: No such file or directory
 +RTNETLINK answers: No such file or directory
 +
 +cwmp_flag=30
 +<main.c>Set No Debug Message!
 +RTNETLINK answers: No such file or directory
 +RTNETLINK answers: No such file or directory
 +RTNETLINK answers: No such file or directory
 +RTNETLINK answers: No such file or directory
 +RTNETLINK answers: No such file or directory
 +Error: argument "" is wrong: fwmark value is invalid
 +
 +<cwmp_utility.c>Set No Debug Message[1]
 +<main.c>Set Delay!
 +<cwmp_utility.c>Set Delay[15]
 +<cwmp_utility.c>Set gNotifyBringAllWanIPinInform[1]
 +<cwmp_utility.c>Set gConReqAuthType[0]
 +<cwmp_utility.c>Set gReturn503[0]
 +
 +enter cwmp_main!
 +Start cwmp_main() !
 +Error: argument " " is wrong: fwmark value is invalid
 +
 +Error: argument "-p ICMP" is wrong: fwmark value is invalid
 +
 +Error: argument "-p TCP" is wrong: fwmark value is invalid
 +
 +<subr_pmap.c 1806 set_policyrt> the itfGroup is 0x0. ifIndex is 0x0. ifname is ppp0
 +<subr_pmap.c 1806 set_policyrt> the itfGroup is 0x0. ifIndex is 0x101. ifname is ppp1
 +Init System OK for IPV6
 +startup:debug:startDnsRelay:24149:defIfIndex:0
 +  INFO: get DNS from PPP
 +startup:debug:startDnsRelay:24195:get DNS from PPP, Entry.ifIndex:0
 +cat /dev/null >  /var/resolv.dnsmasq.conf
 +startup:debug:GenerateDnsmasqFile:43354:Write to dnsmasq.conf Start.
 +cat /dev/null > /var/dnsmasq.conf
 +startup:debug:GenerateDnsmasqFile:43647:Write to dnsmasq.conf Exit.
 +startup:debug:startDnsRelay:24379:Mapping DNS file:/etc/ppp/resolv_0.conf
 +cat /var/resolv.v4.conf >> /var/resolv.dnsmasq.conf
 +cat: can't open '/var/resolv.v4.conf': No such file or directory
 +cat /var/resolv.v6.conf >> /var/resolv.dnsmasq.conf
 +cat: can't open '/var/resolv.v6.conf': No such file or directory
 +startup:debug:startDnsRelay:24405:Exit.
 +========== Initiating Ending Script =============
 +sh: can't open /var/config/end_script
 +========== End Initiating Ending Script =============
 +[1]:/bin/fon
 +[2]:startUp
 +
 +udhcp server/relay (v0.9.9-pre) started
 +Run Server and Relay functions.
 +dhcpd server read configfile:poolname=default
 +dhcpd server read configfile:poolname=STBs
 +dhcpd server read configfile:poolname=FON
 +Listening on Socket/fon0
 +Sending on   Socket/fon0
 +Listening on Socket/br0
 +Sending on   Socket/br0
 +cat /dev/null >  /var/resolv.dnsmasq.conf
 +cat /dev/null > /var/dnsmasq.conf
 +cat /var/resolv.v4.conf >> /var/resolv.dnsmasq.conf
 +cat: can't open '/var/resolv.v4.conf': No such file or directory
 +cat /var/resolv.v6.conf >> /var/resolv.dnsmasq.conf
 +cat: can't open '/var/resolv.v6.conf': No such file or directory
 +/var/config/mini_httpd.pem exist!
 +[Debug] <checkWAN:187> 
 +[Debug] <checkWAN:206> ifName:ppp0
 +DHCP Server ready, start to monitor is all bridges Pvcs
 </code> </code>
 +
 +==== Extras ====
 +
 +=== Bootloader ===
 +<code>
 +...
 +Press 'ESC' to stop autoboot:
 +
 +DSL-100HNU-K1 v2>hello
 +hello: command not found
 +
 +Supported commands:
 +atbr restore to default configuration
 + usage: atbr
 +atbt enable/disable first block writable
 + usage: atbt x (x=1:enable, others:disable)
 +aten set debug flag
 + usage: aten x y (x:[1|0], y:password)
 +atgo run kernel image
 + usage: atgo
 +athe help
 + usage: athe [cmd]
 +atlc upload current/romd config file via xmodem
 + usage: atlc file_type (file_type:[config|romd])
 +atmt reduce manufacture bootup time for wireless calibration
 + usage: atmt x (x=1:enable, others:disable)
 +atse show the seed of password generator
 + usage: atse
 +atsh dump manufacturer related data
 + usage: atsh
 +atsn write series number to flash
 + usage: atsn sn (sn:ASCII serial number with 14 bytes length)
 +atub xmodem upload bootloader to flash
 + usage: atub
 +atur xmodem upload firmware to flash
 + usage: atur
 +atwz write MAC addr, country code, debug flag, MAC quantity to flash
 + usage: atwz mac [cc df mq]
 +atfn show/write FON number
 + usage: atfn [sn] (sn:ASCII serial number with 64 bytes length)
 +atsr reboot device
 + usage: atsr
 +attp tftp upload
 + usage: attp c_ip s_ip file_name file_type (file_type:[boot|ras|config|romd|cert])
 +atcr clear romd config
 + usage: atcr
 +atdm dump memory
 + usage: atdm addr size
 +atle leds test
 + usage: atle [on|off]
 +atht upload firmware via http
 + usage: atht
 +
 +OK
 +DSL-100HNU-K1 v2>
 +</code>
 +
 +<code>
 +DSL-100HNU-K1 v2>atsh
 +FW Version              : V1.00(WQQ.0)b13
 +FW Ext. Version         : VOI_Fw_v6
 +Bootbase Version        : V1.19 | 11/23/2015 15:44:01
 +Vender Name             : MitraStar Technology, Inc.
 +Product Name            : DSL-100HNU-K1 v2
 +Serial Number           : xxxxxxxxxxxxx
 +First MAC Address       : xxxxxxxxxxxxx
 +Last MAC Address        : xxxxxxxxxxxxx
 +MAC Address Quantity    : 02
 +Default Country Code    : D0
 +Boot Module Debug Flag  : 00
 +RootFS Checksum         : 80BBE8B8
 +Kernel Checksum         : C4807C51
 +RomFile Checksum        : A7553DAB
 +Feature Bits            :
 +                    4D 53 20 02 20 02 00 00-00 00 00 00 00 00 00 00
 +                    00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00
 +OK
 +</code>
 +
 +=== Misc ===
 +
 +<code>
 +# cat /proc/cpuinfo 
 +system type : RTL8672
 +processor : 0
 +cpu model : 56321
 +BogoMIPS : 448.92
 +tlb_entries : 64
 +mips16 implemented : yes
 +</code>
 +
 +<code>
 +# cat /proc/version 
 +Linux version 2.6.30.9-svn10809 (jimchen@sw15-server) (gcc version 4.4.7 (Realtek RSDK-1.5.8p1 Build 1050) ) #278 Fri Nov 25 15:20:38 CST 2016
 +</code>
 +
 +<code>
 +# cat /proc/mounts 
 +rootfs / rootfs rw 0 0
 +/dev/root / squashfs ro,relatime 0 0
 +proc /proc proc rw,relatime 0 0
 +ramfs /var ramfs rw,relatime 0 0
 +sysfs /sys sysfs rw,relatime 0 0
 +mdev /dev tmpfs rw,relatime 0 0
 +</code>
 +
 +<code>
 +# cat /proc/cmdline 
 +console=ttyS0,115200 mem=32M root=31:3 ro
 +</code>
 +
 +<code>
 +# cat /proc/mtd 
 +dev:    size   erasesize  name
 +mtd0: 00010000 00001000 "boot"
 +mtd1: 00010000 00001000 "config_hw"
 +mtd2: 00010000 00001000 "config_cur"
 +mtd3: 0052fc0d 00001000 "rootfs"
 +mtd4: 0080ff80 00001000 "backupfs"
 +mtd5: 007c0000 00001000 "image1"
 +mtd6: 007c0000 00001000 "image2"
 +mtd7: 00020000 00001000 "config_bak"
 +mtd8: 00010000 00001000 "cert"
 +mtd9: 00010000 00001000 "temp"
 +</code>
 +
 +<code>
 +# ps
 +  PID USER       VSZ STAT COMMAND
 +    1 tech       776 S    /sbin/init 
 +    2 tech         0 SW<  [kthreadd]
 +    3 tech         0 SWN  [ksoftirqd/0]
 +    4 tech         0 SW<  [watchdog/0]
 +    5 tech         0 SW<  [events/0]
 +    6 tech         0 SW<  [khelper]
 +    9 tech         0 SW<  [async/mgr]
 +   68 tech         0 SW<  [kblockd/0]
 +   86 tech         0 SW   [netlog]
 +   91 tech         0 SW   [khungtaskd]
 +   92 tech         0 SW   [pdflush]
 +   93 tech         0 SW   [pdflush]
 +   94 tech         0 SW<  [kswapd0]
 +   96 tech         0 SW<  [crypto/0]
 +  133 tech         0 SW<  [kNicEvt]
 +  135 tech         0 SW<  [mtdblockd]
 +  199 tech      1852 S    configd 
 +  201 tech       636 S    /bin/inetd 
 +  202 tech      1928 S    /bin/config -c -u tech 
 +  213 tech      1472 S    /bin/proxyapid 
 +  261 tech       728 S    /bin/radvd -C /var/radvd.conf 
 +  262 tech       780 S    /bin/mpoad 
 +  263 tech      1848 S    /bin/spppd 
 +  270 tech      1060 S    /bin/sntp -t 1 -i 3600 -s a.ntp.br b.ntp.br 
 +  273 tech       992 S    /bin/snmpd -p 161 -c ADSL -th 0.0.0.0 -te 1.3.6.1.4.1
 +  281 tech      1460 S    /bin/setupPortFWd 
 +  282 tech      1488 S    /bin/monitord 
 +  283 tech      1480 S    /bin/monitord 
 +  312 tech      3476 S    /bin/mini_httpd -p 80 -C /etc_ro/mini_httpd.conf 
 +  961 tech      1036 S    /bin/miniupnpd -i ppp0 -a 192.168.1.1 -p 49152 
 +  972 tech       636 S    /bin/slogd -n -s 16384 -l 6 -L 
 +  976 tech      1708 D    startup 
 +  977 tech      1708 D    startup 
 + 1142 tech      1208 S    /bin/wscd -start -c /var/wscd.conf -w wlan0 -fi /var/
 + 1150 tech       648 S    /bin/iwcontrol wlan0 
 + 1151 tech       664 S    /bin/mini_upnpd -wsc /tmp/wscd_config -igd /tmp/igd_c
 + 1155 tech      6448 S    /bin/cwmpClient 
 + 1214 tech       820 S    /bin/udhcpd -B /var/udhcpd/udhcpd.conf 
 + 1225 tech       760 S    /bin/dnsmasq 
 + 1226 tech      1472 S    /bin/fon startUp 
 + 1229 tech      6448 S    /bin/cwmpClient 
 + 1230 tech      6448 S    /bin/cwmpClient 
 + 1242 tech       868 S    /bin/sh 
 + 1311 tech       860 R    ps
 +</code>
 +
 +===== Firmware =====
 +
 +Aos que quiserem dar uma olhada no conteúdo do firmware, aqui estão o bootloader e o rootfs da versão "OI_Fw_v6": [[https://www.tripleoxygen.net/files/devices/technicolor/td5137/firmware/]]
  
 == Agradecimentos == == Agradecimentos ==
  
 Pessoas envolvidas em discussões, dicas ou bate papo em geral. Lista em ordem alfabética. Pessoas envolvidas em discussões, dicas ou bate papo em geral. Lista em ordem alfabética.
modem/td5137.1497312814.txt.gz · Última modificação: (edição externa)