Diferenças

Aqui você vê as diferenças entre duas revisões dessa página.

--- modem:rtv9015vw [2020/07/22 21:44] – [Hardware] facsi
+++ modem:rtv9015vw [2022/11/07 08:31] (atual) – edição externa 127.0.0.1
@@ Linha 1: / Linha 1: @@
-====== Askey RTV9015VW - Working on ======
+====== Askey RTV9015VW ======
 {{description>Informações sobre o Askey RTV9015VW / router / gateway. Teardown, hacking, unlocking (desbloqueio), firmwares, custom images, recuperação, bridge.}}
@@ Linha 17: / Linha 17: @@
 Clique na foto para abrir o álbum.
-[[{{:modem:img_20200722_211902.jpg?400}} |{{ https://www.tripleoxygen.net/files/devices/askey/rtf3505vw-gv/rtf3505vw-gv_small.jpg }}]]
+{{ :modem:img_20200722_211902.jpg?600 | http://}}
 ^ SoC | Realtek RTL8685SF - BootLoader RTL867X |
-^ Flash | WinBond - Spansion 1 Gbit (4 MB) NAND |
+^ Flash | MX25L6406E (8 MB) |
 ^ Switch | Integrado |
 ^ USB | Não |
@@ Linha 29: / Linha 29: @@
 ^ Serial | Sim |
 ^ JTAG | ? |
+===== Introduction =====
+This is a Askey branded VDSL modem used for some brazilian telecom and also for Movistar. \\
+It is known for better long line compatibility.
+There are 2 versions of this modem available, although internally they are the same. There is a small version and a sightly bigger version. \\
+For the brazilian version:
+There is a known flaw in the first firmware release where the user could access the wifi by trying the default wifi password. The password was just the wifi MAC Address which could be checked using any wifi scan tool.
+The recently updated firmware fixed that issue, however, it also removed the Saveconf.htm page which allowed the user to change the modem advanced settings. Fortunately, this can be bypassed, but the user must know some html tricks.
 ===== Bootlog =====
@@ Linha 36: / Linha 48: @@
   * "Live" Firmware new updated version without Saveconf.htm, DDNS.htm pages.
+  * Looking forward to get the movistar firwmare
+===== Configuration =====
+This modem allows the user to do some system configuration. The default GUI is mostly disabled so user cannot change settings such as the VOIP settings.
+For the old firmware, to enable the firmware advanced settings do the following:
+Open the web browser and access http://192.168.15.1/padrao
+User: support \\
+Pass: Check the label in the modem: password is the same as admin's password
+Open a new tab to access
+http://192.168.15.1/saveconf.htm
+Save the "config.img" config file. Use Notepad application to edit it.
+Change the following lines
+from: \\
+<V N="ENABLE_ADVANCE_PAGE" V="0x0"/>   \\
+<V N="PADRAO_WIFI_ONLY" V="0x1"/>   \\
+to: \\
+<V N="ENABLE_ADVANCE_PAGE" V="0x1"/>  \\
+<V N="PADRAO_WIFI_ONLY" V="0x0"/>  \\
+Save the file and upload it on http://192.168.15.1/saveconf.htm
+Reboot the modem.
+*adapted from Claudio_Jacobsen explanation
 == Agradecimentos ==
 Pessoas envolvidas em discussões, dicas ou bate papo em geral. Lista em ordem alfabética.