====== Nokia G-140W-H ====== {{description>Informações sobre o Alcatel-Lucent Nokia G-140W-H Oi ONT/ONU. Teardown, hacking, unlocking (desbloqueio), firmwares, custom images, recuperação, bridge.}} Este modelo é fornecido pela Oi Fibra. ===== Disclaimer ===== A maioria destes dispositivos são fornecidos pelo seu ISP em regime de comodato como parte do serviço fornecido. Todas as informações divulgadas aqui são de caráter informativo e pesquisa, sendo de sua inteira responsabilidade quaisquer implicações, perdas ou danos ao utilizá-las. Todas as informações, métodos, procedimentos, firmwares, aplicativos e material sobre modificações e configurações postadas neste wiki foram criados pelo O3 Labs (salvo menção em contrário) e disponibilizadas **GRATUITAMENTE** desde o dia de sua elaboração. Denuncie quando possível quaisquer tentativas de venda destes material. ===== Hardware ===== {{ :ont:wdsc_0282.jpg?direct&400 |}} {{ :ont:wdsc_0306.jpg?direct&400 |}} **[[https://photos.app.goo.gl/vS1BfsymCcLUFh3bA|Álbum com todas as fotos.]]** ^ SoC | Broadcom BCM68461KRFBG - ARM Cortex A7 Dual Core @ 1000MHz | ^ RAM | Micron MT41K256M16TW-107 - 4Gbit (512 MB) DDR3L-1866 @ 800 MHz | ^ Flash | Micron 29F2G08ABAGA - 2 Gbit (256 MB) SLC NAND | ^ Switch | Integrado | ^ USB | 2 x 2.0 | ^ Wireless 2.4 GHz| Broadcom BCM43217 2x2 802.11b/g/n| ^ Wireless 5 GHz| Broadcom BCM4352KMLG 3x3 802.11ac | ^ GPON Transceiver | GN25L98 BOSA | ^ FXS | 1 ( Intel/Lantiq PEF32001 SLIC ) | ^ HPNA | Não | ^ Serial | Sim | ^ JTAG | Não | ===== Bootlog ===== ++++ Visualizar| ---- BTRM V1.1 MEMP CACH CODE ZBSS MAIN OTP? OTPP USBT NAND IMG? IMGL UHD? UHDP RLO? RLOP UBI? UBIP PASS ---- HELO CPU0 L1CD MMUI ZBBS MAIN 5.0204patch2xponChina5-1.0.38-162.106 Boot Strap Register: 0x12000056 Status wait timeout: nandsts=0x30000000 mask=0x40000000, count=0 NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes NVRAM memcfg 0x427 MCB chksum 0x8fa11458, config 0x427 MemsysInit lpf0fc_generic 3.3.7.0 20180604 DDR3 82620304 80180000 801A0000 00000000 00000000 00204E9A MCB rev=0x00060301 Ref ID=0x04E9A Sub Bld=0x002 Dram Timing 11-11-11 start of memsys_begin mc_cfg_init(): Initialize the default values on mc_cfg init_memc_dram_profile(): Initializing MEMC DRAM profile --------------------------------------------------------------- MEMC DRAM profile (memc_dram_profile_struct) values: ==================================================== PART values: part_speed_grade = 6 part_size_Mbits = 4096 (DRAM size in MegaBits) part_row_bits = 15 (number of row bits) part_col_bits = 10 (number of column bits) part_ba_bits = 3 (number of bank bits) part_width_bits = 16 (DRAM width in bits) NUMER OF PARTS: part_num = 1 (Number of parts) TOTAL values: total_size_Mbits = 4096 (DRAM size in MegaBits) total_cs_bits = 0 (number of cs bits, for dual_rank mode) total_width_bits = 16 (DRAM width in bits) total_burst_bytes = 16 (Number of bytes per DRAM access) total_max_byte_addr = 0x1fffffff (Maximum/last DRAM byte address) (Number of bits in total_max_byte_addr is 29) (i.e. total_max_byte_addr goes from bit 0 to bit 28) ddr_2T_mode = 1 ddr_hdp_mode = 0 large_page = 1 ddr_dual_rank = 0 cs_mode = 0 MEMC timing (memc_dram_timing_cfg_struct) values: ==================================================== MC_CHN_TIM_TIM1_0 register fields: tCwl = 8 tRP = 11 tCL = 11 tRCD = 11 MC_CHN_TIM_TIM1_1 register fields: tCCD_L = 4 tCCD = 4 tRRD_L = 6 tRRD = 6 MC_CHN_TIM_TIM1_2 register fields: tFAW = 32 tRTP = 6 tRCr = 39 MC_CHN_TIM_TIM1_3 register fields: tWTR_L = 6 tWTR = 6 tWR_L = 12 tWR = 12 MC_CHN_TIM_TIM2 register fields: tR2R = 0 tR2W = 2 tW2R = 2 tW2W = 0 tAL = 0 tRFC = 208 Poll PHY Status register PHY Status= 1 Disable Auto-Refresh refresh_ctrl_cfg writing to refresh control register (dram_clk_freq_MHz=800 ; ref_rate=0xb6 ; ref_disable=1) [0x8018020c] = 0x8000b600 [0x80180200] = 0x00000305 End of memsys_begin Add/Ctl Alignment Coarse Adj=0x0B4 deg, cmd steps=0x072 reg 0x801A0080 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A0084 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A0088 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A008C set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A0090 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A0094 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A0098 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A009C set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00A0 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00A4 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00A8 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00AC set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00B0 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00B4 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00B8 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00BC set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00C0 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00C4 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00C8 set to VDL 0x039 with Fine Adj=0x01 deg reg 0x801A00EC set to VDL 0x039 with Fine Adj=0x01 deg ZQ Cal LP PHY R in Ohm P: Finger=0x2D0 Term=0x78 Drv=0x41 N: Finger=0x2D0 Term=0x78 Drv=0x41 PLL Ref(Hz)=0x02FAF080 UI STEPS=0x039 DDR CLK(MHz)=0x31B WL CLK dly(ps)=0x0C8 bitT(ps)=0x274 VDLsize(fs)=0x2B09 CLK_VDL=0x01A start of memc_init [0x80180004] = 0x0110061f [0x80180234] = 0x00000501 Enable Auto-Refresh refresh_ctrl_cfg writing to refresh control register (dram_clk_freq_MHz=800 ; ref_rate=0xb6 ; ref_disable=0) [0x8018020c] = 0x0000b600 [0x80180110] = 0x11100f0e [0x80180114] = 0x15141312 [0x80180118] = 0x19181716 [0x8018011c] = 0x001c1b1a [0x80180124] = 0x04000000 [0x80180128] = 0x08070605 [0x8018012c] = 0x00000a09 [0x80180134] = 0x000d0c0b Writing to MC_CHN_CFG_CNFG reg; data=0x00000000 [0x80180100] = 0x00000000 cfg_memc_timing_ctrl() Called [0x80180214] = 0x080b0b0b [0x80180218] = 0x04040606 [0x8018021c] = 0x20000627 [0x80180220] = 0x06060c0c [0x80180224] = 0x120000d0 End of memc_init start of pre_shmoo [0x80180004] = 0xc110071f end of pre_shmoo SHMOO 28nm 801A0000 80180800 00000000 00020000 00000000 Shmoo WL One UI Steps : 0x44 disable_dram_refresh refresh_ctrl_cfg writing to refresh control register (dram_clk_freq_MHz=800 ; ref_rate=0xb6 ; ref_disable=1) [0x8018020c] = 0x8000b600 auto-clk result = 023 (filter=0C steps) initial CLK shift = 01A final CLK shift = 023 disable_dram_refresh refresh_ctrl_cfg writing to refresh control register (dram_clk_freq_MHz=800 ; ref_rate=0xb6 ; ref_disable=1) [0x8018020c] = 0x8000b600 enable_dram_refresh refresh_ctrl_cfg writing to refresh control register (dram_clk_freq_MHz=800 ; ref_rate=0xb6 ; ref_disable=0) [0x8018020c] = 0x0000b600 00000000001111111111222222222233333333334444444444555555555566666666 01234567890123456789012345678901234567890123456789012345678901234567 00 S-----------X------------------------------------------------------- 01 S------------X------------------------------------------------------ Shmoo RD En DQSN DRIVE PAD CONTROL (from) (to) B0 0003196B 0007996B B1 0003196B 0007996B B0 RISE UI=1 VDL=1D PICK UI=2 VDL=1D B1 RISE UI=1 VDL=1F PICK UI=2 VDL=1F 00000000001111111111222222222233333333334444444444555555555566666666 01234567890123456789012345678901234567890123456789012345678901234567 00 --S-----------------------+--X+++++++++++++++----------------------- 01 --S------------------------+-++X+++++++++++++++--------------------- Shmoo RD DQ NP DQS : B0 VDL=39 ok B1 VDL=39 ok 00000000001111111111222222222233333333334444444444555555555566666666 01234567890123456789012345678901234567890123456789012345678901234567 00 -----+++++++++++++++++++++++X+++++++++++++++++++++++---------------- 01 ------------++++++++++++++++++++++++X+++++++++++++++++++++++++------ 02 ----++++++++++++++++++++++++X++++++++++++++++++++++++--------------- 03 --------------+++++++++++++++++++++++X+++++++++++++++++++++++------- 04 -------+++++++++++++++++++++++X+++++++++++++++++++++++-------------- 05 ------------++++++++++++++++++++++++X++++++++++++++++++++++++------- 06 ------++++++++++++++++++++++++X++++++++++++++++++++++++------------- 07 -------+++++++++++++++++++++++X++++++++++++++++++++++++------------- 08 ----------+++++++++++++++++++++++X++++++++++++++++++++++++---------- 09 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++------------- 10 -----------+++++++++++++++++++++++X++++++++++++++++++++++++--------- 11 --+++++++++++++++++++++++X++++++++++++++++++++++++------------------ 12 -----------+++++++++++++++++++++++++X++++++++++++++++++++++++++----- 13 ----++++++++++++++++++++++++X+++++++++++++++++++++++++-------------- 14 ------------++++++++++++++++++++++++X+++++++++++++++++++++++++------ 15 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++------------- Shmoo RD DQ P 00000000001111111111222222222233333333334444444444555555555566666666 01234567890123456789012345678901234567890123456789012345678901234567 00 -----+++++++++++++++++++++++X+++++++++++++++++++++++---------------- 01 ------------++++++++++++++++++++++++X++++++++++++++++++++++++------- 02 -----+++++++++++++++++++++++X++++++++++++++++++++++++--------------- 03 --------------++++++++++++++++++++++X+++++++++++++++++++++++-------- 04 ------+++++++++++++++++++++++X++++++++++++++++++++++++-------------- 05 ------------++++++++++++++++++++++++X++++++++++++++++++++++++------- 06 ------++++++++++++++++++++++++X+++++++++++++++++++++++++------------ 07 -------+++++++++++++++++++++++X++++++++++++++++++++++++------------- 08 ----------++++++++++++++++++++++++X++++++++++++++++++++++++--------- 09 -----++++++++++++++++++++++++X+++++++++++++++++++++++++------------- 10 ----------++++++++++++++++++++++++X+++++++++++++++++++++++++-------- 11 -++++++++++++++++++++++++X++++++++++++++++++++++++------------------ 12 -----------+++++++++++++++++++++++++X++++++++++++++++++++++++++----- 13 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------- 14 ------------+++++++++++++++++++++++++X+++++++++++++++++++++++++----- 15 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++------------- Shmoo RD DQ N 00000000001111111111222222222233333333334444444444555555555566666666 01234567890123456789012345678901234567890123456789012345678901234567 00 -----+++++++++++++++++++++++X++++++++++++++++++++++++--------------- 01 ------------++++++++++++++++++++++++X+++++++++++++++++++++++++------ 02 -----++++++++++++++++++++++++X++++++++++++++++++++++++-------------- 03 -------------+++++++++++++++++++++++X++++++++++++++++++++++++------- 04 -------++++++++++++++++++++++++X++++++++++++++++++++++++------------ 05 ------------+++++++++++++++++++++++++X+++++++++++++++++++++++++----- 06 ------++++++++++++++++++++++++X++++++++++++++++++++++++------------- 07 ------+++++++++++++++++++++++++X++++++++++++++++++++++++++---------- 08 --------+-+++++++++++++++++++++++X++++++++++++++++++++++++---------- 09 ---+++++++++++++++++++++++++X++++++++++++++++++++++++++------------- 10 ----------++++++++++++++++++++++++X++++++++++++++++++++++++--------- 11 +++++++++++++++++++++++++X+++++++++++++++++++++++++----------------- 12 ----------++++++++++++++++++++++++++X++++++++++++++++++++++++++----- 13 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------- 14 ----------+++++++++++++++++++++++++X++++++++++++++++++++++++++------ 15 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------- RD DQS adjustments : BL0: Start: 0x39 Final: 0x39 BL1: Start: 0x39 Final: 0x39 Shmoo WR DQ 00000000001111111111222222222233333333334444444444555555555566666666 01234567890123456789012345678901234567890123456789012345678901234567 00 ----+++++++++++++++++++++++X++++++++++++++++++++++++---------------- 01 --------+++++++++++++++++++++++++X++++++++++++++++++++++++++-------- 02 --+++++++++++++++++++++++++X+++++++++++++++++++++++++--------------- 03 -----------++++++++++++++++++++++++X++++++++++++++++++++++++-------- 04 -----++++++++++++++++++++++++X+++++++++++++++++++++++++------------- 05 -------------+++++++++++++++++++++++X+++++++++++++++++++++++-------- 06 ------+++++++++++++++++++++++++X++++++++++++++++++++++++++---------- 07 ------++++++++++++++++++++++++X+++++++++++++++++++++++++------------ 08 --------++++++++++++++++++++++++X+++++++++++++++++++++++++---------- 09 -----+++++++++++++++++++++++++X+++++++++++++++++++++++++------------ 10 -----------++++++++++++++++++++++++X++++++++++++++++++++++++-------- 11 -++++++++++++++++++++++++X+++++++++++++++++++++++++----------------- 12 ----------+++++++++++++++++++++++++X++++++++++++++++++++++++++------ 13 --++++++++++++++++++++++++X+++++++++++++++++++++++++---------------- 14 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++------- 15 --+++++++++++++++++++++++++X+++++++++++++++++++++++++--------------- Shmoo WR DM WR DM 00000000001111111111222222222233333333334444444444555555555566666666 01234567890123456789012345678901234567890123456789012345678901234567 00 ------+++++++++++++++++++++++++X++++++++++++++++++++++++++---------- 01 ---+++++++++++++++++++++++++X+++++++++++++++++++++++++-------------- start of memsys_end [0x80180004] = 0x8110071f [0x80180010] = 0x00000009 end of memsys_end DDR test done successfully FPS0 ---- PAR1 U998 COM0 UBI# 03E6 BT98 0008 ---- PAR2 U998 COM0 UBI# 03E6 BT98 0328 ---- FAL2 TRY1 NAN3 UBI! NAN5 Base: 5.2_04patch2xponChina5 CFE version 1.0.38-162.106 for BCM96846 (32bit,SP,LE) Build Date: Mar-31-2020--23:07:25 (buildmgr@AONT26) Copyright (C) 2000-2015 Broadcom Corporation. Boot Strap Register: 0x12000056 Chip ID: BCM68461_A1, ARM Cortex A7 Dual Core: 1000MHz RDP: 1000MHz Total Memory: 536870912 bytes (512MB) NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes NAND flash device: Micron MT29F2G08ABA, id 0x2cda block 128KB size 262144KB Take PMC out of reset waiting for PMC finish booting PMC rev: 3.1.6 running Dump Current setting of SWREGs 1.0D, reg=0x00, val=0xc690 1.0D, reg=0x01, val=0x0d06 1.0D, reg=0x02, val=0xcb12 1.0D, reg=0x03, val=0x5171 1.0D, reg=0x04, val=0x0000 1.0D, reg=0x05, val=0x0702 1.0D, reg=0x06, val=0x9400 1.0D, reg=0x07, val=0x0029 1.0D, reg=0x08, val=0x0c02 1.0D, reg=0x09, val=0x0071 1.8 , reg=0x00, val=0xc690 1.8 , reg=0x01, val=0x0d06 1.8 , reg=0x02, val=0xcb12 1.8 , reg=0x03, val=0x5170 1.8 , reg=0x04, val=0x0000 1.8 , reg=0x05, val=0x0702 1.8 , reg=0x06, val=0xb000 1.8 , reg=0x07, val=0x0029 1.8 , reg=0x08, val=0x0c02 1.8 , reg=0x09, val=0x0071 1.5 , reg=0x00, val=0xc690 1.5 , reg=0x01, val=0x0d06 1.5 , reg=0x02, val=0xcb12 1.5 , reg=0x03, val=0x5170 1.5 , reg=0x04, val=0x0000 1.5 , reg=0x05, val=0x0702 1.5 , reg=0x06, val=0xb000 1.5 , reg=0x07, val=0x0029 1.5 , reg=0x08, val=0x0c02 1.5 , reg=0x09, val=0x0071 1.0A, reg=0x00, val=0xc690 1.0A, reg=0x01, val=0x0d06 1.0A, reg=0x02, val=0xcb12 1.0A, reg=0x03, val=0x5170 1.0A, reg=0x04, val=0x0000 1.0A, reg=0x05, val=0x0702 1.0A, reg=0x06, val=0xb000 1.0A, reg=0x07, val=0x0029 1.0A, reg=0x08, val=0x0c02 1.0A, reg=0x09, val=0x0071 pmc_init:PMC using DQM mode BOARD.G140WH PIN MUX Init done Board IP address : 192.168.1.1:ffffff00 Host IP address : 192.168.1.100 Gateway IP address : Run from flash/host/tftp (f/h/c) : f Default host run file name : vmlinux Default host flash file name : bcm963xx_fs_kernel Boot delay (0-9 seconds) : 1 Boot image (0=latest, 1=previous) : 0 Default host ramdisk file name : Default ramdisk store address : Default DTB file name : Board Id : G140WH Number of MAC Addresses (1-64) : 12 Base MAC Address : dc:d9:ae:xx:xx:xx PSI Size (1-128) KBytes : 128 Enable Backup PSI [0|1] : 0 System Log Size (0-256) KBytes : 64 Auxillary File System Size Percent: 0 GPON Serial Number : "3FE480XXXXXX" GPON Password : " " Operator Id : "BRZL" RNR_TBLS memory allocation (MB) : 4 FPM_POOL memory allocation (MB) : 16 DHD 0 memory allocation (MB) : 0 DHD 1 memory allocation (MB) : 0 DHD 2 memory allocation (MB) : 0 WLan Feature : 0x00 Voice Board Configuration (0-33) : LE9652_ZSI_IB Partition 1 Size (MB) : Partition 2 Size (MB) : Partition 3 Size (MB) : Partition 4 Size (MB) (Data) : 4MB *** Press any key to stop auto run (1 seconds) *** Auto run second count down: 110 Booting kernel from image (0x00100000) ... ubi_find_file: got vmlinux.lz size 2290479 Decompression LZMA Image OK! Entry at 0x00018000 Starting program at 0x00018000 L04 -> rootfs:2 rfs_part:2 bstart:0xfcbaac bcnt:16562856 0xfcbaa8 ubi_find_file: got 96846.dtb size 2348 /memory = 0x20000000 bytes @ 0x0 rdp param2 value 0x800000 in device tree larger than nvram value 0x400000. Use device tree value! Appending NVRAM to dtb, ret:0 Booting Linux on physical CPU 0x0 Linux version 4.1.45 (buildmgr@AONT26) (gcc version 5.3.0 (Buildroot 2016.02) ) #1 SMP PREEMPT Tue Mar 31 23:13:58 CST 2020 CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Broadcom BCM96846 Memory policy: Data cache writealloc PERCPU: Embedded 11 pages/cpu @dfbde000 s16192 r8192 d20672 u45056 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 123904 Kernel command line: coherent_pool=2M cpuidle_sysfs_switch pci=pcie_bus_safe bootversion=Mar-31-2020--23:07:20 PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 487748K/499712K available (4166K kernel code, 181K rwdata, 1300K rodata, 180K init, 637K bss, 11964K reserved, 0K cma-reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0018000 - 0xc056ea68 (5467 kB) .init : 0xc056f000 - 0xc059c000 ( 180 kB) .data : 0xc059c000 - 0xc05c9520 ( 182 kB) .bss : 0xc05c952c - 0xc0668adc ( 638 kB) Preemptible hierarchical RCU implementation. NR_IRQS:16 nr_irqs:16 16 Architected cp15 timer(s) running at 50.00MHz (phys). clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns Switching to timer-based delay loop, resolution 20ns BRCM Legacy Drivers' Helper, all legacy drivers' IO memories/interrupts should be remapped here Remapping interrupts... hwirq virq 43 20 44 21 45 22 46 23 47 24 48 25 61 26 124 27 125 28 70 29 213 30 214 31 215 32 216 33 217 34 218 35 219 36 220 37 92 38 93 39 154 40 155 41 156 42 157 43 131 44 130 45 160 46 161 47 162 48 163 49 164 50 165 51 166 52 167 53 168 54 169 55 170 56 171 57 172 58 173 59 174 60 175 61 176 62 177 63 178 64 179 65 180 66 181 67 182 68 183 69 184 70 185 71 186 72 187 73 188 74 189 75 190 76 191 77 146 78 Remapping IO memories... phys virt size 0000000080180000 00000000e0840000 00024000 00000000ffb00000 00000000e0808000 00006000 00000000ffb20000 00000000e0802000 00001000 0000000082000000 00000000e1000000 01000000 00000000ff800000 00000000e0810000 00003000 00000000ff854000 00000000e0814000 00001000 00000000ff858000 00000000e0818000 00003000 00000000ffe00000 00000000e0a00000 00100000 00000000ff860000 00000000e081c000 00002000 0000000083058600 00000000e0816600 00000100 000000008000c000 00000000e0820000 00003fff 0000000082db2000 00000000e0826000 00001000 000000008300c000 00000000e0828000 00001000 0000000083020000 00000000e082a000 00001000 0000000083038000 00000000e082c000 00001000 0000000083058000 00000000e082e000 00001000 0000000083064000 00000000e0830000 00001000 0000000083080000 00000000e0832000 00001000 00000000830a0000 00000000e0834000 00001000 00000000830a4000 00000000e0836000 00001000 00000000830ac000 00000000e0838000 00001000 00000000810a0000 00000000e083a000 00001000 0000000081060000 00000000e083c000 00003000 00000000ffff0000 00000000e0866000 00001000 0000000083000000 00000000e0868000 00001000 00000000830c0000 00000000e086a000 00001000 console [ttyS0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=50000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) --Kernel Config-- SMP=1 PREEMPT=1 DEBUG_SPINLOCK=0 DEBUG_MUTEXES=0 CPU: Testing write buffer coherency: ok Broadcom Logger v0.1 Setting up static identity map for 0x18220 - 0x18254 Reserved memory mapping... phys virt size fpm_pool 0x0f000000 0xcf000000 0x01000000 rnr_tbls 0x0e800000 0xce800000 0x00800000 pmc_init:PMC using DQM mode Successfully retrieved NVRAM data from dtb Failed to retrieve boot CFE version from dtb! Brought up 2 CPUs SMP: Total of 2 processors activated (200.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns futex hash table entries: 512 (order: 3, 32768 bytes) NET: Registered protocol family 16 DMA: preallocated 2048 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu Toggle reset of XRDP core... SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated skb_free_task created successfully with start budget 256 gbpm_do_work scheduled BLOG v3.0 Initialized BLOG Rule v1.0 Initialized Broadcom IQoS v0.1 initialized Broadcom GBPM v0.1 initialized Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher jffs2: version 2.2. (NAND) (SUMMARY)  2001-2006 Red Hat, Inc. fuse init (API version 7.23) io scheduler noop registered (default) nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 bcm63xx_nand ff801800.nand: Adjust timing_1 to 0x6532845b timing_2 to 0x00091e94 bcm63xx_nand ff801800.nand: detected 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4 nand: WARNING: brcmnand.0: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 Creating 9 MTD partitions on "brcmnand.0": 0x000000000000-0x000000080000 : "boot" 0x000000080000-0x000000100000 : "nvram" 0x000000100000-0x000002900000 : "image0" 0x000002900000-0x000005100000 : "image1" 0x000005100000-0x000006000000 : "logfs" 0x000006000000-0x000006800000 : "cfgfs" 0x000006800000-0x000006e00000 : "extfs" 0x000006e00000-0x000008000000 : "diagfs" 0x000008000000-0x000010000000 : "datafs" PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered NET: Registered protocol family 24 i2c /dev entries driver bcm96xxx-wdt ff800480.watchdog: Broadcom BCM96xxx watchdog timer brcmboard registered brcmboard: brcm_board_init entry print_rst_status: RESET reason: 0x00000000 DYING GASP IRQ Initialized and Enabled map_hw_timer_interrupt,127: interrupt_id 20 map_hw_timer_interrupt,127: interrupt_id 21 map_hw_timer_interrupt,127: interrupt_id 22 map_hw_timer_interrupt,127: interrupt_id 23 watchdog: add to proc fs ok printTaskInfo enter down hw watchdog enabled BOARD.G140WH PIN MUX Init done [brcm_board_init] done Serial: BCM63XX driver $Revision: 3.00 $ Magic SysRq with Auxilliary trigger char enabled (type ^ h for list of supported commands) ttyS0 at MMIO 0xff800640 (irq = 27, base_baud = 921600) is a BCM63XX i2c-bcm63000 ff802100.i2c: Broadcom BCM96xxx I2C driver bcm_i2c: check_sfp_i2c_device i2c bus 0 sfp soldered on board, add clients... bcm_i2c: add_sfp_i2c_client i2c device at address 0x60 does not exist! bcm_i2c: add_sfp_i2c_client i2c device at address 0x61 does not exist! bcm_i2c: add_sfp_i2c_client i2c device at address 0x66 does not exist! init the i2c bus0 sfp... WAN module detected on i2c bus 0: [NTC i2c] get_client: bus 0 client 0 does not exist Opticaldet: No TRX found on bus 0 rc -1 type 68 brcm_ponmode_add_fs... brcm_ponmode_add_fs ok. 1Optical detection module loaded. GACT probability on u32 classifier Performance counters on input device check on Actions configured nf_conntrack version 0.5.0 (7621 buckets, 30484 max) NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. Ebtables v2.0 registered ebt_time registered ebt_ftos registered ebt_wmm_mark registered 8021q: 802.1Q VLAN Support v1.8 Registering SWP/SWPB emulation handler ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "image0", size 40 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 320, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1735696301 ubi0: available PEBs: 0, total reserved PEBs: 320, PEBs reserved for bad PEB handling: 7 ubi0: background thread "ubi_bgt0d" started, PID 289 block ubiblock0_0: created from ubi0:0(rootfs_ubifs) VFS: Mounted root (squashfs filesystem) readonly on device 254:0. devtmpfs: mounted Freeing unused kernel memory: 180K [1970-01-01 00:00:03]MSG: system starting MSG: ubi_part=logfs ubi_port=/logs CMD: /opt/mtdtools/ubiattach /dev/ubi_ctrl -m 4 -d 4 ubi4: attaching mtd4 ubi4: scanning is finished ubi4: attached mtd4 (name "logfs", size 15 MiB) ubi4: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi4: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi4: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi4: good PEBs: 120, bad PEBs: 0, corrupted PEBs: 0 ubi4: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi4: max/mean erase counter: 8/3, WL threshold: 4096, image sequence number: 536678352 ubi4: available PEBs: 0, total reserved PEBs: 120, PEBs reserved for bad PEB handling: 4 ubi4: background thread "ubi_bgt4d" started, PID 630 CMD: mount -t ubifs /dev/ubi4_0 /logs UBIFS (ubi4:0): background thread "ubifs_bgt4_0" started, PID 640 UBIFS (ubi4:0): recovery needed UBIFS (ubi4:0): recovery completed UBIFS (ubi4:0): UBIFS: mounted UBI device 4, volume 0, name "0" UBIFS (ubi4:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi4:0): FS size: 12951552 bytes (12 MiB, 102 LEBs), journal size 2158592 bytes (2 MiB, 17 LEBs) UBIFS (ubi4:0): reserved for root: 0 bytes (0 KiB) UBIFS (ubi4:0): media format: w4/r0 (latest is w4/r0), UUID B4ABB60F-477F-4E63-8521-65E3ECE095AF, small LPT model UBIFS (ubi4:0): c->vi.name = 0 mount ok MSG: mount /dev/ubi4_0 /logs with ubi_err=0 MSG: /logs size is 11008KB MSG: touch /logs/.tag.ubifswr with ubi_err=0 MSG: ubi_part=cfgfs ubi_port=/configs CMD: /opt/mtdtools/ubiattach /dev/ubi_ctrl -m 5 -d 5 ubi5: attaching mtd5 ubi5: scanning is finished ubi5: attached mtd5 (name "cfgfs", size 8 MiB) ubi5: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi5: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi5: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi5: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi5: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi5: max/mean erase counter: 11/4, WL threshold: 4096, image sequence number: 1333018123 ubi5: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 4 ubi5: background thread "ubi_bgt5d" started, PID 666 CMD: mount -t ubifs /dev/ubi5_0 /configs UBIFS (ubi5:0): background thread "ubifs_bgt5_0" started, PID 676 UBIFS (ubi5:0): recovery needed UBIFS (ubi5:0): recovery completed UBIFS (ubi5:0): UBIFS: mounted UBI device 5, volume 0, name "1" UBIFS (ubi5:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi5:0): FS size: 5840896 bytes (5 MiB, 46 LEBs), journal size 1269760 bytes (1 MiB, 10 LEBs) UBIFS (ubi5:0): reserved for root: 0 bytes (0 KiB) UBIFS (ubi5:0): media format: w4/r0 (latest is w4/r0), UUID 7601A367-8AE3-47CA-A957-EB2FE20D118E, small LPT model UBIFS (ubi5:0): c->vi.name = 1 mount ok MSG: mount /dev/ubi5_0 /configs with ubi_err=0 MSG: /configs size is 4584KB MSG: touch /configs/.tag.ubifswr with ubi_err=0 MSG: ubi_part=datafs ubi_port=/flash CMD: /opt/mtdtools/ubiattach /dev/ubi_ctrl -m 8 -d 8 ubi8: attaching mtd8 ubi8: scanning is finished ubi8: attached mtd8 (name "datafs", size 128 MiB) ubi8: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi8: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi8: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi8: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi8: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi8: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 216512877 ubi8: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 16 ubi8: background thread "ubi_bgt8d" started, PID 702 CMD: mount -t ubifs /dev/ubi8_0 /flash UBIFS (ubi8:0): background thread "ubifs_bgt8_0" started, PID 712 UBIFS (ubi8:0): recovery needed UBIFS (ubi8:0): recovery completed UBIFS (ubi8:0): UBIFS: mounted UBI device 8, volume 0, name "0" UBIFS (ubi8:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi8:0): FS size: 125579264 bytes (119 MiB, 989 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) UBIFS (ubi8:0): reserved for root: 0 bytes (0 KiB) UBIFS (ubi8:0): media format: w4/r0 (latest is w4/r0), UUID 451F7FEF-C177-437E-8D2B-383C7F17F377, small LPT model UBIFS (ubi8:0): c->vi.name = 0 mount ok MSG: mount /dev/ubi8_0 /flash with ubi_err=0 MSG: /flash size is 112736KB MSG: touch /flash/.tag.ubifswr with ubi_err=0 MSG: ubi_part=log ubi_port=/logs MSG: ubi_part=cfg ubi_port=/configs MSG: ubi_part=data ubi_port=/flash sh: can't open '/usr/exe/ckpswd.sh' logrotate: Starting subsystem logrotate: rotation for *.err ... logrotate: rotation for *.log ... /etc/init.d/rcS: /etc/rcS.d/S86rgw.sh: line 17: can't create /proc/sys/vm/oom-kill: nonexistent directory ONT_TYPE=g140wh PON_MODE=GPON SOFTWAREVERSION=CGC.B30p01 PRODUCTCLASS=g140wh RELEASE=0.0.0 BUILDSTAMP= BUILDDATE=20200331_2305 COPYRIGHT=ASB WHOBUILD=buildmgr IMAGEVERSION=3FE48077CGCB30 NODE=f68d89874b24ab39df36f4376fbe5c087490cf29 REPO=sw SIGN=n VOIP=sip CONFIG_VOIP_SW=cvp CVP_REVISION=8b91a1ffef9f12a49025b7569install nand_drv driver! 76cff1f961154ed insmod nand_drv ... insmod extfs ... [extfs.drv]init: name=extfs size=0x600000 backups.offset=0x300000 erasesize=0x20000 writesize=0x800 [extfs.drv]module init. extfstool add BOSA success. insmod scfg module ... scfg module install ok. [hcfg] try to load /usr/cfg/hcfg/3FE48055AAAA.cfg ### Active Image ### Image 0, Version : 00000000 00000000 3FE48077CGCB30 insmod gpio_mgr ... board_type: G140WH gpio_mgr_init succ insmod netlinkmsg ... init netlink in netlinkmsg.ko superd start ... inmod led_drv ... Preparing to load uplink driver ... Establish bosa symbol link ... Loading bosa gn25l98 ... ***load GN25L98 bosa*** Can't find /configs/bosa/cfg.bob bosa init done. insmod lantiq SLIC driver ... IFXOS, Version 1.5.19 (c) Copyright 2009, Lantiq Deutschland GmbH TAPI, Version 4.14.0.3, (c) 2001-2014 Lantiq Deutschland GmbH IFX DUSLIC XS device driver, version 1.0.0.4, (c) 2014 Lantiq Deutschland GmbH insmod button_driver ... button_task_init: btn_get_cfgtbl success btn_poll_task_init: kthread_run btn_poll_task success btn_event_task_init: success insmod pwrmngtd.ko ... pwrmngtd: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint restore tr069.conf ... cp: can't stat '/etc/xmpp.conf': No such file or directory chmod: /configs/xmpp/xmpp.conf: No such file or directory cp: can't stat '/etc/xmpp_saas.conf': No such file or directory chmod: /configs/xmpp/xmpp_saas.conf: No such file or directory startup thttpd ... check igmpproxy.conf ... startup data guardian ... startup pwrmgr ... check certificate files before ONU registry... rsyslog start TZ ev /etc/localtime Generating rsyslog.conf rsyslogd starting /bcm/script/check_certificate_files.sh: cd: line 37: can't cd to /configs/X509 /bcm/script/check_certificate_files.sh: cd: line 48: can't cd to /logs/configs_key_data_bak/X509 certificate files are damaged in both /configs and /logs, cannot fix! Loading drivers and kernel modules... Initializing WLCSM Module WLCSM Module loaded successfully PCIe HCD (impl1) bcm963xx-pcie: found port [0] GEN2 Core Rev [3.21] with 1 Lanes bcm963xx-pcie bcm963xx-pcie.0: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff] pci_bus 0000:00: root bus resource [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI: bus1: Fast back to back transfers disabled pci 0000:00:00.0: BAR 8: assigned [mem 0x90000000-0x900fffff] pci 0000:01:00.0: BAR 0: assigned [mem 0x90000000-0x90007fff 64bit] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [mem 0x90000000-0x900fffff] pcieport 0000:00:00.0: enabling device (0140 -> 0142) pcieport 0000:00:00.0: Max Payload Size set to 128/ 512 (was 128), Max Read Rq 512 pci 0000:01:00.0: Max Payload Size set to 128/ 128 (was 128), Max Read Rq 512 bcm963xx-pcie: found port [1] GEN2 Core Rev [3.21] with 1 Lanes bcm963xx-pcie bcm963xx-pcie.1: PCI host bridge to bus 0001:00 pci_bus 0001:00: root bus resource [mem 0xa0000000-0xafffffff] pci_bus 0001:00: root bus resource [bus 00-ff] PCI: bus0: Fast back to back transfers disabled pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring PCI: bus1: Fast back to back transfers disabled pci 0001:00:00.0: BAR 8: assigned [mem 0xa0000000-0xa00fffff] pci 0001:01:00.0: BAR 0: assigned [mem 0xa0000000-0xa0007fff 64bit] pci 0001:00:00.0: PCI bridge to [bus 01] pci 0001:00:00.0: bridge window [mem 0xa0000000-0xa00fffff] pcieport 0001:00:00.0: enabling device (0140 -> 0142) pcieport 0001:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512 pci 0001:01:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512 NBUFF v1.0 Initialized Total # of labels = 62 Initialized fcache state Broadcom Packet Flow Cache Char Driver v4.0 Registered<3002> Created Proc FS /procfs/fcache Broadcom Packet Flow Cache registered with netdev chain Broadcom Packet Flow Cache learning via BLOG enabled. [FHW] pktDbgLvl[0xbf6c88c4]=0 [FHW] fhw_construct: Initialized Fcache HW accelerator layer state flwStatsThread created. numFlwsPerPoll 16383 maxFlwIdx 16383 Constructed Broadcom Packet Flow Cache v4.0 BPM: tot_mem_size=536870912B (512MB), buf_mem_size <9%> =48318381B (46MB), num of buffers=17975, buf size=2688 Broadcom BPM Module Char Driver v0.1 Registered<3004> Board not populated with PMD usbcore: registered new interface driver usblp wan_scratchpad_get: pon_mode gpon, wan_def_rate 0101GPON, wan_def_type GPON Scratch pad is not initialized. No scratch pad found. Initialize scratch pad... RDPA_MW: scratchpad get_or_init: WanRate - 0101GPON RDPA_MW: scratchpad get_or_init: RdpaWanType - GPON RDPA_MW: scratchpad get: DpuSplitSMode - œÙ»œÙŒœÙŒœÙÐœÙRo¿ RDPA_MW: scratchpad get: IptvTableSize -  RDPA_MW: scratchpad get: QmUsQueueSize -  INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() Creating CPU ring for queue number 17 with 16384 packets descriptor=0xbf4a9fe8, size_of_entry 8 Done initializing Ring 17 Base=0xd7840000 num of entries= 16384 RDD Base=17840000 descriptor=0xbf4a9fe8 Creating CPU ring for queue number 18 with 16384 packets descriptor=0xbf4aa048, size_of_entry 8 Done initializing Ring 18 Base=0xd7880000 num of entries= 16384 RDD Base=17880000 descriptor=0xbf4aa048 Creating CPU ring for queue number 16 with 16384 packets descriptor=0xbf4a9f88, size_of_entry 8 Done initializing Ring 16 Base=0xd78c0000 num of entries= 16384 RDD Base=178c0000 descriptor=0xbf4a9f88 INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() wan_scratchpad_get: pon_mode gpon, wan_def_rate 0101GPON, wan_def_type GPON RDPA_MW: scratchpad get_or_init: WanRate - 0101GPON RDPA_MW: scratchpad get_or_init: RdpaWanType - GPON [INF gponSerdes] wan_serdes_config: SERDES: Wan type: GPON [ERROR gponSerdes] PowerOffDevice,802: SERDES: Should be implemented in pmc drv!!! [ERROR gponSerdes] PowerOnDevice,814: SERDES: Should be implemented in pmc drv!!! [INF gponSerdes] pon_drv_gpon_init: SERDES: serdes initialization: GPON Start [INF gponSerdes] sgb_rescal_init: SERDES: WAN_TOP_RESCAL_STATUS_0 =0x6400013 [INF gponSerdes] pon_drv_gpon_init: SERDES: serdes initialization: Done [INF gponSerdes] wan_serdes_config: SERDES: Load microcode ... [INF gponSerdes] serdes_firmware_download: SERDES: TMP SKIP ... bp_parse:L419 Parsing board configuration for G140WH _assign_port_class:L161 set sw0 type 0 sw_create:L319 created sw0(name: )/parent:none read_init_cfg:L1128 system init_cfg: gbe_wan_emac=9 _assign_port_class:L161 set port0 type 1 enslave_port:L294 enslave port0 -> sw0 DBGV>bp_parse_port:L346 bp_parse_phy_dev: phyId=1 (EGPHY) c065faf4 DBGV>bp_parse_port:L349 bp_parse_mac_dev: port dc3b4800 macId=0 (UNIMAC) c065f9dc bp_parse_port_cap:L102 Unit 0, Port 0, (null) LAN/WAN Capability: LAN/WAN bp_parse_port:L405 backward compat unit 0 port 0 -> port_0:0 bp_parse_port:L408 backward oam unit 0 port 0 -> 0 _assign_port_class:L161 set port1 type 1 enslave_port:L294 enslave port1 -> sw0 DBGV>bp_parse_port:L346 bp_parse_phy_dev: phyId=2 (EGPHY) c065fb48 DBGV>bp_parse_port:L349 bp_parse_mac_dev: port dc3b4600 macId=1 (UNIMAC) c065f9e8 bp_parse_port_cap:L102 Unit 0, Port 1, (null) LAN/WAN Capability: LAN/WAN bp_parse_port:L405 backward compat unit 0 port 1 -> port_0:1 bp_parse_port:L408 backward oam unit 0 port 1 -> 1 _assign_port_class:L161 set port2 type 1 enslave_port:L294 enslave port2 -> sw0 DBGV>bp_parse_port:L346 bp_parse_phy_dev: phyId=3 (EGPHY) c065fb9c DBGV>bp_parse_port:L349 bp_parse_mac_dev: port dc3b4400 macId=2 (UNIMAC) c065f9f4 bp_parse_port_cap:L102 Unit 0, Port 2, (null) LAN/WAN Capability: LAN/WAN bp_parse_port:L405 backward compat unit 0 port 2 -> port_0:2 bp_parse_port:L408 backward oam unit 0 port 2 -> 2 _assign_port_class:L161 set port3 type 1 enslave_port:L294 enslave port3 -> sw0 DBGV>bp_parse_port:L346 bp_parse_phy_dev: phyId=4 (EGPHY) c065fbf0 DBGV>bp_parse_port:L349 bp_parse_mac_dev: port dc3b4200 macId=3 (UNIMAC) c065fa00 bp_parse_port_cap:L102 Unit 0, Port 3, (null) LAN/WAN Capability: LAN/WAN bp_parse_port:L405 backward compat unit 0 port 3 -> port_0:3 bp_parse_port:L408 backward oam unit 0 port 3 -> 3 DBGV>create_rdpa_port:L835 (if=1e, emac=9, owner= (null)) INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() create_rdpa_port:L896 Created RDPA port: port/index=switch port_runner_sw_init:L1174 Initialized runner switch sw0 enet_create_netdevice:L1691 registered netdev bcmsw for sw0 kerSysGetMacAddress:0 demux_on_sw:L239 demux port_0:0: sw0:3 DBGV>create_rdpa_port:L835 (if=3, emac=0, owner= (null)) INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() create_rdpa_egress_tm:L818 Created RDPA egress tm egress_tm/dir=ds,index=0 create_rdpa_port:L896 Created RDPA port: port/index=lan0 port_runner_port_init:L1082 Initialized runner port port_0:0 enet_create_netdevice:L1691 registered netdev eth0 for port_0:0 kerSysGetMacAddress:0 port_mtu_set:L522 port mtu set port_0:0: mtu:1998 port_init:L578 initialized object port_0:0 demux_on_sw:L239 demux port_0:1: sw0:4 DBGV>create_rdpa_port:L835 (if=4, emac=1, owner= (null)) INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() create_rdpa_egress_tm:L818 Created RDPA egress tm egress_tm/dir=ds,index=1 create_rdpa_port:L896 Created RDPA port: port/index=lan1 port_runner_port_init:L1082 Initialized runner port port_0:1 enet_create_netdevice:L1691 registered netdev eth1 for port_0:1 kerSysGetMacAddress:0 port_mtu_set:L522 port mtu set port_0:1: mtu:1998 port_init:L578 initialized object port_0:1 demux_on_sw:L239 demux port_0:2: sw0:5 DBGV>create_rdpa_port:L835 (if=5, emac=2, owner= (null)) INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() create_rdpa_egress_tm:L818 Created RDPA egress tm egress_tm/dir=ds,index=2 create_rdpa_port:L896 Created RDPA port: port/index=lan2 port_runner_port_init:L1082 Initialized runner port port_0:2 enet_create_netdevice:L1691 registered netdev eth2 for port_0:2 kerSysGetMacAddress:0 port_mtu_set:L522 port mtu set port_0:2: mtu:1998 port_init:L578 initialized object port_0:2 demux_on_sw:L239 demux port_0:3: sw0:6 DBGV>create_rdpa_port:L835 (if=6, emac=3, owner= (null)) INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() create_rdpa_egress_tm:L818 Created RDPA egress tm egress_tm/dir=ds,index=3 create_rdpa_port:L896 Created RDPA port: port/index=lan3 port_runner_port_init:L1082 Initialized runner port port_0:3 enet_create_netdevice:L1691 registered netdev eth3 for port_0:3 kerSysGetMacAddress:0 port_mtu_set:L522 port mtu set port_0:3: mtu:1998 port_init:L578 initialized object port_0:3 sw_init:L649 initialized sw0 Creating CPU ring for queue number 4 with 1024 packets descriptor=0xbf4a9b08, size_of_entry 16 Done initializing Ring 4 Base=0xd7808000 num of entries= 1024 RDD Base=17808000 descriptor=0xbf4a9b08 Creating CPU ring for queue number 3 with 1024 packets descriptor=0xbf4a9aa8, size_of_entry 16 Done initializing Ring 3 Base=0xd7820000 num of entries= 1024 RDD Base=17820000 descriptor=0xbf4a9aa8 enetxapi_queues_init:L513 configured RDPA CPU queues Broadcom 802.1Q VLAN Interface, v0.1 Loading gponstack module... LOGGER driver Init Done: 0 Loading bcmgpon module... INF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() INF: bdmf_neINF: bdmf_mattr_set#4142: : success. bdmf_mattr_set() w_and_set#491Creating CPU ring for queue number 6 with 512 packets descriptor=0xbf4a9bc8, size_of_entry 16 Done initializing Ring 6 Base=0xd7814000 num of entries= 512 RDD Base=17814000 descriptor=0xbf4a9bc8 INF: bdmf_attrelem_set_as_num#1150: system: success. attribute:cpu_reason_to_tc value:6 INF: bdmf_attrelem_set_as_num#1150: cpu/index=host: success. attribute:tc_to_rxq value:6 : port: succe[NTC ploamFsm] printSerialPasswd: SN=33:46:45:34:XX:XX:XX:XX [NTC ploamFsm] printSerialPasswd: PW=20:20:20:20:20:20:20:20:20:20 dgasp: kerSysRegisterDyingGaspHandler: gpon0 registered [NTC ploamFsm] bcm_ploamCreate: ploam driver created. Creating CPU ring for queue number 5 with 64 packets descriptor=0xbf4a9b68, size_of_entry 16 Done initializing Ring 5 Base=0xd7817000 num of entries= 64 RDD Base=17817000 descriptor=0xbf4a9b68 ss: object:port/index=wan0 INF: bdmf_new_and_set#491: gpon: success: object:gpon INF: bdmf_attrelem_set_as_num#1150: port/index=wan0: success. attribute:cpu_obj value:-567351668 INF: bdmf_attrelem_set_as_num#1150: system: success. attribute:cpu_reason_to_tc value:5 INF: bdmf_attrelem_set_as_num#1150: cpu/index=host: success. attribute:tc_to_rxq value:5 Initializing bdmf shell... Loading resource management module... Initializing system... insmod phy_driver... Install phyadpt.ko Loading Gpon.... Initializing port... ploam begin Loading bcm ioctl driver.... Loading klpd driver... insmod: can't insert '/lib/driver/klpd.ko': unknown symbol in module or invalid parameter Loading bridge fast-path module... Loading flow cache module... Loading conntrack module and iptables... insmod: can't read '/lib/modules/4.1.45/nf_conntrack.ko': No such file or directory Loading USB Module... insmod: can't insert '/lib/modules/4.1.45/usblp.ko': File exists insmod bcmhook... Loading bcm wlan module... /configs/bcm dir exists bcm43217_map.bin exists bcm4352_map.bin exists bcm43217_nvramvars.bin exists bcm4352_nvramvars.bin exists bcmcmn_nvramvars.bin exists pid 1644's current scheduling policy: SCHED_OTHER pid 1644's current scheduling priority: 0 pid 1644's new scheduling policy: SCHED_RR pid 1644's new scheduling priority: 5 pid 1651's current scheduling policy: SCHED_OTHER pid 1651's current scheduling priority: 0 pid 1651's new scheduling policy: SCHED_RR pid 1651's new scheduling priority: 5 pid 1647's current scheduling policy: SCHED_OTHER pid 1647's current scheduling priority: 0 pid 1647's new scheduling policy: SCHED_RR pid 1647's new scheduling priority: 5 pid 1654's current scheduling policy: SCHED_OTHER pid 1654's current scheduling priority: 0 pid 1654's new scheduling policy: SCHED_RR pid 1654's new scheduling priority: 5 insmod dyingasp... Loading iptv... Loading linux_if Loading linux bridge... Initializing filter... Loading igmp driver... igmpdrv k_igmp_drv_init igmpmap IgmpMapFilterConfig IPTV Filter mode changed from 1 to 5 Loading dhcp driver... ====================@VoIP: starting@================= [startup] appmgr starting [startup] runing /bin/messagebus start & [startup] runing /sbin/msgmgr & $Starting system message bus: ====================@VoIP: started@================= Start diagnosis add_omci_ssh_user... Start daemon... run after app start... Daemon silent 120 second! run selftest ... phy_test PHY[0] vendor ID: 0xae0251e1 phy_test PHY[1] vendor ID: 0xae0251e1 phy_test PHY[2] vendor ID: 0xae0251e1 phy_test PHY[3] vendor ID: 0xae0251e1 phy: OK bosa: OK Please check with PCIe nodes... 0000 14e46846 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 0100 14e4a8db 26 90000004 0 0 0 0 0 0 8000 0 0 0 0 0 0 wl 0000 14e46846 27 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 0100 14e44360 27 a0000004 0 0 0 0 0 0 8000 0 0 0 0 0 0 wl wifi: OK slac: OK There is 2 USB device on this ONU There is no USB device inserted ! usb: OK selftest 5/5 PASS there is no LED indication for G140WH main selftest OK! Go checking phy_ed_thresh MSG: start mdev wl: Not up sh: -60: unknown operand [startup] runing /sbin/ledmgr & [startup] runing /sbin/wifihostd & [startup] runing /sbin/ndk_wand & [startup] runing /sbin/rgwd & [startup] loading cfgmgr [startup] runing /sbin/cfgmgr INFO: boot fail count: 3 [IPC_TIMER]Start timer ... [ndbus][dbus][1994: 0xb6fa7000][22.022388][wa][ndk_timer][ndbusMainLoop:555]Main thread errno address:0xb6fa74d0 [ndbus][dbus][1994: 0xb6d4c470][22.030681][wa][ndk_timer][thread_entry:463]Child thread errno address:0xb6d4c940 system_call+150: touch /tmp/WLAN_IS_RUNNING ERR: cfgmgr is crashed or blocked. [1970-01-01 00:00:22]MSG: startupdone.as cfgmgr not ready 1 times [ndbus][dbus][2056: 0xb6fb5000][22.544750][wa][ledmgr][ndbusMainLoop:555]Main thread errno address:0xb6fb54e4 [ndbus][dbus][2056: 0xb62ca450][22.551237][wa][ledmgr][thread_entry:463]Child thread errno address:0xb62ca934 wl_dyn_bwsw_params: fail to set 1 error Setting SSID: "BCM11AC_0" Setting SSID: "BCM11AC_1" Setting SSID: "BCM11AC_2" Setting SSID: "BCM11AC_3" % Unknown command. % Unknown command. Hello, Welcome to User CLI (version 0.95). user> ndk wand starting ... rgwd starting ... rgw_wan_init NRAppSysConfig -------------------------------------------------------- platform: 1 uplink_mode: 1 -------------------------------------------------------- [ndbus][dbus][2112: 0xb6f9b000][23.147364][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadHostsCache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [ndbus][dbus][2109: 0xb6f6fb60][23.195194][wa][ndk_wand][ndbusMainLoop:555]Main thread errno address:0xb6f70030 [ndbus][dbus][2109: 0xb67f8450][23.201229][wa][ndk_wand][thread_entry:463]Child thread errno address:0xb67f8920 wl: Unsupported wl: Unsupported wl: Unsupported wl: Unsupported Setting SSID: "BCM11BGN_0" Setting SSID: "BCM11BGN_1" Setting SSID: "BCM11BGN_2" Setting SSID: "BCM11BGN_3" [ndbus][dbus][2112: 0xb6f9b000][24.411666][wa][rgwd][ndbusMainLoop:555]Main thread errno address:0xb6f9b4d0 [ndbus][dbus][2112: 0xb67de450][24.419145][wa][rgwd][thread_entry:463]Child thread errno address:0xb67de920 [startup] cfgmgr is running wl: Unsupported [startup] cfgmgr start loading DB wl: Unsupported wl: Unsupported [ndbus][dbus][2017: 0xb6f89910][24.864397][wa][wifihostd][ndbusMainLoop:555]Main thread errno address:0xb6f89de0 [ndbus][dbus][2017: 0xb5eff470][24.873053][wa][wifihostd][thread_entry:463]Child thread errno address:0xb5eff940 initMemoryMngt(): potsNum = 1, adjust_syssemi_size = 692224, adjust_sysheap_size = 614400 common_pools: need 149248 bytes memory msgbuf_pool_appl: need 117584 bytes memorynr_commands=0,max_links=200 redirect_mode_set 139 mode=2 nr_commands=1,max_links=200 nr_commands=2,max_links=200 nr_commands=3,max_links=200 SipwStartup, fetched maxPrtZips=1 nr_commands=4,max_links=200 === MsgHandler::initTable : partNumber =3FE48055AAAA === enter getCurrentLineMap... nr_commands=5,max_links=200 GVHW initialization, current onu_maxlines 1 is nr_commands=6,max_links=200 tpUpdateLocaleProfile: Openning file /usr/etc/alcatel/config/USA_profile.xml ... tpUpdateLocaleProfile: the size of file /usr/etc/alcatel/config/USA_profile.xml is 30404 tpFile_copyToBuffer: line 83, filename /usr/etc/alcatel/config/USA_profile.xml [startup] cfgmgr after loading database start load custom config Wan System Configuration ======================================================= model: 1 defaultGwMode: 0 staticDefaultGwItfName: policyRoutingMode: 1 dnsMode: 1 serialNumber: ALCLXXXXXXXX oui: 98865D pppConLostMode: 0 operatorId: BRZL snInOp60Rule: 0 dhcpIntervalMode: 0 op60OperatorMode: 1 dhcpMaxInitTimer: 0 dhcpMaxSessTimer: 16 upLinkWorkMode: Normal isBrgSupported: 0 ======================================================= [startup] cfgmgr syncdata2rgwd [ndbus][dbus][2112: 0xb6f9b000][26.352817][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.lanhostd:FindLanhostEntry, ms=5000 : The name nokia.ndk.lanhostd was not provided by any .service files enable FixedWanMac Func by App. [startup] cfgmgr syncdata2rgwd done sal_netModelInit:L1816 [DEBUG]: to be implemented for brcm Fill DB initial values. ERR sal_hgu_init: t=27:89 Invoked ERR hal_hgu_qos_init:Entering Function RouteMacMgr pid=2267 create new file /tmp/brcm_route_mac.rm halDp_initSyncFile pid=2267 fp=0x90b500 fd=7 isIcCreated: 0 icReferenceNum: 0 routedMacNum: 0 ipClassRoutedMacNum: 0 ingressClassIndex.dir: 0 ingressClassIndex.index: 0 ipClassRoutedMacIndexUsed[0]: 0 ipClassRoutedMacIndexUsed[1]: 0 ipClassRoutedMacIndexUsed[2]: 0 Function stl_LogServerObject() is called Function stl_LogServerObject() is called Function stl_LogServerObject() is called Function stl_LogServerObject() is called Function stl_LogServerObject() is called Function stl_LogServerObject() is called Function stl_LogServerObject() is called InstanceAlias is OFF ERR: cfgmgr is crashed or blocked. [1970-01-01 00:00:27]MSG: startupdone.as cfgmgr not ready 2 times [startup] cfgmgr entering main loop [ndbus][dbus][2267: 0xb609c000][27.495131][wa][cfgmgr][ndbusMainLoop:555]Main thread errno address:0xb609c4e4 [ndbus][dbus][2267: 0xb586c450][27.498174][wa][cfgmgr][thread_entry:463]Child thread errno address:0xb586c934 [VOIP]enter lantiq_slic_reset ********lantiq_slic_reset() end!************ sh: /sbin/agent: not found init usb succeed! [startup stage1_boot 0/78] -> cfgmgr cfg_bootevtmgr [startup] cfgmgr find_voip_interface out [ndbus][dbus][2346: 0xb6f82300][27.671713][wa][ramond][ndbusMainLoop:555]Main thread errno address:0xb6f827e4 [ndbus][dbus][2346: 0xb6ab9450][27.676880][wa][ramond][thread_entry:463]Child thread errno address:0xb6ab9934 [startup] cfgmgr VOIP wan found at IP WAN 1.2 [startup] cfgmgr running /sbin/evtmgr -i pon_220_4_1 & [startup stage1_boot 0/78] <- cfgmgr cfg_bootevtmgr [46ms] [startup stage1_boot 1/78] -> cfgmgr cfg_bootUplinkMgr tr181_enabled: TR181 = 1 [startup stage1_boot 1/78] <- cfgmgr cfg_bootUplinkMgr [9ms] [startup stage1_boot 2/78] -> cfgmgr cfg_bootDeviceInfo [startup] cfgmgr: InternetGatewayDevice.DeviceInfo.X_ASB_COM_AbstractSerialNumber is ALCLXXXXXXXX [startup stage1_boot 2/78] <- cfgmgr cfg_bootDeviceInfo [86ms] [startup stage1_boot 3/78] -> cfgmgr cfg_bootUps [startup stage1_boot 3/78] <- cfgmgr cfg_bootUps [23ms] [startup stage1_boot 4/78] -> cfgmgr cfg_bootportMgr UPS main() is starting........ [startup stage1_boot 4/78] <- cfgmgr cfg_bootportMgr [195ms] [startup stage1_boot 5/78] -> cfgmgr cfg_bootomciMgr [startup] evtmgr: starting with voip interface: pon_220_4_1 [startup stage1_boot 5/78] <- cfgmgr cfg_bootomciMgr [93ms] [startup stage1_boot 6/78] -> cfgmgr cfg_bootcfmMgr PortMgr main() is starting........ [startup stage1_boot 6/78] <- cfgmgr cfg_bootcfmMgr [17ms] [startup stage1_boot 7/78] -> cfgmgr cfg_bootPreCfgFlag [startup stage1_boot 7/78] <- cfgmgr cfg_bootPreCfgFlag [0ms] [startup stage1_boot 9/78] -> cfgmgr cfg_bootCleanWanData [startup stage1_boot 9/78] <- cfgmgr cfg_bootCleanWanData [319ms] [startup stage1_boot 10/78] -> cfgmgr cfg_bootPsemgr [startup stage1_boot 10/78] <- cfgmgr cfg_bootPsemgr [1ms] [startup stage1_boot 12/78] -> cfgmgr cfg_bootIGMPJoin sh: can't create /proc/kum_igmp: nonexistent directory [startup stage1_boot 12/78] <- cfgmgr cfg_bootIGMPJoin [19ms] [startup stage1_boot 13/78] -> cfgmgr cfg_bootHguLan isInitializedCfmTxRx [12-31 22:00:28][OMCI]isInitializedParser() cfm_register_callback init succeeded, error = 0x00000000 EthOAM -> ethOAM_RawSock_Init() -> OK Sorry, rule does not exist. device br0 already exists; can't create bridge with the same name enet_ioctl_compat:L2466 SIOCGPONIF _assign_port_class:L161 set port4 type 2 enslave_port:L294 enslave port4 -> sw0 port_init:L502 port object already initialized: port_0:0 port_init:L502 port object already initialized: port_0:1 libONU_HGUSinglePort() PPTP=All [12-31 22:00:28][OMCI]********OMCI Config Data Begin**************** [12-31 22:00:28][OMCIport_init:L502 port object already initialized: port_0:2 ]****ONU Type : 1 [12-31 22:00:28][OMCI]****max lan num : 4 [12-31 22:00:28][OMCI]****max wifi num: 8 [12-31 22:00:28][OMCI]port_init:L502 port object already initialized: port_0:3 ****max wifi id start: 4 [12-31 22:00:29][OMCI]****check wifi state: no [12-31 22:00:29][demux_on_sw:L239 demux port_0:0: sw0:0 OMCI]****voip stream map port: 13 ****wifi port number: 8 [12-31 22:00:29][OMCI]****port 0 config by oenet_create_netdevice:L1691 registered netdev gpondef for port_0:0 mci: 0 [12-31 22:00:29][OMCI]****port 1 config by omci: 1 [12-31 22:00:29][OMCI]****port 2 config by omci: 0 [12-31 22:00:29][OMCI]****port 3 config by omci: 0 [12-31 22:00:29][OMCI]****port 4 config by omci: 0 [12-31 22:00:29][OMCI]****port 5 config by omci: 0 [12-31 22:00:29][OMCI]****port 6 confport_mtu_set:L522 port mtu set port_0:0: mtu:1998 ig by omci: 0port_init:L578 initialized object port_0:0 sw_init:L649 reinitialized sw0 [12-31 22:00:29][OMCI]****port 7 config by omci: 0 [12-31 22:00:29][OMCI]****port 8 config by omci: 0 [12-31 22:00:29][OMCI]****port 9 config by omci: 0 [12-31 22:00:29][OMCI]****port 10 config by omci: 0 [12-31 22:00:29][OMCI]****port 11 config by omci: 0 [1enet_open:L634 gpondef: opened 2-31 22:00:29][OMCI]****dscp to Pbit for untag Config By OMCI: yes [12-31 22:00:29][OMCI]****support double tag rules us: yes [12-31 22:00:29][OMCI]****support double tag rules ds: yes [12-31 22:00:29][OMCI]****support pbit Unmatch Rules: yes [12-31 22:00:29][OMCI]****support Bcast Unmatch Rules: no [12-31 22:00:29][OMCI]****support omci manage HGU port: no [12-31 22:00:29][OMCI]****HGU single port=false [12-31 22:00:29][OMCI]****support omci replace after ranging : no [12-31 22:00:29][OMCI]****support Dynamic Tpid : no [12-31 22:00:29][OMCI]****support Cox : no [12-31 22:00:29][OMCI]****factory mode: 0 [12-31 22:00:29][OMCI]****support 1588 : no [12-31 22:00:29][OMCI]****support SyncE : no [12-31 22:00:29][OMCI]********OMCI Config Data End**************** [12-31 22:00:29][OMCI] user_port class domain =================================== [12-31 22:00:29][OMCI] 1 ETH HGU [12-31 22:00:29][OMCI] 2 ETH SFU [12-31 22:00:29][OMCI] 3 ETH HGU [12-31 22:00:29][OMCI] 4 ETH HGU [12-31 22:00:29][OMCI] 1 WIFI HGU [12-31 22:00:29][OMCI] 2 WIFI HGU [12-31 22:00:29][OMCI] 3 WIFI HGU [12-31 22:00:29][OMCI] 4 WIFI HGU [12-31 22:00:29][OMCI] 5 WIFI HGU [12-31 22:00:29][OMCI] 6 WIFI HGU [12-31 22:00:29][OMCI] 7 WIFI HGU [12-31 22:00:29][OMCI] 8 WIFI HGU [12-31 22:00:29][OMCI] 13 POTS SFU [12-31 22:00:29][OMCI] 1 UNKW HGU [12-31 22:00:29][OMCI]=================================== Set inetnert LED mode is same: 0 phy_test PHY[0] vendor ID: 0xae0251e1 phy_test PHY[1] vendor ID: 0xae0251e1 phy_test PHY[2] vendor ID: 0xae0251e1 phy_test PHY[3] vendor ID: 0xae0251e1 phy: OK bosa: OK Please check with PCIe nodes... 0000 14e46846 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 0100 14e4a8db 26 90000004 0 0 0 0 0 0 8000 0 0 0 0 0 0 wl 0000 14e46846 27 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 0100 14e44360 27 a0000004 0 0 0 0 0 0 8000 0 0 0 0 0 0 wl [startup] evtmgr: enter main loop. wifi: OK slac: OK There is 2 USB device on this ONU There is no USB device inserted ! usb: OK selftest 5/5 PASS there is no LED indication for G140WH phy_test PHY[0] vendor ID: 0xae0251e1 phy_test PHY[1] vendor ID: 0xae0251e1 phy_test PHY[2] vendor ID: 0xae0251e1 phy_test PHY[3] vendor ID: 0xae0251e1 phy: OK bosa: OK Please check with PCIe nodes... 0000 14e46846 26 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 0100 14e4a8db 26 90000004 0 0 Reset igmp snooping. 0 0 0 0 8000 0 0 0 0 0 0 wl 0000 14e46846 27 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 0100 14e44360 27 a0000004 0 0 0 0 0 0 8000 0 0 0 0 0 0 wl be ready to create the interface:[gpondef][gpon0][0]. be ready to get the interface:[gpon0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: gpon0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. wifi: OK slac: OK There is 2 USB device on this ONU There is no USB device inserted ! usb: OK selftest 5/5 PASS there is no LED indication for G140WH hal_ont_capability_init max_uni_port 4 hal_ont_capability_init mnemonic buffer G-140W-H init the rateLimit. the ontServiceTypeLen:[0]. be ready to ready to read ontServiceType from file:[/configs/ont_service_type]. the current ontServiceType:[HGU]. >>>isBatteryPower(0), isBatteryMissing(0), isBatteryFailure(0), isBatteryLow(0) Create sipwQ =294921 >>>>>>SAL_ChangeLEDByPowerState BoardType=39 nr_commands=7,max_links=200 nr_commands=8,max_links=200 #sipcommon_root start nr_commands=9,max_links=200 #InitCommon start nr_commands=10,max_links=200 nr_commands=11,max_links=200 for Func:[hal_initRateLimit],get the serviceType:[HGU] success. The ONT Operation_Id is not SFU, needn't init the RateLimit. libigmp_getPacketIsolation() get packet isolation is 1 [12-31 22:00:29][OMCI]InitPortStream() maxPort=13, enet=12,moca=0 [12-31 22:00:29][OMCI]InitPortStream:: ONU type is HGU [12-31 22:00:29][OMCI]Use extend flow service EthManageItf::getInstance: without switch. be ready to set Priority for Bridge-Interface:[2]. get the port:[2]'s PhyPort:[1] info for Board:[G-140W-H] Success. OG_DRV_IOC_IOCTL failed, cmd:56 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:59 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:56 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:59 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:56 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:59 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:56 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:59 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:56 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:59 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:56 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:59 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:56 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:59 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:56 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:59 hal_bcm_send_ioctl_cmd :: ioctl failed. is_xfp: sfp_get_type fail, ret=255 RSSI_lib_get: getSFPPartNumber failed leave tm_event() nr_commands=12,max_links=200 be ready to create the interface:[gpondef][iphost0][0]. be ready to get the interface:[iphost0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: iphost0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. be ready to create the interface:[gpon0][gpon0.ani][0]. be ready to get the interface:[gpon0.ani],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: gpon0.ani is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. nr_commands=13,max_links=200 >>>>>>>>printThresh ponRxHighThresh = -7.000571 ponRxLowThresh = -27.958799 ponTxHighThresh = 6.000031 ponTxLowThresh = -0.499761 ponBiasHighThresh = 70.000000 ponBiasLowThresh = 1.000000 ponTempLowThresh = -5.000000 ponTempHighThresh = 85.000000 ponVolHighThresh = 3.600000 ponVolLowThresh = 3.000000 ponTempLowWarnThresh = 0.000000 ponTempHighWarnThresh = 80.000000 ponVolHighWarnThresh = 3.470000 ponVolLowWarnThresh = 3.130000 ponBiasHighWarnThresh = 0.000000 ponBiasLowWarnThresh = 0.000000 ponRxHighWarnThresh = 0.000000 ponRxlLowWarnThresh = 0.000000 ponTxHighWarnThresh = 0.000000 ponTxLowWarnThresh = 0.000000 [OMCI]HAL_OMCI_FUNC_GET_PONTAG be ready to create the interface:[gpon0.ani][veip0][0]. be ready to get the interface:[veip0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: veip0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. [sys] yapi registerContainer(cid): 4 PORT_CONFIG_DATA message received timer created successfully with id 1cfad10 timer created successfully with id 1cfae10 Voice Service PortMgr Created! timer created successfully with id 1cfb058 timer created successfully with id 1cfb158 Eth Service PortMgr Created! timer created successfully with id 1cfae20 timer created successfully with id 1cfb3d0 Wifi PortMgr Created! timer created successfully with id 1cfb168 timer created successfully with id 1cfb650 Usb PortMgr Created! [12-31 22:00:29][OMCI]reset_all_tsched ... be ready to create the interface:[gpon0.ani][voip0][0]. nr_commands=14,max_links=200 be ready to get the interface:[voip0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: voip0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. nr_commands=15,max_links=200 #pmc start #vm start #linetest start SLID Enabledcreate the lanPort:[1],portClass:[0]'s default egress_tm:[0]. free one time entry !!!!!!!!!!!!!!PbitQueueTableMgr @ 112 table_max_id = 16; ERR: bdmf_new_and_set#501: pbit_to_queue: error:Entry already exists (-7) OG_DRV_IOC_IOCTL failed, cmd:74 hal_bcm_send_ioctl_cmd :: ioctl failed. [L2F][ERR] soc_qos_create_pbit_to_queue:37:table id =0 ret=-1 Dec 31 22:00:29 [ERROR] hal_qos_queue.cc:720 table id =0 create the lanPort:[2],portClass:[0]'s default egress_tm:[1]. create the lanPort:[3],portClass:[0]'s default egress_tm:[2]. create the lanPort:[4],portClass:[0]'s default egress_tm:[3]. nr_commands=16,max_links=200 [12-31 22:00:29][OMCI]saveMsgQueueInfo qid=327690,key=0x300004bf [12-31 22:00:29][OMCI]save new key=0x300004bf, qid=327690 to /tmp/omci.q.log [12-31 22:00:29][OMCI]thread_id=-1269992368 [12-31 22:00:29][OMCI]saveMsgQueueInfo qid=262152,key=0x10004bf [12-31 22:00:29][OMCI]save new key=0x10004bf, qid=262152 to /tmp/omci.q.log libQos_GetOmciQosInfo() get omci qos config is 0 [12-31 22:00:29][OMCI]pid=2476 enter hal_lpd_init be ready to create the interface:[gpondef][wan0][0]. be ready to get the interface:[wan0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wan0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. wan0: failed insert local address bridge forwarding table rut_initHguAddLan2Bridge.... - WORKMODE = RGW Cann't open file init hal loop detect fail. [12-31 22:00:30][OMCI]register loop detect callback failed [12-31 22:00:30][OMCI]evtNotifyHandleFunInit ... [12-31 22:00:30][OMenet_open:L634 eth0: opened CI]CfgmgrevtNotifyHandleFunInit ... libigmp_GetIGMPMaxGroups() get igmp max group is 256 [12-31 22:00:30][OMCI]configMcastFlow ... lib_get_voipType voiceType 1 lib_get_WifiAsPPTP_Status() get PreferWifiAsPPTP is 1 lib_get_WifiAsDot11_Status() get PreferWifiAsdot11 is 0 [12-31 22:00:30][OMCI]>>>>getSwVerInfo(),imageBank:0,version:3FE48077CGCB30 [12-31 22:00:30][OMCI]special_process_depended_board: call swdl_commit. be ready to create the interface:[eth0][eth0.0][0]. be ready to get the interface:[eth0.0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: eth0.0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. JON: rut_initHguAddLan2Bridge...., vif_name is: eth0.0 JON: nrut_initHguAddLan2Bridge.... - not adding eth0.0 to bridge OG_DRV_IOC_READ failed: 4, queueType: 2 ploamTxRx_thread(): ploamTxRx_thread(OG_DRV_IOC_READ:PLOAM) failed -1. deal with the cmd's result:[0]. enet_open:L634 eth1: opened rut_initHguAddLan2Bridge........... sh: /sbin/qtn_upgrade_cli: not found OG_DRV_IOC_READ failed: 4, queueType: 2 ploamTxRx_thread(): ploamTxRx_thread(OG_DRV_IOC_READ:PLOAM) failed -1. [12-31 22:00:30][OMCI]OMCI_LIB: OmciMain:: got 'ONU_SWIMAGE_INFO' with value 0xb [12-31 22:00:30][OMCI]>>>>getSwVerInfo(),imageBank:1,version:3FE48077CGCB30 [12-31 22:00:30][OMCI]OMCI_LIB: Success to create OMCI mib upload share memory, pointer 0xb3cc6000 [12-31 22:00:30][OMCI]checkPonLEDStatus:Fiber disconnected ds_sec=-1 Inside GatewayUniSupp_1Itf::GatewayUniSupp_1Itf constructor PWRSHED_ATTR_SET message received! PwrShed Timers are eth<0> pots<0> ces<0> video<0> xdsl<0> restore<0>, and batteryStatus is <0> [12-31 22:00:30][OMCI]getLoidAuthInfo() exit @ 0m:30s:575ms, : [12-31 22:00:30][OMCI] - create_instance_auto() act_plugInUnitType = 48 [12-31 22:00:30][OMCI] - create_instance_auto() act_plugInUnitType = 47 create auto instanmce gateway uni ME succesful create auto instanmce gateway uni ME succesful create auto instanmce gateway uni ME succesful create auto instanmce gateway uni ME succesful create auenet_open:L634 eth2: opened to instanmce gateway uni ME succesful create auto instanmce gateway uni ME succesful create auto instanmce gateway uni ME succesful create auto instanmce gateway uni ME succesful create auto instanmce gateway uni ME succesful create auto instanmce gateway uni ME succesful create auto instanmce gateway uni ME succesful create auto instanmce gateway uni ME succesful [12-31 22:00:30][OMCI]getLoidAuthInfo() exit @ 0m:30s:625ms, : AnigSupp_1 creat [12-31 22:00:30][OMCI]saveMsgQueueInfo qid=458766,key=0x10001 [12-31 22:00:30][OMCI]save new key=0x10001, qid=458766 to /tmp/omci.q.log Mib Upload for GatewayUniSupp_1Itf ME be ready to create the interface:[eth2][eth2.0][0]. be ready to get the interface:[eth2.0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: eth2.0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. JON: rut_initHguAddLan2Bridge...., vif_name is: eth2.0 JON: nrut_initHguAddLan2Bridge.... - not adding eth2.0 to bridge deal with the cmd's result:[0]. enet_open:L634 eth3: opened be ready to create the interface:[eth3][eth3.0][0]. be ready to get the interface:[eth3.0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: eth3.0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. JON: rut_initHguAddLan2Bridge...., vif_name is: eth3.0 JON: nrut_initHguAddLan2Bridge.... - not adding eth3.0 to bridge [12-31 22:00:30][OMCI]special_process_depended_board: call swdl_commit. deal with the cmd's result:[0]. Sorry, rule does not exist. Sorry, rule does not exist. sh: /sbin/qtn_upgrade_cli: not found [12-31 22:00:30][OMCI]OMCI_LIB: Got swImageInfo = b, standby = 1 [12-31 22:00:30][OMCI]OMCI_LIB: Got swImageInfo = 0, standby = 3 [12-31 22:00:30][OMCI]OMCI_LIB: Got swImageInfo = 0, standby = 5 get slid pwd: 44454641554c54000000 setOmciIK pwd: len=36 44 45 46 41 55 4c 54 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 setOmciIK sn: len=8 41 4c 43 4c fb df 5d 17 Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. sed: /etc/dhcpsnoop.conf: No such file or directory sed: /etc/dhcpsnoop.conf: No such file or directory [ndbus][dbus][2112: 0xb6f9b000][31.242379][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadHostsCache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [startup] cfgmgr insertModuleInfo insmod: can't read '/lib/modules/4.1.45/xt_limit.ko': No such file or directory [startup] cfgmgr insertModuleInfo done [startup] cfgmgr rut_setupFireWallChain [startup] iptables-restore: [SETUP_CHAIN] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_1 [Minging]remove /tmp/iptablesV4_2267_1 [iptables-restore] restore /tmp/iptablesV4_2267_1(63 entries) took 0.40s, totalCmd took 0.58. [startup] cfgmgr rut_setupIpv4DosProtection [startup] iptables-restore: [DOS_PROT_TCP] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_2 [Minging]remove /tmp/iptablesV4_2267_2 [iptables-restore] restore /tmp/iptablesV4_2267_2(6 entries) took 0.293s, totalCmd took 0.351. [startup] iptables-restore: [SUB_DOS_PROT] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_3 [Minging]remove /tmp/iptablesV4_2267_3 wl: Not up sh: -60: unknown operand [iptables-restore] restore /tmp/iptablesV4_2267_3(15 entries) took 0.39s, totalCmd took 0.390. [startup] iptables-restore: [SUB_DOS_PROT] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_4 [Minging]remove /tmp/iptablesV4_2267_4 [iptables-restore] restore /tmp/iptablesV4_2267_4(7 entries) took 0.39s, totalCmd took 0.429. iptables v1.4.16.3: Couldn't find match `unclean' Try `iptables -h' or 'iptables --help' for more information. [startup] cfgmgr rut_setupIpv4DosProtection done [Minging]remove /tmp/iptablesV6_2267_1 [iptables-restore-v6] restore /tmp/iptablesV6_2267_1(77 entries) took 0.143s, totalCmd took 0.784. [startup] cfgmgr rut_setupFireWallChain done iptables: No chain/target/match by that name. [startup] iptables-restore: [NAT] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_5 [Minging]remove /tmp/iptablesV4_2267_5 [iptables-restore] restore /tmp/iptablesV4_2267_5(28 entries) took 0.34s, totalCmd took 1.51. [startup] cfgmgr rut_InitIptablesNat done [startup] cfgmgr rut_setupFixedHostServiceRulesForFilter UserAgentPort=5060 liuchi localPortMin=22456 localPortMax=22584 liuchi [startup] iptables-restore: [FWLEVEL] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_6 [Minging]remove /tmp/iptablesV4_2267_6 [iptables-restore] restore /tmp/iptablesV4_2267_6(44 entries) took 0.79s, totalCmd took 1.272. [Minging]remove /tmp/iptablesV6_2267_2 [iptables-restore-v6] restore /tmp/iptablesV6_2267_2(50 entries) took 0.144s, totalCmd took 1.416. [startup] cfgmgr rut_setupFixedHostServiceRulesForFilter done (non VFSP) Function rutIpt_portalLoidWeb() is calledDHCPDRV Entering Callback function!!! [Dec 31 22:00:32] radvd: version 1.6 started [Dec 31 22:00:32] radvd: interface br0 is not RUNNING [Dec 31 22:00:32] radvd: interface br0 does not exist [Dec 31 22:00:32] radvd: error parsing or activating the config file: /etc/radvd.conf iptables v1.4.16.3: Couldn't find match `conntract' Try `iptables -h' or 'iptables --help' for more information. ip6tables v1.4.16.3: Couldn't find match `conntract' Try `ip6tables -h' or 'ip6tables --help' for more information. iptables v1.4.16.3: Couldn't find match `conntract' Try `iptables -h' or 'iptables --help' for more information. ip6tables v1.4.16.3: Couldn't find match `conntract' Try `ip6tables -h' or 'ip6tables --help' for more information. be ready to set the WorkMode:[RGW][]. [startup stage1_boot 13/78] <- cfgmgr cfg_bootHguLan [5312ms] [startup stage1_boot 14/78] -> cfgmgr cfg_bootWan enter rgw_processWanChangeSignal with buf=0x92bc64 size=912 RPRT wapp_sendWanInfoToWand opcode=1 RPRT rut_addXCTCOMNameChange wanObj=0xbed0fc34 RPRT rutLan_addDdnsInstance connType=ip RPRT rutWan_SetRemoteSftp isInternetWan=1 Obj=0xbed0fc34 newConn=1 RPRT rts_WanIpConnObject exit currObj=(nil) newObj=0xbed0fc34 flag=0x0 enter rgw_processWanChangeSignal with buf=0x92c1d4 size=912 RPRT wapp_sendWanInfoToWand opcode=1 RPRT rut_addXCTCOMNameChange wanObj=0xbed0fc34 RPRT rutLan_addDdnsInstance connType=ip RPRT rts_WanIpConnObject exit currObj=(nil) newObj=0xbed0fc34 flag=0x0 [startup stage1_boot 14/78] <- cfgmgr cfg_bootWan [1175ms] [startup stage1_boot 15/78] -> cfgmgr cfg_bootDnsProxy [ndbus][dbus][2112: 0xb6f9b000][34.989994][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [ndbus][dbus][2112: 0xb6f9b000][34.999949][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [ndbus][dbus][2112: 0xb6f9b000][35.011086][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [ndbus][dbus][2112: 0xb6f9b000][35.021543][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [ndbus][dbus][2112: 0xb6f9b000][35.031376][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [ndbus][dbus][2112: 0xb6f9b000][35.041953][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [ndbus][dbus][2112: 0xb6f9b000][35.052277][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [ndbus][dbus][2112: 0xb6f9b000][35.063285][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnspigmpdrv k_igmp_ioctl_set_port_type:571 Eth_1 port_type =1 igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type igmpbl hal_kernel_create_vlan_entry_id:1683 WDS_1 create entryId(4294967295) begin! igmpbl hal_kernel_create_vlan_entry_id:1688 WDS_1 create entryId(0) successfully! igmpbl hal_kernel_create_vlan_entry_id:1677 WDS_2 find shared entryId(0)! igmpbl hal_kernel_create_vlan_entry_id:1677 WDS_3 find shared entryId(0)! igmpbl hal_kernel_create_vlan_entry_id:1677 WDS_4 find shared entryId(0)! igmpbl hal_kernel_create_vlan_entry_id:1683 Eth_1 create entryId(4294967295) begin! igmpbl hal_kernel_create_vlan_entry_id:1688 Eth_1 create entryId(1) successfully! roxy was not igmpdrv k_igmp_ioctl_set_port_type:571 Eth_2 port_type =0 igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type igmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. igmpbl hal_kernel_create_vlan_entry_id:1683 Eth_2 create entryId(4294967295) begin! provided by aigmpbl hal_kernel_create_vlan_entry_id:1688 Eth_2 create entryId(2) successfully! ny .service figmpdrv k_igmp_ioctl_set_port_type:571 Eth_3 port_type =1 igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type igmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. iles [ndbus]igmpbl hal_kernel_create_vlan_entry_id:1683 Eth_3 create entryId(4294967295) begin! [dbus][2112: igmpbl hal_kernel_create_vlan_entry_id:1688 Eth_3 create entryId(3) successfully! 0xb6f9b000][3igmpdrv k_igmp_ioctl_set_port_type:571 Eth_4 port_type =1 igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type igmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. 5.074833][fa]igmpbl hal_kernel_create_vlan_entry_id:1683 Eth_4 create entryId(4294967295) begin! [rgwd][ndbusTigmpbl hal_kernel_create_vlan_entry_id:1688 Eth_4 create entryId(4) successfully! ransmit:104]aigmpdrv k_igmp_ioctl_set_port_type:571 Wifi_1 port_type =1 igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type igmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. n error occurigmpbl hal_kernel_create_vlan_entry_id:1683 Wifi_1 create entryId(4294967295) begin! igmpbl hal_kernel_create_vlan_entry_id:1688 Wifi_1 create entryId(5) successfully! red on (0x928igmpdrv k_igmp_ioctl_set_port_type:571 Wifi_2 port_type =1 968) when nokigmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type igmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. ia.ndk.dnsproigmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_2 find shared entryId(5)! xy.itf.api:Loigmpdrv k_igmp_ioctl_set_port_type:571 Wifi_3 port_type =1 igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type igmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. adD2Acache, migmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_3 find shared entryId(5)! s=5000 : The igmpdrv k_igmp_ioctl_set_port_type:571 Wifi_4 port_type =1 igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type igmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. name nokia.ndigmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_4 find shared entryId(5)! k.dnsproxy waigmpdrv k_igmp_ioctl_set_port_type:571 Wifi_5 port_type =1 igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type igmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. s not provideigmpbl hal_kernel_create_vlan_entry_id:1683 Wifi_5 create entryId(4294967295) begin! d by any .serigmpbl hal_kernel_create_vlan_entry_id:1688 Wifi_5 create entryId(6) successfully! vice files [igmpdrv k_igmp_ioctl_set_port_type:571 Wifi_6 port_type =1 ndbus][dbus][igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type 2112: 0xb6f9bigmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. igmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_6 find shared entryId(6)! 000][35.08573igmpdrv k_igmp_ioctl_set_port_type:571 Wifi_7 port_type =1 igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type igmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. 7][fa][rgwd][igmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_7 find shared entryId(6)! ndbusTransmitigmpdrv k_igmp_ioctl_set_port_type:571 Wifi_8 port_type =1 igmpapi IgmpApiSetPortType:1644 Set WIFI backhual ports type :104]an errorigmpapi IgmpSetWifiBackhaulConfigration:1566 Regist LogPort(WDS_1) exist and bypass the following setting. occurred on igmpbl hal_kernel_create_vlan_entry_id:1677 Wifi_8 find shared entryId(6)! (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [ndbus][dbus][2112: 0xb6f9b000][35.097224][fa][rgwd][ndbusTransmit:104]an error occurred on (0x928968) when nokia.ndk.dnsproxy.itf.api:LoadD2Acache, ms=5000 : The name nokia.ndk.dnsproxy was not provided by any .service files [startup stage1_boot 15/78] <- cfgmgr cfg_bootDnsProxy [169ms] [startup stage1_boot 16/78] -> cfgmgr cfg_bootIGMP igmpIntLanPortType begin! igmpIntLanPortType isSupportLan(1), lanPortNum(4)! igmpIsLanHguPort: lanIndex(0), isHguType(1) getSharedMemory failed igmpInitLanPortType: set portClass(0), userPort(1), portType(1) igmpIsLanHguPort: lanIndex(1), isHguType(0) dnsproxy is started with pid=2975 igmpInitLanPortType: set portClass(0), userPort(2), portType(0) igmpIsLanHguPort: lanIndex(2), isHguType(1) igmpInitLanPortType: set portClass(0), userPort(3), portType(1) igmpIsLanHguPort: lanIndex(3), isHguType(1) [ndbus][dbus][2975: 0xb6fadc20][35.291022][wa][dnsproxy][ndbusMainLoop:555]Main thread errno address:0xb6fae0f0 [ndbus][dbus][2975: 0xb6836450][35.308049][wa][dnsproxy][thread_entry:463]Child thread errno address:0xb6836920 igmpInitLanPortType: set portClass(0), userPort(4), portType(1) igmpInitWifiPortType begin igmpInitWifiPort isQtnWifiFlag(0), user_port(1) port_domain(HGU) igmpInitWifiPort isQtnWifiFlag(0), user_port(2) port_domain(HGU) igmpInitWifiPort isQtnWifiFlag(0), user_port(3) port_domain(HGU) igmpInitWifiPort isQtnWifiFlag(0), user_port(4) port_domain(HGU) igmpInitWifiPort isQtnWifiFlag(0), user_port(5) port_domain(HGU) igmpInitWifiPort isQtnWifiFlag(0), user_port(6) port_domain(HGU) igmpInitWifiPort isQtnWifiFlag(0), user_port(7) port_domain(HGU) igmpInitWifiPort isQtnWifiFlag(0), user_port(8) port_domain(HGU) rutIgmp_init() rutMld_startMldProxy rutMld_stopMldProxy killall: mld: no process killed No need to set wan info, wanIfName= [startup stage1_boot 16/78] <- cfgmgr cfg_bootIGMP [509ms] [startup on_idle 18/78] -> cfgmgr cfg_bootXptablesRule [startup] cfgmgr insertModuleInfo insmod: can't read '/lib/modules/4.1.45/xt_limit.ko': No such file or directory [startup] cfgmgr insertModuleInfo done [startup] cfgmgr rut_setupDropAckRule [startup] iptables-restore: [DROP_ACK] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_7 [Minging]remove /tmp/iptablesV4_2267_7 set obc limitation successful[iptables-restore] restore /tmp/iptablesV4_2267_7(20 entries) took 0.38s, totalCmd took 2.692. [startup] cfgmgr rut_setupDropAckRule done [startup] cfgmgr rutIpt_initIpFilterOutChain [startup] iptables-restore: [IP_FILTER] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_8 [Minging]remove /tmp/iptablesV4_2267_8 [iptables-restore] restore /tmp/iptablesV4_2267_8(25 entries) took 0.35s, totalCmd took 2.913. [startup] cfgmgr rutIpt_initIpFilterOutChain done [startup on_idle 18/78] <- cfgmgr cfg_bootXptablesRule [637ms] set InternetGatewayDevice.WANDevice.1.X_CT-COM_GponInterfaceConfig.RXPowerUpper=<-7> success! UplinkMgrCfg: WorkMode: 0 DetectMethod: 0 VFSPUplinkMgrTrack: Interval: 5 DataBackupMode: 0 SwitchToMobileFlag: 0 MobileDisconnectIdleTime: 600 IsActiveLanHostAvailable_m: 0 ICMPQueryInterval: 4 Gateway: DNSQueryInterval: 4 DNSQueryUrl: DataWanToMobileDelayTime: 0 DataMobileToWanDelayTime: 0 [1970-01-01 00:00:36]MSG: cfgmgr is working well [ndbus][dbus][2375: 0xb6fce980][36.339611][wa][uplinkmgr][ndbusMainLoop:555]Main thread errno address:0xb6fcee64 [ndbus][dbus][2375: 0xb526c450][36.342514][wa][uplinkmgr][thread_entry:463]Child thread errno address:0xb526c934 set InternetGatewayDevice.WANDevice.1.X_CT-COM_GponInterfaceConfig.RXPowerUpperDec=<0> success! set InternetGatewayDevice.WANDevice.1.X_CT-COM_GponInterfaceConfig.RXPowerLower=<-27> success! set InternetGatewayDevice.WANDevice.1.X_CT-COM_GponInterfaceConfig.RXPowerLowerDec=<-95> success! the ontServiceTypeLen:[3]. for Func:[hal_setWanInterfaceFilter],get the serviceType:[HGU] success. The ONT Operation_Id is not SFU, needn't control wan0's ratelimit. the ontServiceTypeLen:[3]. for Func:[hal_setWanInterfaceFilter],get the serviceType:[HGU] success. The ONT Operation_Id is not SFU, needn't control wan0's ratelimit. the ontServiceTypeLen:[3]. for Func:[hal_setWanInterfaceFilter],get the serviceType:[HGU] success. The ONT Operation_Id is not SFU, needn't control wan0's ratelimit. the ontServiceTypeLen:[3]. for Func:[hal_setWanInterfaceFilter],get the serviceType:[HGU] success. The ONT Operation_Id is not SFU, needn't control wan0's ratelimit. [12-31 22:00:36][OMCI]configUniAction(portId=e01,tag=2) stream_ptr is NULL [12-31 22:00:36][OMCI]configUniAction(portId=e01,tag=2) stream_ptr is NULL OG_DRV_IOC_IOCTL failed, cmd:60 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:60 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:60 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:60 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:60 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:60 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:60 hal_bcm_send_ioctl_cmd :: ioctl failed. OG_DRV_IOC_IOCTL failed, cmd:60 hal_bcm_send_ioctl_cmd :: ioctl failed. the ontServiceTypeLen:[0]. be ready to ready to read ontServiceType from file:[/configs/ont_service_type]. the current ontServiceType:[HGU]. for Func:[hal_eth_set_ont_aggregation_mode],get the serviceType:[HGU] success. The ONT Operation_Id is not SFU, not need enable/disable mac learning WARNING: insmod usbserial.ko WARNING: insmod usb_wwan.ko WARNING: insmod option.ko [1970-01-01 00:00:36]MSG: tigger /usr/exe/socmonitor.as ... [1970-01-01 00:00:36]MSG: startupdone helper triggered [1970-01-01 00:00:36]MSG: SoC temperature is 50 @ 1969-12-31 22:00:36 [startup on_idle 19/78] -> cfgmgr cfg_bootSsh superd running time is 26. [startup on_idle 19/78] <- cfgmgr cfg_bootSsh [76ms] Starting Dropbear SSH server: dropbear. [startup on_idle 20/78] -> cfgmgr cfg_bootWlan cmd = wl -i wl0 channels cmd = wl -i wl0 channels cmd = wl -i wl1 channels create hide ssid Setting SSID: "HdTbB5+T" create hide ssid Setting SSID: "3Y8YwviN" be ready to create the interface:[wl0][wl0.v0][0]. be ready to get the interface:[wl0.v0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wl0.v0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. rut_initWLanBridge....... get_port_by_if_name:L464 is not an enet dev wl0 get_port_by_if_name:L464 is not an enet dev wl0 get_port_by_if_name:L464 is not an enet dev wl0 be ready to create the interface:[wl0.1][wl0.1.v0][0]. be ready to get the interface:[wl0.1.v0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wl0.1.v0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. rut_initWLanBridge....... get_port_by_if_name:L464 is not an enet dev wl0.1 get_port_by_if_name:L464 is not an enet dev wl0.1 get_port_by_if_name:L464 is not an enet dev wl0.1 be ready to create the interface:[wl0.2][wl0.2.v0][0]. be ready to get the interface:[wl0.2.v0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wl0.2.v0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. rut_initWLanBridge....... get_port_by_if_name:L464 is not an enet dev wl0.2 get_port_by_if_name:L464 is not an enet dev wl0.2 get_port_by_if_name:L464 is not an enet dev wl0.2 be ready to create the interface:[wl0.3][wl0.3.v0][0]. be ready to get the interface:[wl0.3.v0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wl0.3.v0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. rut_initWLanBridge....... get_port_by_if_name:L464 is not an enet dev wl0.3 get_port_by_if_name:L464 is not an enet dev wl0.3 get_port_by_if_name:L464 is not an enet dev wl0.3 be ready to create the interface:[wl0.4][wl0.4.v0][0]. be ready to get the interface:[wl0.4.v0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wl0.4.v0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. rut_initWLanBridge....... get_port_by_if_name:L464 is not an enet dev wl0.4 get_port_by_if_name:L464 is not an enet dev wl0.4 get_port_by_if_name:L464 is not an enet dev wl0.4 get_port_by_if_name:L464 is not an enet dev wl0.4 deal with the cmd's result:[0]. deal with the cmd's result:[0]. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. be ready to create the interface:[wl1][wl1.v0][0]. be ready to get the interface:[wl1.v0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wl1.v0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. rut_initWLanBridge....... get_port_by_if_name:L464 is not an enet dev wl1 get_port_by_if_name:L464 is not an enet dev wl1 get_port_by_if_name:L464 is not an enet dev wl1 be ready to create the interface:[wl1.1][wl1.1.v0][0]. be ready to get the interface:[wl1.1.v0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wl1.1.v0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. rut_initWLanBridge....... get_port_by_if_name:L464 is not an enet dev wl1.1 get_port_by_if_name:L464 is not an enet dev wl1.1 get_port_by_if_name:L464 is not an enet dev wl1.1 be ready to create the interface:[wl1.2][wl1.2.v0][0]. be ready to get the interface:[wl1.2.v0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wl1.2.v0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. rut_initWLanBridge....... nr_commands=17,max_links=200 get_port_by_if_name:L464 is not an enet dev wl1.2 get_port_by_if_name:L464 is not an enet dev wl1.2 get_port_by_if_name:L464 is not an enet dev wl1.2 be ready to create the interface:[wl1.3][wl1.3.v0][0]. be ready to get the interface:[wl1.3.v0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wl1.3.v0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. rut_initWLanBridge....... get_port_by_if_name:L464 is not an enet dev wl1.3 get_port_by_if_name:L464 is not an enet dev wl1.3 get_port_by_if_name:L464 is not an enet dev wl1.3 get_port_by_if_name:L464 is not an enet dev wl1 get_port_by_if_name:L464 is not an enet dev wl1.1 get_port_by_if_name:L464 is not an enet dev wl1.2 get_port_by_if_name:L464 is not an enet dev wl1.3 be ready to create the interface:[wl1.4][wl1.4.v0][0]. be ready to get the interface:[wl1.4.v0],wanNum:[0]'s macAddr. [MAC_ASSIGN]get_assigned_mac name: wl1.4.v0 is not wan conn [MAC_ASSIGN]new if, will assign mac by vlanctl. rut_initWLanBridge....... get_port_by_if_name:L464 is not an enet dev wl1.4 get_port_by_if_name:L464 is not an enet dev wl1.4 get_port_by_if_name:L464 is not an enet dev wl1.4 deal with the cmd's result:[0]. deal with the cmd's result:[0]. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. sh: /sbin/wslmgr: not found [startup on_idle 20/78] <- cfgmgr cfg_bootWlan [4111ms] [get_region] Region Code: br @ CTY br get_port_by_if_name:L464 is not an enet dev wl0 get_port_by_if_name:L464 is not an enet dev wl0.1 wl: Not up sh: -60: unknown operand get_port_by_if_name:L464 is not an enet dev wl0.2 get_port_by_if_name:L464 is not an enet dev wl0.3 get_port_by_if_name:L464 is not an enet dev wl1 get_port_by_if_name:L464 is not an enet dev wl1 [startup on_idle 21/78] -> cfgmgr cfg_bootSetNumEntry [startup on_idle 21/78] <- cfgmgr cfg_bootSetNumEntry [26ms] get_port_by_if_name:L464 is not an enet dev wl1 [startup on_idle 22/78] -> cfgmgr cfg_bootLanPort phy_set_EthMode: pid=2267 ppid=1 phyid=0 speed=4 mode=3 status=0 ethmode=0x0 phy_hal_set_mode: pid=2267 ppid=1 phyid=0 mode=0x0 phy_set_EthMode: pid=2267 ppid=1 phyid=0 speed=3 mode=2 status=0 ethmode=0x1FF0A phy_hal_set_mode: pid=2267 ppid=1 phyid=0 mode=0x1FF0A phy_set_EthMode: pid=2267 ppid=1 phyid=2 speed=4 mode=3 status=0 ethmode=0x0 phy_hal_set_mode: pid=2267 ppid=1 phyid=2 mode=0x0 get_port_by_if_name:L464 is not an enet dev wl0 get_port_by_if_name:L464 is not an enet dev wl0 phy_set_EthMode: pid=2267 ppid=1 phyid=2 speed=3 mode=2 status=0 ethmode=0x1FF0A phy_hal_set_mode: pid=2267 ppid=1 phyid=2 mode=0x1FF0A phy_set_EthMode: pid=2267 ppid=1 phyid=3 speed=4 mode=3 status=0 ethmode=0x0 phy_hal_set_mode: pid=2267 ppid=1 phyid=3 mode=0x0 phy_set_EthMode: pid=2267 ppid=1 phyid=3 speed=3 mode=2 status=0 ethmode=0x1FF0A phy_hal_set_mode: pid=2267 ppid=1 phyid=3 mode=0x1FF0A [startup on_idle 22/78] <- cfgmgr cfg_bootLanPort [115ms] [startup on_idle 23/78] -> cfgmgr cfg_bootPowerManagement [startup on_idle 23/78] <- cfgmgr cfg_bootPowerManagement [0ms] Chanspec set to 0x1001 wl: Not In Range AI CLI*3760> Wed Dec 31 22:00:43 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine AI CLI*3812> Wed Dec 31 22:00:43 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine Setting SSID: "ALHN-XXXX" [startup on_idle 24/78] -> cfgmgr cfg_bootLanLoopbackDet enter hal_lpd_init Cann't open file hal_lpd_init failed enter hal_lpd_set_port_info enter hal_lpd_set_port_info enter hal_lpd_set_port_info enter hal_lpd_set_port_info [startup on_idle 24/78] <- cfgmgr cfg_bootLanLoopbackDet [204ms] [startup on_idle 25/78] -> cfgmgr cfg_bootLTEMgr [startup on_idle 25/78] <- cfgmgr cfg_bootLTEMgr [2ms] get_port_by_if_name:L464 is not an enet dev wl1 get_port_by_if_name:L464 is not an enet dev wl1 [startup on_idle 26/78] -> cfgmgr cfg_bootLog stopping syslog klogd syslogd rsyslogd Chanspec set to 0xe02a Chanspec set to 0xe02a AI CLI*3995> Wed Dec 31 22:00:44 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine restarting syslog wl: Unsupported mkfifo: /tmp/event_messages: File exists rsyslog start TZ ev /etc/localtime Generating rsyslog.conf rsyslogd starting wl: Not In Range [startup on_idle 26/78] <- cfgmgr cfg_bootLog [319ms] AI CLI*4063> Wed Dec 31 22:00:45 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine Setting SSID: "ALHN-XXXX" [startup on_idle 27/78] -> cfgmgr cfg_bootWanLanAccess [startup] iptables-restore: [IPFILTER] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_9 [Minging]remove /tmp/iptablesV4_2267_9 [iptables-restore] restore /tmp/iptablesV4_2267_9(8 entries) took 0.63s, totalCmd took 3.35. [Minging]remove /tmp/iptablesV6_2267_3 [iptables-restore-v6] restore /tmp/iptablesV6_2267_3(7 entries) took 0.142s, totalCmd took 3.177. conntrack v1.4.1 (conntrack-tools): 0 flow entries have been deleted. [startup] iptables-restore: [LAN_ACCESS] xtables-multi iptables-restore -n /tmp/iptablesV4_2267_10 [Minging]remove /tmp/iptablesV4_2267_10 [iptables-restore] restore /tmp/iptablesV4_2267_10(7 entries) took 0.71s, totalCmd took 3.272. [Minging]remove /tmp/iptablesV6_2267_4 [iptables-restore-v6] restore /tmp/iptablesV6_2267_4(6 entries) took 0.112s, totalCmd took 3.384. [startup on_idle 27/78] <- cfgmgr cfg_bootWanLanAccess [313ms] config hide ssid 72:D9:AE:XX:XX:XX get_port_by_if_name:L464 is not an enet dev wl1.4 /usr/exe/mesh_wds_hidessid.sh: line 140: dhd: not found [startup on_idle 29/78] -> cfgmgr cfg_bootDCMgr [startup on_idle 29/78] <- cfgmgr cfg_bootDCMgr [0ms] get_port_by_if_name:L464 is not an enet dev wl1.4 get_port_by_if_name:L464 is not an enet dev wl1.4 Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. Sorry, rule does not exist. config hide ssid 6A:D9:AE:XX:XX:XX /usr/exe/mesh_wds_hidessid.sh: line 140: dhd: not found get_port_by_if_name:L464 is not an enet dev wl0.4 get_port_by_if_name:L464 is not an enet dev wl0.4 [startup on_idle 30/78] -> cfgmgr cfg_bootArpWan wanlived starting with pid 4331 wand starting ... interval = 60 net.ipv4.ping_group_range = 0 0 [startup on_idle 30/78] <- cfgmgr cfg_bootArpWan [119ms] led_mode=0 is_intercept_enabled=0 add new wan info 10101,interface=pon_210_0_1,ip= add new wan info 10201,interface=pon_220_4_1,ip= [ndbus][dbus][4334: 0xb6f7b8a0][47.748509][wa][wanlived][ndbusMainLoop:555]Main thread errno address:0xb6f7bd70 [ndbus][dbus][4334: 0xb67f0450][47.751889][wa][wanlived][thread_entry:463]Child thread errno address:0xb67f0920 nas_nsb_log_init Setup RRB socket, interface name=br0 AI CLI*4351> Wed Dec 31 22:00:47 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine sh: syntax error: unterminated quoted string [startup on_idle 31/78] -> cfgmgr cfg_bootSched [startup on_idle 31/78] <- cfgmgr cfg_bootSched [24ms] sed: /var/spool/cron/crontabs/root: No such file or directory AI CLI*3760> Wed Dec 31 22:00:48 | INFO | aicli.c | send_msg:89 | timeout and retry #1 sed -i -e '/\/sbin\/wifi/d' -e '/accesspolicy/d' -e '/profilepolicy/d' /var/spool/cron/crontabs/root sed: /var/spool/cron/crontabs/ONTUSER: No such file or directory sed -i -e '/\/sbin\/wifi/d' -e '/accesspolicy/d' -e '/profilepolicy/d' /var/spool/cron/crontabs/ONTUSER sh: you need to specify whom to kill AI CLI*3812> Wed Dec 31 22:00:48 | INFO | aicli.c | send_msg:89 | timeout and retry #1 [startup on_idle 32/78] -> cfgmgr cfg_bootUrlfilter [startup on_idle 32/78] <- cfgmgr cfg_bootUrlfilter [29ms] igmpbl get_intf_by_dev_name: wl1.4.v0 failed. igmpbl get_roaming_update_info faild. igmpbl McastRoamingHandle faild. [startup on_idle 33/78] -> cfgmgr cfg_bootMWband [startup on_idle 33/78] <- cfgmgr cfg_bootMWband [13ms] igmpbl McastRoamingHandle faild. AI CLI*3995> Wed Dec 31 22:00:49 | INFO | aicli.c | send_msg:89 | timeout and retry #1 [startup on_idle 34/78] -> cfgmgr cfg_bootCTUPnP [startup on_idle 34/78] <- cfgmgr cfg_bootCTUPnP [0ms] AI CLI*4063> Wed Dec 31 22:00:50 | INFO | aicli.c | send_msg:89 | timeout and retry #1 [startup on_idle 35/78] -> cfgmgr cfg_bootMediaServe [startup on_idle 35/78] <- cfgmgr cfg_bootMediaServe [0ms] [startup on_idle 36/78] -> cfgmgr cfg_bootStunnel [startup on_idle 36/78] <- cfgmgr cfg_bootStunnel [58ms] set 24g phy_ed_thresh to -60 [startup on_idle 37/78] -> cfgmgr cfg_bootCopyCert [startup on_idle 37/78] <- cfgmgr cfg_bootCopyCert [0ms] [startup on_idle 38/78] -> cfgmgr cfg_bootUser [startup on_idle 38/78] <- cfgmgr cfg_bootUser [592ms] AI CLI*4351> Wed Dec 31 22:00:52 | INFO | aicli.c | send_msg:89 | timeout and retry #1 AI CLI*3760> Wed Dec 31 22:00:53 | INFO | aicli.c | send_msg:89 | timeout and retry #2 [startup on_idle 39/78] -> cfgmgr cfg_bootFtp killall: utelnetd: no process killed iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. iptables: No chain/target/match by that name. AI CLI*3812> Wed Dec 31 22:00:53 | INFO | aicli.c | send_msg:89 | timeout and retry #2 ip6tables: No chain/target/match by that name. telnetd: starting max_connection=8 port: 23; interface: any; login program: /bin/login killall: proftpd: no process killed [startup on_idle 39/78] <- cfgmgr cfg_bootFtp [435ms] [startup on_idle 40/78] -> cfgmgr cfg_bootNtp rm: can't remove '/configs/etc/TZ': No such file or directory rm: can't remove '/configs/etc/TZ': No such file or directory [startup on_idle 40/78] <- cfgmgr cfg_bootNtp [153ms] AI CLI*3995> Wed Dec 31 22:00:54 | INFO | aicli.c | send_msg:89 | timeout and retry #2 [startup on_idle 41/78] -> cfgmgr cfg_bootUsb [startup on_idle 41/78] <- cfgmgr cfg_bootUsb [0ms] AI CLI*4063> Wed Dec 31 22:00:55 | INFO | aicli.c | send_msg:89 | timeout and retry #2 [startup on_idle 42/78] -> cfgmgr cfg_bootstaticRoute [startup on_idle 42/78] <- cfgmgr cfg_bootstaticRoute [27ms] igmpbl McastRoamingHandle faild. [startup on_idle 43/78] -> cfgmgr cfg_bootMiniOLTTest Function rts_MinioltTestObject() is called [startup on_idle 43/78] <- cfgmgr cfg_bootMiniOLTTest [0ms] [startup on_idle 44/78] -> cfgmgr cfg_bootVPN [startup on_idle 44/78] <- cfgmgr cfg_bootVPN [0ms] [startup on_idle 45/78] -> cfgmgr cfg_bootRfVideo [startup on_idle 45/78] <- cfgmgr cfg_bootRfVideo [0ms] [startup on_idle 46/78] -> cfgmgr cfg_PowerLed [startup on_idle 46/78] <- cfgmgr cfg_PowerLed [0ms] get_port_by_if_name:L464 is not an enet dev wl0 AI CLI*4351> Wed Dec 31 22:00:57 | INFO | aicli.c | send_msg:89 | timeout and retry #2 [startup on_idle 47/78] -> cfgmgr cfg_bootTunnel [startup on_idle 47/78] <- cfgmgr cfg_bootTunnel [8ms] AI CLI*3760> Wed Dec 31 22:00:58 | INFO | aicli.c | send_msg:89 | timeout and retry #3 AI CLI*3812> Wed Dec 31 22:00:58 | INFO | aicli.c | send_msg:89 | timeout and retry #3 [startup on_idle 48/78] -> cfgmgr cfg_bootAlg [startup on_idle 48/78] <- cfgmgr cfg_bootAlg [446ms] get_port_by_if_name:L464 is not an enet dev wl1 [startup on_idle 49/78] -> cfgmgr cfg_bootBDEMgr [startup on_idle 49/78] <- cfgmgr cfg_bootBDEMgr [0ms] AI CLI*3995> Wed Dec 31 22:00:59 | INFO | aicli.c | send_msg:89 | timeout and retry #3 [startup on_idle 50/78] -> cfgmgr cfg_diagnostic AI CLI*4063> Wed Dec 31 22:01:00 | INFO | aicli.c | send_msg:89 | timeout and retry #3 killall: udpEchod: no process killed [startup on_idle 50/78] <- cfgmgr cfg_diagnostic [190ms] [startup on_idle 51/78] -> cfgmgr cfg_tracediag [startup on_idle 51/78] <- cfgmgr cfg_tracediag [4ms] get_port_by_if_name:L464 is not an enet dev wl1.4 [startup on_idle 52/78] -> cfgmgr cfg_auto_commit [startup on_idle 52/78] <- cfgmgr cfg_auto_commit [0ms] [startup on_idle 53/78] -> cfgmgr cfg_ippingdiag [startup on_idle 53/78] <- cfgmgr cfg_ippingdiag [4ms] get_port_by_if_name:L464 is not an enet dev wl0.4 [startup on_idle 54/78] -> cfgmgr cfg_bootSecurity [startup on_idle 54/78] <- cfgmgr cfg_bootSecurity [92ms] AI CLI*4351> Wed Dec 31 22:01:02 | INFO | aicli.c | send_msg:89 | timeout and retry #3 [startup on_idle 55/78] -> cfgmgr cfg_bootParentalCtl [startup on_idle 55/78] <- cfgmgr cfg_bootParentalCtl [0ms] AI CLI*3760> Wed Dec 31 22:01:03 | INFO | aicli.c | send_msg:89 | timeout and retry #4 AI CLI*3812> Wed Dec 31 22:01:03 | INFO | aicli.c | send_msg:89 | timeout and retry #4 [startup on_idle 56/78] -> cfgmgr cfg_bootMeshCtl iptables: Chain already exists. [startup on_idle 56/78] <- cfgmgr cfg_bootMeshCtl [106ms] script_backhaulselector: Enter startup backhaul selector script. Include adapt 2.4g/5g inteface version DDM pid's Count [1] DDM_MAIN initDdmDefaultConfig 23 initDdmDefaultConfig 29 initDdmDefaultConfig 31 [startup on_idle 57/78] -> cfgmgr cfg_WifiCtl initDdmDefaultConfig 67 initDdmDefaultConfig 70 initDdmDefaultConfig 72 initDdmDefaultConfig 74 initDdmDefaultConfig 76 initDdmDefaultConfig 86 initDdmDefaultConfig 95 initDdmDefaultConfig 97 initDdmDefaultConfig 99 initDdmDefaultConfig 101 initDdmDefaultConfig 104 initDdmDefaultConfig 106 reading config /configs/whw/ddm_config.cfg DDM_LOG sed: /etc/dhcpsnoop.conf: No such file or directory [startup on_idle 57/78] <- cfgmgr cfg_WifiCtl [42ms] [startup on_idle 58/78] -> cfgmgr cfg_bootUPnPCtrlPt [startup on_idle 58/78] <- cfgmgr cfg_bootUPnPCtrlPt [67ms] AI CLI*3995> Wed Dec 31 22:01:04 | INFO | aicli.c | send_msg:89 | timeout and retry #4 [startup on_idle 59/78] -> cfgmgr cfg_bootP2P [startup on_idle 59/78] <- cfgmgr cfg_bootP2P [0ms] AI CLI*4063> Wed Dec 31 22:01:05 | INFO | aicli.c | send_msg:89 | timeout and retry #4 [startup on_idle 60/78] -> cfgmgr cfg_bootTransceiver [startup on_idle 60/78] <- cfgmgr cfg_bootTransceiver [0ms] [startup on_idle 61/78] -> cfgmgr cfg_bootTempeSensor [startup on_idle 61/78] <- cfgmgr cfg_bootTempeSensor [0ms] [startup on_idle 62/78] -> cfgmgr cfg_WiFiUSBPwrMngt [startup on_idle 62/78] <- cfgmgr cfg_WiFiUSBPwrMngt [65ms] [startup on_idle 63/78] -> cfgmgr cfg_bootWDP [startup on_idle 63/78] <- cfgmgr cfg_bootWDP [0ms] AI CLI*4351> Wed Dec 31 22:01:07 | INFO | aicli.c | send_msg:89 | timeout and retry #4 [startup on_idle 64/78] -> cfgmgr cfg_bootxmpp [startup on_idle 64/78] <- cfgmgr cfg_bootxmpp [1ms] AI CLI*3760> Wed Dec 31 22:01:08 | INFO | aicli.c | send_msg:89 | timeout and retry #5 [startup on_idle 65/78] -> cfgmgr cfg_bootNSLookuUpDiagState [startup on_idle 65/78] <- cfgmgr cfg_bootNSLookuUpDiagState [15ms] AI CLI*3812> Wed Dec 31 22:01:08 | INFO | aicli.c | send_msg:89 | timeout and retry #5 [startup on_idle 66/78] -> cfgmgr cfg_bootForMiddleware mv: can't rename '/configs/udhcpd.leases2.bak': No such file or directory [startup on_idle 66/78] <- cfgmgr cfg_bootForMiddleware [27ms] sh: LD_LIBRARY_PATH: not found 29 Starting onboarding! start monitor_wds_link.sh! onboarding is started with pid=5038 cmd = wl -i wl0 channels cmd = wl -i wl0 channels cmd = wl -i wl1 channels wl: Unsupported [ndbus][dbus][5052: 0xb6f0a000][69.261787][wa][mc][ndbusMainLoop:555]Main thread errno address:0xb6f0a4e4 [ndbus][dbus][5052: 0xb69f8450][69.268329][wa][mc][thread_entry:463]Child thread errno address:0xb69f8934 AI Engine/Agent AI Engine loaded [startup on_idle 67/78] -> cfgmgr cfg_bootSwmgnt [startup on_idle 67/78] <- cfgmgr cfg_bootSwmgnt [1ms] Syncmgr last updated on 20181113 =======================BeaconRegisterDbFile========================= cat: can't open '/configs/auth_beacon': No such file or directory ========================ALL BEACON LIST======================== auth_status auth_mac wifi_2.4g_mac wifi_5g_mac eth_wan_mac channel_id wifi_2.4g_wds_mac wifi_5g_wds_mac vender OUI model sn swversion hwversion =======================root beacon========================= mac = 00:00:00:00:00:00, vender = , OUI = , model = , class = , sn = , swversion = , hwversion = , wifi2gMac = , wifi5gMac = , ethWanMac = , wifi2gWdsMac = , wifi5gWdsMac = cat: can't open '/configs/root_beacon': No such file or directory [ndbus][dbus][5093: 0xb6f7cd00][69.829534][wa][syncmgr][ndbusMainLoop:555]Main thread errno address:0xb6f7d1e4 [ndbus][dbus][5093: 0xb5f22450][69.833506][wa][syncmgr][thread_entry:463]Child thread errno address:0xb5f22934 AI CLI*3995> Wed Dec 31 22:01:09 | INFO | aicli.c | send_msg:89 | timeout and retry #5 [startup on_idle 68/78] -> cfgmgr cfg_bootWolan [startup on_idle 68/78] <- cfgmgr cfg_bootWolan [0ms] AI CLI*4063> Wed Dec 31 22:01:10 | INFO | aicli.c | send_msg:89 | timeout and retry #5 [startup on_idle 69/78] -> cfgmgr cfg_bootXlink [startup on_idle 69/78] <- cfgmgr cfg_bootXlink [0ms] cmd = wl -i wl0 channels cmd = wl -i wl1 channels cmd = wl -i wl0 channels [ndbus][dbus][5088: 0xb6fdb000][70.693725][wa][backgroundscan][ndbusMainLoop:555]Main thread errno address:0xb6fdb4ec [ndbus][dbus][5088: 0xb4eff450][70.700080][wa][backgroundscan][thread_entry:463]Child thread errno address:0xb4eff93c wl: Unsupported [startup on_idle 70/78] -> cfgmgr cfg_bootCarrLock iptables: No chain/target/match by that name. iptables v1.4.16.3: Couldn't find target `LOCKCARRIER' Try `iptables -h' or 'iptables --help' for more information. iptables: No chain/target/match by that name. ip6tables: No chain/target/match by that name. ip6tables v1.4.16.3: Couldn't find target `LOCKCARRIER' Try `ip6tables -h' or 'ip6tables --help' for more information. ip6tables: No chain/target/match by that name. Sorry, rule does not exist. Sorry, rule does not exist. AI Engine localsocket fd 5 Sorry, rule does not exist. [startup on_idle 70/78] <- cfgmgr cfg_bootCarrLock [247ms] [ndbus][dbus][5082: 0xb6f28000][71.298722][wa][ai-engine][ndbusMainLoop:555]Main thread errno address:0xb6f284d0 [ndbus][dbus][5082: 0xb6acf470][71.302117][wa][ai-engine][thread_entry:463]Child thread errno address:0xb6acf940 [startup on_idle 71/78] -> cfgmgr cfg_bootOtaSwAgent [startup on_idle 71/78] <- cfgmgr cfg_bootOtaSwAgent [0ms] [startup on_idle 72/78] -> cfgmgr cfg_bootHostInfo lhInputParametersCheck, 2.4g ifname[wl0] 5g ifname[wl1] lanhostd is running, debug level: 2, arp interval: 5, expire: 0 led_mode=0, ipv6:1 [startup on_idle 72/78] <- cfgmgr cfg_bootHostInfo [50ms] 5g wifi MAC address = 00:26:86:00:00:00 Lanhostd init get Uniumd listen port=50090,addr=127.0.0.1 send_value_change_message_to_tr069(action=3,oid=255,size=1432) exit create netlink socket fail : Protocol not supported Failed to open netlink socket bridge ip: 192.168.1.254/netmask=ffffff, hw_addr: dc:d9:ae:xx:xx:xx Reading ARP table [ndbus][dbus][5453: 0xb6fe4210][72.566687][wa][lanhostd][ndbusMainLoop:555]Main thread errno address:0xb6fe46e0 [ndbus][dbus][5453: 0xb69a6470][72.568641][wa][lanhostd][thread_entry:463]Child thread errno address:0xb69a6940 [startup on_idle 73/78] -> cfgmgr cfg_bootUploadLogs Function stl_LogServerObject() is called [startup on_idle 73/78] <- cfgmgr cfg_bootUploadLogs [14ms] AI CLI*4351> Wed Dec 31 22:01:12 | INFO | aicli.c | send_msg:89 | timeout and retry #5 AI CLI*3760> Wed Dec 31 22:01:13 | INFO | aicli.c | send_msg:89 | timeout and retry #6 [startup on_idle 74/78] -> cfgmgr cfg_bootBufferBloatEffectFlag [startup on_idle 74/78] <- cfgmgr cfg_bootBufferBloatEffectFlag [2ms] AI CLI*5464> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine AI CLI*3812> Wed Dec 31 22:01:13 | INFO | aicli.c | send_msg:89 | timeout and retry #6 AI CLI*5470> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine AI CLI*5474> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine AI CLI*5478> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine rm: can't remove '/tmp/zero_waiting': No such file or directory AI CLI*5484> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine AI CLI*5488> Wed Dec 31 22:01:13 | INFO | aicli.c | main:227 | Sending Msg Type 2 to AI Engine [startup on_idle 75/78] -> cfgmgr cfg_bootFwAgent [startup on_idle 75/78] <- cfgmgr cfg_bootFwAgent [0ms] Controller [startup on_idle 76/78] -> cfgmgr cfg_bootSrmf [startup on_idle 76/78] <- cfgmgr cfg_bootSrmf [0ms] mac = DC:D9:AE:XX:XX:XX, vender = NOKIA, OUI = 98865D, model = G-140W-H, class = G-140W-H, sn = ALCLXXXXXXXX, swversion = 3FE48077CGCB30, hwversion = 3FE48054BDAA, wifi2gMac = DC:D9:AE:XX:XX:XX, wifi5gMac = DC:D9:AE:XX:XX:XX, ethWanMac = DC:D9:AE:XX:XX:XX, wifi2gWdsMac = 6A:D9:AE:XX:XX:XX, wifi5gWdsMac = 72:D9:AE:XX:XX:XX mac = DC:D9:AE:XX:XX:XX, vender = NOKIA, OUI = 98865D, model = G-140W-H, class = G-140W-H, sn = ALCLXXXXXXXX, swversion = 3FE48077CGCB30, hwversion = 3FE48054BDAA, wifi2gMac = DC:D9:AE:XX:XX:XX, wifi5gMac = DC:D9:AE:XX:XX:XX, ethWanMac = DC:D9:AE:XX:XX:XX, wifi2gWdsMac = 6A:D9:AE:XX:XX:XX, wifi5gWdsMac = 72:D9:AE:XX:XX:XX killall: smart_link: no process killed no EthWan for this board EthManageItf::getInstance: without switch. SAL: sal_getPhyState get_Ethode = -1 [ndbus][dbus][5038: 0xb6f59d10][74.724978][wa][onboarding][ndbusMainLoop:555]Main thread errno address:0xb6f5a1f4 [ndbus][dbus][5038: 0xb68bf450][74.731199][wa][onboarding][thread_entry:463]Child thread errno address:0xb68bf934 work mode = 3 optopt + smart link init start cmd = wl -i wl0 channels cmd = wl -i wl0 channels cmd = wl -i wl1 channels 2.4G interface: wl0 5G interface: wl1 wl driver fd = 4 wl_driver_init done smart link msg init start smart link msg init done zero touch init start uniumd listen port=50090 listen addr=127.0.0.1OUI:[88:B3:62] oui = 88:B3:62 hex oui = 88:b3:62 zt_get_group_id sl_get_parameter_value: get parameter value: InternetGatewayDevice.X_ALU-COM_BeaconInfo.GroupID sl_get_parameter_value: get parameter value ok : fbdf5d17 cmd = ritool dump|grep "G984Serial"|awk '{sub(/G984Serial:/,"",$2);print $2}' cmd = ritool dump|grep "OperatorID"|awk '{sub(/OperatorID:/,"",$2);print $2}' total support sn number: 0 zero touch init done [startup on_idle 77/78] -> cfgmgr cfg_bootSpeedTest [startup on_idle 77/78] <- cfgmgr cfg_bootSpeedTest [0ms] [ndbus][dbus][5501: 0xb6f26c60][74.884610][wa][smart_link][ndbusMainLoop:555]Main thread errno address:0xb6f27130 [ndbus][dbus][5501: 0xb6791450][74.885984][wa][smart_link][thread_entry:463]Child thread errno address:0xb6791920 AI CLI*3995> Wed Dec 31 22:01:14 | INFO | aicli.c | send_msg:89 | timeout and retry #6 AI CLI*4063> Wed Dec 31 22:01:15 | INFO | aicli.c | send_msg:89 | timeout and retry #6 AI CLI*4063> Wed Dec 31 22:01:15 | INFO | aicli.c | send_msg:112 | acsenable sh: missing ] [ndbus][dbus][5081: 0xb6f8f8d0][80.625858][wa][ai-agent][ndbusMainLoop:555]Main thread errno address:0xb6f8fda0 [ndbus][dbus][5081: 0xb6be6470][80.630539][wa][ai-agent][thread_entry:463]Child thread errno address:0xb6be6940 wl: Unsupported wl: Unsupported Tunnel Manager started..! pid = 6661 pid = 0 ERR hal_hgu_qos_init:Entering Function ERR: bdmf_configure#1530: ip_class: status:Error in parameters. config:l4_filter[gre]={action=host,protocol=0x2f} Object configuration failed: Error in parameters MON: Bdmf/Configure> failed with error code Error in parameters(-1) killall: dhcpsnoop: no process killed Wifi Info query received by cs manager...!! INFO: clean boot fail counter done wl: Unsupported In uniumd.init, WORK_MODE=RGW, WORK_ROLE=Controller probe response blocking feature was disabled, using hw probe response ! enet_stop:L667 eth0: stopped enet_stop:L667 eth1: stopped enet_stop:L667 eth2: stopped enet_stop:L667 eth3: stopped [FC_FLUSH]br_setport fcache_flush_by_if eth0.0 [FC_FLUSH]br_setport fcache_flush_by_if eth2.0 [FC_FLUSH]br_setport fcache_flush_by_if eth3.0 chmod: /tmp/.meshGwInfo.txt: No such file or directory enet_open:L634 eth0: opened enet_open:L634 eth1: opened enet_open:L634 eth2: opened [ndbus][dbus][4991: 0xb61fb000][98.646554][fa][ddm][ndbusTransmit:104]an error occurred on (0x17c1278) when nokia.swmgnt:getAllBeenet_open:L634 eth3: opened acons, ms=5000 : The name nokia.swmgnt was not provided by any .service files Root Node IP[192.168.1.254] chmod: /tmp/.meshinfo: No such file or directory DDM_NAL DDM INIT1 DDM_INIT Establishing handler for signal 34 json_object_from_file: error opening file /flash/device_threshold.json: No such file or directory DDM_DBUS DDM_QUEUE DDM_THREADS meshctl -> meshcomm binary startedmeshcomm arg count : 9 Writing in meshcomm config MODE=R INTF=br0 IP_ADDR=192.168.1.254 PORT=10025 Written in meshcomm config meshctl_startMeshComm 370 meshctl_startMeshComm 372 meshctl_startMeshComm 374 meshctl_startMeshComm 376 meshctl_startMeshComm 378 meshcomm started [ndbus][dbus][4991: 0xb61cd440][99.197174][wa][ddm][ndbusMainLoop:555]Main thread errno address:0xb61cd918 [ndbus][dbus][4991: 0xb0bff440][99.198644][wa][ddm][thread_entry:463]Child thread errno address:0xb0bff918 starting fp process..! [copyrange = 1024, nf queue id = 1, http = 1, upnp = 1, mdns = 1] meshctl -> fp binary started sh: /sbin/wdp: not found meshctl -> wdp binary started meshctl LocalAnalyticsEnable is on! [ndbus][dbus][6919: 0xb650f450][102.645156][wa][lae][ndbusMainLoop:555]Main thread errno address:0xb650f928 [ndbus][dbus][6919: 0xb62ff450][102.646502][wa][lae][thread_entry:463]Child thread errno address:0xb62ff928 mkdir: can't create directory '/tmp/ddm': File exists Server: Started Port: 8099 Socket: Initialized Reuse Port 8099: Enabled Ip Address: 0.0.0.0 Binding: Success Listen: Success Server is now waiting for clients to connect ... wl: Unsupported Signal Sent meshctl -> lae binary startedcsv_sprintf_fmt 79 csv_sprintf_fmt 79 csv_sprintf_fmt 79 mkdir: can't create directory '/tmp/ddm': File exists Server: Started Port: 8099 Socket: Initialized Reuse Port 8099: Enabled Ip Address: 0.0.0.0 Binding: Success Listen: Success Server is now waiting for clients to connect ... Signal Sent Signal Sent set 24g phy_ed_thresh to -60 Signal Sent wl: Unsupported lae: [channel_change.c main:884] [ea_channel_change] App executed !!! [ndbus][dbus][7154: 0xb6f5d000][119.313439][wa][ea_channel_chan][ndbusMainLoop:555]Main thread errno address:0xb6f5d4d8 [ndbus][dbus][7154: 0xb63c4450][119.319263][wa][ea_channel_chan][thread_entry:463]Child thread errno address:0xb63c4928 csv_sprintf_fmt 79 csv_sprintf_fmt 79 csv_sprintf_fmt 79 csv_sprintf_fmt 79 wl: Unsupported check certificate files before backup files... /bcm/script/check_certificate_files.sh: cd: line 37: can't cd to /configs/X509 /bcm/script/check_certificate_files.sh: cd: line 48: can't cd to /logs/configs_key_data_bak/X509 certificate files are damaged in both /configs and /logs, cannot fix! wl: Unsupported wl: Unsupported wl: Unsupported wl: Unsupported wl: Unsupported raise alarm for pon_210_0_1 raise alarm for pon_220_4_1 [12-31 22:03:03][OMCI]OMCI app Wan_Alarm connection_Id 1 alarmtype 0 status 0 [12-31 22:03:03][OMCI]OMCI app Wan_Alarm connection_Id 1 alarmtype 1 status 1 state == OMCI_ALM_ACTIVE alarm_bit_mask=0x80 state == OMCI_ALM_INACTIVE [12-31 22:03:03][OMCI]OMCI app Wan_Alarm connection_Id 2 alarmtype 0 status 0 alarm_bit_mask=0x40 [12-31 22:03:03][OMCI]OMCI app Wan_Alarm connection_Id 2 alarmtype 1 status 1 state == OMCI_ALM_ACTIVE alarm_bit_mask=0x20 state == OMCI_ALM_INACTIVE alarm_bit_mask=0x10 wl: Unsupported wl: Unsupported ++++ ===== Serial ===== {{ :ont:wdsc_0308_uart.jpg?direct&200 |}} 3,3V, baud 115200, 8 bits, no parity, 1 stop bit, idle 1. Um shell/CLI limitado está disponível pela porta serial: user> help Zebra VTY provides advanced help feature. When you need help, anytime at the command line please press '?'. If nothing matches, the help list will be empty and you must backup until entering a '?' shows the available options. Two styles of help are provided: 1. Full help is available when you are ready to enter a command argument (e.g. 'show ?') and describes each possible argument. 2. Partial help is provided when an abbreviated argument is entered and you want to know what arguments match the input (e.g. 'show me?'.) user> enable Turn on privileged mode command help Description of the interactive help system list Print command list show Show running system information user> show version Zebra 0.95 (mips-linux). Copyright 1996-2004, Kunihiro Ishiguro. user> enable user# ? configure Configuration from vty interface disable Turn off privileged mode command exit Exit current mode and down to previous mode help Description of the interactive help system list Print command list logout logout and byebye. nslookup Query nameserver for the specified host ntp Date and time in UTC that of the CPE when it sync with SNTP server. ping Send echo messages shell start shell, need to input the dynamic password show Show information from vty interface tftp Transfer syslog,omci,voice log to tftp server. traceroute trace route about a host user# list configure disable exit help list logout nslookup HOST [SERVER] ntp date ping [-c COUNT] [-s SIZE] [-I IFACE or ip] [-W SEC] [-w SEC] {hostname or ip} shell show tftp (syslog|omci|voice) HOST traceroute [-m MAXTTL] [-p PORT] [-q NQUERIES] [-w WAIT_SEC] [-i IFACE] HOST [BYTES] user(show)# ? arp Displays system arp cache buildinfo Display build info. cpu Displays cpu utilization dns Displays DNS info end End current mode and down to previous mode exit Exit current mode and down to previous mode help Description of the interactive help system hspa Displays hspa info hwversion Displays the hardware version info igmp Displays igmp information ip Displays IPv4 information lan Displays lan configuration list Print command list logfile Display the content of module log file. mem Displays memory utilization nat Displays NAT information network Displays network information reboot Displays cause of last reboot ridump Display RI info. route Displays kernel IPv4 and IPv6 routing tables serialnum show serial number swversion Displays the software version info info sysinfo Displays system information sysmon Displays active processes virtualserver Show virtual server info voice Displays voice information wan Displays wan info wifi Show wifi client list informationShow wifi client list information wlan Displays WiFi paramters user(show)# list arp buildinfo cpu dns end exit help hspa modem hwversion igmp ip default-gateway ip route lan ip dhcp lan ip hosts lan ipv6 dhcp lan ipv6 hosts lan stats list logfile (syslog|omci|voice) mem nat count [A.B.C.D] nat entries [A.B.C.D] nat rules network interface (IFNAME|all) reboot ridump route serialnum swversion sysinfo sysmon virtualserver voice port voice status wan (WAN1|WAN2|WAN3|WAN4|WAN5|WAN6|WAN7|WAN8|all) statistics wan (WAN1|WAN2|WAN3|WAN4|WAN5|WAN6|WAN7|WAN8|all) status wan (WAN1|WAN2|WAN3|WAN4|WAN5|WAN6|WAN7|WAN8|all) uptime wifi client list wlan user(show)# sysmon PID PPID USER STAT VSZ %MEM CPU %CPU COMMAND 1957 1 root S 204m 42.8 1 2.2 ./voip 11599 11598 root R 4288 0.8 0 2.2 top -b -n1 ... 2268 2 root SW 0 0.0 0 0.0 [kworker/0:29] 2275 2 root SW 0 0.0 1 0.0 [kworker/1:18] 2284 2 root SW< 0 0.0 1 0.0 [kworker/1:1H] user(config)# ? end End current mode and down to previous mode exit Exit current mode and down to previous mode help Description of the interactive help system list Print command list logsrv set SFTP value to DB for uploading logs rsyslog Configure rsyslog file size and beacon log level. syslog Configure syslog file number and file size. user(config)# list end exit help list logsrv ENABLE SRVIP SFTPUSERNAME SFTPPW RPATH ULTYPE MINUTE_STIME HOUR_STIME DAY_STIME MONTH_STIME WEEK_STIME rsyslog [rgw_fs INT] [rgw_lv INT] [beacon_fs INT] [beacon_lv INT] [remote_ip A.B.C.D] [persistent FLAG] syslog filenum <1-5> filesize <1-5> [persistent FLAG] user# shell Password: Password: Password: login will be forbidden about 300s because of the continuous authentication failure (over 3 times) Esta senha é dinâmica e calculada a partir do serial ("G984Serial"), portanto única para cada dispositivo. Caso o prompt que apareça solicitando a senha seja "Password:", é possível gerá-la com os algoritmos conhecidos. Caso seja "Password2:", não é possível. É possível parar o U-Boot (bootloader) pressionando alguma tecla no momento correto. Ao fazer isto, nenhuma mensagem é exibida, mas o G-140W-H na verdade está esperando login (3 tentativas permitidas antes de um reboot): ... Voice Board Configuration (0-33) : LE9652_ZSI_IB Partition 1 Size (MB) : Partition 2 Size (MB) : Partition 3 Size (MB) : Partition 4 Size (MB) (Data) : 4MB *** Press any key to stop auto run (1 seconds) *** Auto run second count down: 0 login without authorization. login without authorization. login without authorization. Resetting board in 0 seconds...---- BTRM V1.1 MEMP CACH .... Esta senha também é calculada a partir do serial. ===== SSH & Telnet ===== Os serviços estão rodando e escutando nas portas padrões, mas estão bloqueados pelo firewall do aparelho. Para ativa-los, é necessário acessar o menu "Access Control", disponível apenas após login com usuário privilegiado (AdminGPON). ===== Serial GPON ===== Atenção: caso o aparelho permaneça configurado em algum //OperatorID// cujas senhas sejam baseadas no serial, ao troca-lo e realizar um //factory reset// no aparelho, elas serão recalculadas! Portanto, deverão ser geradas novamente como fez da primeira vez para retornar o acesso. É possível alterar o serial GPON através do shell privilegiado. Supondo que queira definir o novo serial para XYWZAABBCCDD: 1. Obtenha uma cópia dos dados permanentes do seu aparelho e anote em algum lugar: # ritool dump 2. Altere o serial GPON conforme desejado, onde "aabbccdd" são os últimos 8 dígitos, em minúsculo, e "XYWZAABBCCDD" o serial completo. # ritool set OperatorID 0000 # ritool set MfrID XYWZ # ritool set G984Serial aabbccdd # ritool set YPSerialNum XYWZAABBCCDD 3. Retorne o OperatorID para o original do aparelho, obtido no dump do primeiro passo (substitua os ????): # ritool set OperatorID ???? Para referência, o OperatorID da Oi é BRZL. ===== Logs e informações ===== # cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 100.00 Features : half thumb fastmult edsp tls idiva idivt lpae CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 processor : 1 model name : ARMv7 Processor rev 5 (v7l) BogoMIPS : 100.00 Features : half thumb fastmult edsp tls idiva idivt lpae CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : BCM96846 Revision : 0000 Serial : 0000000000000000 # cat /proc/version Linux version 4.1.45 (buildmgr@AONT26) (gcc version 5.3.0 (Buildroot 2016.02) ) #1 SMP PREEMPT Tue Mar 31 23:13:58 CST 2020 # cat /proc/mtd dev: size erasesize name mtd0: 00080000 00020000 "boot" mtd1: 00080000 00020000 "nvram" mtd2: 02800000 00020000 "image0" mtd3: 02800000 00020000 "image1" mtd4: 00f00000 00020000 "logfs" mtd5: 00800000 00020000 "cfgfs" mtd6: 00600000 00020000 "extfs" mtd7: 01200000 00020000 "diagfs" mtd8: 08000000 00020000 "datafs" mtd9: 02226000 0001f000 "rootfs_ubifs" mtd10: 0001f000 0001f000 "METADATA" mtd11: 0001f000 0001f000 "METADATACOPY" mtd12: 002ee647 0001f000 "filestruct_full.bin" mtd13: 00d90000 0001f000 "0" mtd14: 006c8000 0001f000 "1" mtd15: 07918000 0001f000 "0" # cat /proc/mounts /dev/root / squashfs ro,relatime 0 0 devtmpfs /dev devtmpfs rw,relatime,size=243872k,nr_inodes=60968,mode=755 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 tmpfs /dev tmpfs rw,relatime 0 0 tmpfs /etc tmpfs rw,relatime,size=32768k 0 0 devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0 tmpfs /dev/shm tmpfs rw,relatime 0 0 /mnt /mnt tmpfs rw,relatime,size=1024k,mode=755 0 0 /var /var tmpfs rw,nosuid,nodev,noexec,relatime 0 0 none /tmp tmpfs rw,nosuid,nodev,noexec,relatime 0 0 /dev/ubi4_0 /logs ubifs rw,relatime 0 0 /dev/ubi5_0 /configs ubifs rw,relatime 0 0 /dev/ubi8_0 /flash ubifs rw,relatime 0 0 /dev/sda2 /mnt/usb1_2 vfat rw,relatime,uid=111,fmask=0000,dmask=0000,allow_utime=0022,codepage=936,iocharset=cp936,shortname=mixed,errors=remount-ro 0 0 # cat /proc/modules xt_mac 631 0 - Live 0xbffaf000 xt_NFQUEUE 1971 0 - Live 0xbffab000 nfnetlink_queue 7894 1 - Live 0xbffa6000 koffload 4102 0 - Live 0xbffa1000 (O) xt_statistic 833 18 - Live 0xbff9d000 xt_multiport 1281 2 - Live 0xbff99000 xt_hashlimit 6271 12 - Live 0xbff94000 xt_mark 702 9 - Live 0xbff90000 nf_nat_pptp 1764 0 - Live 0xbff8c000 nf_nat_proto_gre 825 1 nf_nat_pptp, Live 0xbff88000 nf_conntrack_pptp 3266 1 nf_nat_pptp, Live 0xbff84000 nf_conntrack_proto_gre 3115 1 nf_conntrack_pptp, Live 0xbff80000 nf_nat_rtsp 3078 0 - Live 0xbff7c000 nf_conntrack_rtsp 6643 1 nf_nat_rtsp, Live 0xbff77000 nf_nat_sip 7240 0 - Live 0xbff72000 nf_conntrack_sip 17635 1 nf_nat_sip, Live 0xbff6a000 nf_nat_h323 5434 0 - Live 0xbff65000 nf_nat_tftp 603 0 - Live 0xbff61000 nf_conntrack_tftp 2788 1 nf_nat_tftp, Live 0xbff5d000 nf_nat_ftp 1243 0 - Live 0xbff59000 nf_conntrack_netlink 17107 0 - Live 0xbff51000 xt_TCPMSS 2593 6 - Live 0xbff4d000 xt_DSCP 1459 1 - Live 0xbff49000 ip6t_REJECT 1266 12 - Live 0xbff45000 nf_reject_ipv6 1964 1 ip6t_REJECT, Live 0xbff41000 ipt_REJECT 930 12 - Live 0xbff39000 nf_reject_ipv4 1720 1 ipt_REJECT, Live 0xbff35000 nf_conntrack_ipv6 6828 20 - Live 0xbff2b000 nf_defrag_ipv6 13626 1 nf_conntrack_ipv6, Live 0xbff23000 nf_log_ipv6 3564 10 - Live 0xbff1f000 nf_log_ipv4 3156 13 - Live 0xbff1b000 nf_log_common 2212 2 nf_log_ipv6,nf_log_ipv4, Live 0xbff17000 xt_conntrack 2419 46 - Live 0xbff13000 xt_state 765 0 - Live 0xbff0f000 xt_LOG 817 23 - Live 0xbff0b000 usb_storage 38839 1 - Live 0xbfef8000 xt_SKIPLOG 519 2 - Live 0xbfef4000 dsphal 51083 3 - Live 0xbfee1000 dhcpdrv 2352 1 - Live 0xbfedd000 (O) kigmp 277804 0 - Live 0xbfe89000 (O) ipip 3633 0 - Live 0xbfe85000 ip_gre 7324 0 - Live 0xbfe80000 gre 3007 1 ip_gre, Live 0xbfe7c000 dying_gasp 2668 0 - Live 0xbfe78000 (PO) wl 4306432 0 - Live 0xbf9ef000 (P) wlemf 68036 1 wl, Live 0xbf9d6000 (P) wfd 15164 1 wl, Live 0xbf9ce000 bcmmcast 49370 2 wlemf,wfd, Live 0xbf9bb000 bcmhook 5487 3 koffload,kigmp,wl, Live 0xbf9b6000 (O) bcm_usb 932 0 - Live 0xbf9ac000 ohci_platform 3424 0 - Live 0xbf9a8000 ohci_hcd 22965 1 ohci_platform, Live 0xbf99e000 ehci_platform 3927 0 - Live 0xbf99a000 ehci_pci 2766 0 - Live 0xbf996000 ehci_hcd 32203 2 ehci_platform,ehci_pci, Live 0xbf98a000 ip6table_raw 622 0 - Live 0xbf986000 ip6table_mangle 970 1 - Live 0xbf982000 ip6table_filter 650 1 - Live 0xbf97e000 ip6_tables 9321 3 ip6table_raw,ip6table_mangle,ip6table_filter, Live 0xbf978000 iptable_nat 894 1 - Live 0xbf974000 nf_nat_ipv4 3653 1 iptable_nat, Live 0xbf970000 nf_conntrack_ipv4 11560 35 - Live 0xbf969000 nf_defrag_ipv4 850 1 nf_conntrack_ipv4, Live 0xbf965000 nf_conntrack_h323 35558 1 nf_nat_h323, Live 0xbf956000 nf_conntrack_ftp 5671 1 nf_nat_ftp, Live 0xbf951000 nfnetlink 4096 3 nfnetlink_queue,nf_conntrack_netlink, Live 0xbf94d000 xt_nat 1171 0 - Live 0xbf949000 nf_nat 10081 9 nf_nat_pptp,nf_nat_proto_gre,nf_nat_rtsp,nf_nat_sip,nf_nat_h323,nf_nat_tftp,nf_nat_ftp,nf_nat_ipv4,xt_nat, Live 0xbf942000 iptable_mangle 850 1 - Live 0xbf93e000 iptable_filter 706 1 - Live 0xbf93a000 ip_tables 9041 3 iptable_nat,iptable_mangle,iptable_filter, Live 0xbf934000 pktrunner 806950 0 - Live 0xbf869000 (P) bcmbrfp 5805 0 - Live 0xbf864000 bcmdrv 212094 8 koffload,dhcpdrv,kigmp,dying_gasp,bcmhook, Live 0xbf816000 (PO) phyadpt 12913 1 dying_gasp, Live 0xbf80e000 (O) dp_rm 2552 2 - Live 0xbf80a000 (O) bcmgpon 156320 1 bcmdrv, Live 0xbf7d7000 (P) gponstack 459050 4 bcmdrv,bcmgpon, Live 0xbf73d000 (P) bcmvlan 109496 0 - Live 0xbf718000 (P) bcm_enet 64133 5 wl,bcmdrv,phyadpt,bcmgpon,bcmvlan, Live 0xbf6ff000 rdpa_mw 32608 3 pktrunner,bcmbrfp,bcmvlan, Live 0xbf6f1000 usblp 8696 0 - Live 0xbf6eb000 pmd 47100 2 bcmgpon,gponstack, Live 0xbf6d9000 (P) bcm_bpm 8293 0 [permanent], Live 0xbf6d3000 (P) pktflow 161326 2 pktrunner,bcmdrv, Live 0xbf6a3000 (P) rdpa 4068071 1 bcmgpon, Live 0xbf23f000 (P) rdpa_gpl_ext 891 2 bcmdrv,bcmgpon, Live 0xbf23b000 rdpa_gpl 15641 9 kigmp,wfd,pktrunner,bcmbrfp,bcmdrv,bcmgpon,bcm_enet,rdpa_mw,rdpa, Live 0xbf22d000 bcm_pondrv 189991 5 bcmdrv,bcmgpon,gponstack,rdpa_mw,pmd, Live 0xbf1f0000 (P) bdmf 1238066 11 kigmp,wfd,pktrunner,bcmbrfp,bcmdrv,bcmgpon,gponstack,bcm_enet,rdpa_mw,rdpa,rdpa_gpl, Live 0xbf0b0000 bcm_pcie_hcd 18223 0 - Live 0xbf0a7000 wlcsm 5541 3 wl,wlemf,bcm_pcie_hcd, Live 0xbf0a2000 (P) pwrmngtd 1895 0 - Live 0xbf09e000 (P) button_driver 11528 0 - Live 0xbf097000 (O) drv_dxs 85627 1 - Live 0xbf07c000 (O) drv_tapi 159703 3 drv_dxs, Live 0xbf04c000 (O) drv_ifxos 14705 2 drv_dxs,drv_tapi, Live 0xbf042000 (O) bosa_semetech 17241 2 bcmdrv,gponstack, Live 0xbf039000 (O) led_drv 19319 3 usb_storage,dying_gasp,bcm_enet, Live 0xbf029000 (O) netlinkmsg 13634 5 usb_storage,bcmdrv,button_driver,bosa_semetech, Live 0xbf022000 (O) gpio_mgr 6937 5 dying_gasp,button_driver,drv_dxs,bosa_semetech,led_drv, Live 0xbf017000 (O) hcfg 2236 9 kigmp,dying_gasp,bcmdrv,bcmvlan,button_driver,bosa_semetech,led_drv,netlinkmsg,gpio_mgr, Live 0xbf013000 (O) scfg 18972 5 kigmp,bcmdrv,bosa_semetech,gpio_mgr,hcfg, Live 0xbf00a000 (O) extfs 9515 2 bosa_semetech,scfg, Live 0xbf004000 (O) nand_drv 2688 1 extfs, Live 0xbf000000 (O) # cat /proc/cmdline coherent_pool=2M cpuidle_sysfs_switch pci=pcie_bus_safe bootversion=Mar-31-2020--23:07:20 # cat /proc/socinfo SoC Name :BCM68461 Revision :A1 == Agradecimentos == Pessoas envolvidas em discussões, dicas ou bate papo em geral. Lista em ordem alfabética. T1AGO